April 2017 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sat Apr 1 05:01:03 PDT 2017
Ending: Sun Apr 30 03:19:34 PDT 2017
Messages: 219

• [source] apm821xx: Add default packages to NAND target   LEDE Commits
• [source] apm821xx: Merge the Cisco Meraki MX60 & MX60W   LEDE Commits
• [source] apm821xx: remove 4.4 kernel support   LEDE Commits
• [source] ar71xx: add correct named default wireless led by using platform leds   LEDE Commits
• [source] ar71xx: Add OTP support for AR934x   LEDE Commits
• [source] ar71xx: add TP-LINK TL-WR841N/ND v12 image   LEDE Commits
• [source] ar71xx: add TP-LINK TL-WR841N/ND v12 image   LEDE Commits
• [source] ar71xx: add userspace support for Mikrotik RB2011iL   LEDE Commits
• [source] ar71xx: fix ath9k default LED changes fallout   LEDE Commits
• [source] ar71xx: fix minor syntax error in /lib/upgrade/platform.sh   LEDE Commits
• [source] ar71xx: fix minor syntax error in /lib/upgrade/platform.sh   LEDE Commits
• [source] ar71xx: fix Wallys DR344 ethernet MAC addresses offsets   LEDE Commits
• [source] ar71xx: fold 641-MIPS-ath79-fix-AR934x-OTP-offsets.patch into the patch that it fixes   LEDE Commits
• [source] ar71xx: select ATH79_NVRAM only by boards actually use it   LEDE Commits
• [source] ar71xx: tp-link.mk: always include device version in image and DEVICE_TITLE   LEDE Commits
• [source] arm64: remove linux 4.4 support   LEDE Commits
• [source] arm64: Remove Vexpress Foundation support   LEDE Commits
• [source] arm64: Switch to 4.9 kernel   LEDE Commits
• [source] arm64: Update README   LEDE Commits
• [source] armvirt: merge arm64 as subtarget 64   LEDE Commits
• [source] ath10k-firmware: update the qca988x firmware to 10.2.4-1.0-00029   LEDE Commits
• [source] ath10k-firmware: update to latest version   LEDE Commits
• [source] ath9k: drop obsolete patch   LEDE Commits
• [source] ath9k: enable GPIO chip only if requested via DT   LEDE Commits
• [source] ath9k: ignore led_pin if ath9k GPIO controller is used with DT   LEDE Commits
• [source] ath9k: unset the default LED pin if used by platform leds   LEDE Commits
• [source] base-files: use restart if no reload hook for service   LEDE Commits
• [source] bcm53xx: backport BCM5301X patches   LEDE Commits
• [source] bcm53xx: backport DT patches for serial, thermal and MDIO   LEDE Commits
• [source] bcm53xx: enable Northstar thermal driver   LEDE Commits
• [source] bcm53xx: parepare for building more Linksys images   LEDE Commits
• [source] bcm53xx: prepare for building Archer C5 V2 image   LEDE Commits
• [source] binutils: fix build with host gcc < 4.9   LEDE Commits
• [source] brcm2708: disable CONFIG_BCM2835_THERMAL by default   LEDE Commits
• [source] brcm63xx: Add Observa VH4032N support   LEDE Commits
• [source] build: allow specifying flow-control to grub on serial console   LEDE Commits
• [source] build: fix aarch64 default cpu selection   LEDE Commits
• [source] build: fix symlinked .config handling   LEDE Commits
• [source] build: fix triggering opkg/host compilation   LEDE Commits
• [source] build: move PKG_CONFIG_DEPENDS from feeds.mk to opkg   LEDE Commits
• [source] build: remove package makefile overlay functionality   LEDE Commits
• [source] busybox: add musl compatible nslookup replacement   LEDE Commits
• [source] busybox: add musl compatible nslookup replacement   LEDE Commits
• [source] busybox: add musl compatible nslookup replacement   LEDE Commits
• [source] busybox: don't install NTP scripts if NTP isn't configured   LEDE Commits
• [source] busybox: don't install NTP scripts if NTP isn't configured   LEDE Commits
• [source] busybox: Enable sendfile by default   LEDE Commits
• [source] busybox: fix build of nslookup_lede applet without IPv6 (#728)   LEDE Commits
• [source] busybox: fix build of nslookup_lede applet without IPv6 (#728)   LEDE Commits
• [source] busybox: fix installation of cron and ntpd scripts in the default config   LEDE Commits
• [source] busybox: Move libresolv detection to LEDE Makefile   LEDE Commits
• [source] busybox: Move libresolv detection to LEDE Makefile   LEDE Commits
• [source] busybox: nslookup_lede: fix compatibility with v1.25   LEDE Commits
• [source] busybox: nslookup_lede: fix compatibility with v1.25   LEDE Commits
• [source] busybox: nslookup_lede: mimic output format of old Busybox applet   LEDE Commits
• [source] busybox: nslookup_lede: mimic output format of old Busybox applet   LEDE Commits
• [source] busybox: revert accidential version bump   LEDE Commits
• [source] cns3xxx: enable mpcore watchdog   LEDE Commits
• [source] cns3xxx: fix mpcore watchdog   LEDE Commits
• [source] cns3xxx: refresh kernel config   LEDE Commits
• [source] cns3xxx: remove linux 4.4 support   LEDE Commits
• [source] cns3xxx: use proper macro's for ID handling   LEDE Commits
• [source] dnsmasq: fix uninitialized varname in init-script   LEDE Commits
• [source] dnsmasq: peacefully coexist with ISC DHCPd   LEDE Commits
• [source] dnsmasq: support dhcp_option config as a list   LEDE Commits
• [source] dropbear: fix procd interface trigger install   LEDE Commits
• [source] feeds: add option to force feed update despite modified files   LEDE Commits
• [source] firmware: rework fritz-tools package   LEDE Commits
• [source] generic: keep module aliases inside .modinfo   LEDE Commits
• [source] generic: mtd: backport mx25u25635f stateless 4b support   LEDE Commits
• [source] generic: rtl8366rb: add support for initvals from DTS   LEDE Commits
• [source] grub2: update to 2.02~rc2   LEDE Commits
• [source] image.mk: force kernel rebuild on every run   LEDE Commits
• [source] imx6: apply upstream mmc fix for DDR50 cards on UHS-I capable boards   LEDE Commits
• [source] imx6: disable MSI interrupts   LEDE Commits
• [source] imx6: ventana: add GW553x board identification   LEDE Commits
• [source] include/image.mk: allow passing a compat string to the NAND image template   LEDE Commits
• [source] include/packages-defaults.mk: Remove LARGEFILE option   LEDE Commits
• [source] ipq8064: fix dwc3-of-simple module unloading for Netgear R7500   LEDE Commits
• [source] ipq8064: Fix dwc3 module unloading   LEDE Commits
• [source] iproute2: add libgenl.h and ll_map.h to InstallDev section   LEDE Commits
• [source] iptables: bump to 1.6.1   LEDE Commits
• [source] iptables: fix wrong depends for nftables support (FS#707)   LEDE Commits
• [source] iptables: set ABI_VERSION to force rebuild of dependent packages   LEDE Commits
• [source] kernel: add thermal monitor for nct6775/6776   LEDE Commits
• [source] kernel: Add various arm64-related symbols   LEDE Commits
• [source] kernel: backport Broadcom thermal drivers   LEDE Commits
• [source] kernel: Fix the incorrect i_nlink count after jffs2's RENAME_EXCHANGE operations.   LEDE Commits
• [source] kernel: fix ubi auto attach logging   LEDE Commits
• [source] kernel: make kmod-mmc unavailable on UML   LEDE Commits
• [source] kernel: move initramfs's init script out of base-files   LEDE Commits
• [source] kernel: remove out of tree direct-io disable hack   LEDE Commits
• [source] kernel: update kernel 4.4 to 4.4.59   LEDE Commits
• [source] kernel: update kernel 4.4 to 4.4.59   LEDE Commits
• [source] kernel: update kernel 4.4 to 4.4.61   LEDE Commits
• [source] kernel: update kernel 4.4 to 4.4.61   LEDE Commits
• [source] kernel: update kernel 4.9 to 4.9.20   LEDE Commits
• [source] kernel: update MIPS pci fix to the accepted version   LEDE Commits
• [source] kernel: use skb_cow_head() to deal with cloned skbs   LEDE Commits
• [source] kernel: use skb_cow_head() to deal with cloned skbs   LEDE Commits
• [source] kexec-tools: get kexec running on MUSL and x86 hardware   LEDE Commits
• [source] lantiq: DGN3500: make switch LEDs blink on activity   LEDE Commits
• [source] lantiq: drop tffs patches   LEDE Commits
• [source] lantiq: improve DGN3500 LED definitions   LEDE Commits
• [source] LEDE v17.01.1: adjust config defaults   LEDE Commits
• [source] libubox: add host build   LEDE Commits
• [source] libubox: fix host build on macOS   LEDE Commits
• [source] mac80211: add rt2x00 debug symbols to PKG_CONFIG_DEPENDS   LEDE Commits
• [source] mac80211: backport an upstream fix for queue start/stop handling   LEDE Commits
• [source] mac80211: backport an upstream fix for queue start/stop handling   LEDE Commits
• [source] mac80211: Backport AR934x OTP Patch   LEDE Commits
• [source] mac80211: conistent wireless.wiki.kernel.org   LEDE Commits
• [source] mac80211: fix kconfig recursive dependency warning   LEDE Commits
• [source] mac80211: manually apply dependencies to prevent a recoursive one   LEDE Commits
• [source] mac80211: rt2800: fix mt7620 E2 channel registers   LEDE Commits
• [source] mac80211: rt2800: fix mt7620 vco calibration registers   LEDE Commits
• [source] mac80211: rt2x00: add incomplete support for external PA on MT7620   LEDE Commits
• [source] mac80211: rt2x00: fix MT7620 LNA gain and VCO-after-ALC   LEDE Commits
• [source] mac80211: rt2x00: reorder patches and prepare for MT7620 external PA   LEDE Commits
• [source] mdadm: extend uci config support   LEDE Commits
• [source] mediatek: add DSA multi cpu port support   LEDE Commits
• [source] mediatek: add support for the NAND-ePHY board   LEDE Commits
• [source] mediatek: fix mt7530 mcm reset   LEDE Commits
• [source] mediatek: fix support for gmac1 using external PHY   LEDE Commits
• [source] mediatek: fix sysupgrade board detection   LEDE Commits
• [source] mediatek: various fixes for v4.9   LEDE Commits
• [source] modules: Add kmod-igbvf kernel module for Intel(R) 82576 Virtual Function Ethernet adapters   LEDE Commits
• [source] mt76: ensure that the metapackage gets built as .ipk   LEDE Commits
• [source] mt76: ensure that the metapackage gets built as .ipk   LEDE Commits
• [source] mvebu: remove linux 4.4 support   LEDE Commits
• [source] netifd: fix fw3 warnings in dhcp script   LEDE Commits
• [source] netifd: return error status in reload_service   LEDE Commits
• [source] netifd: update to git HEAD version   LEDE Commits
• [source] odhcpd: update to git HEAD version   LEDE Commits
• [source] odhcpd: update to git HEAD version (FS#635)   LEDE Commits
• [source] odhcpd: update to git HEAD version (FS#656,FS#595)   LEDE Commits
• [source] odhcpd: update to version 2017-02-21   LEDE Commits
• [source] odhcpd: update to version 2017-02-28   LEDE Commits
• [source] odhcpd: update to version 2017-03-29 (FS#635)   LEDE Commits
• [source] omap/Kconfig: add omap2plus_cpufreq   LEDE Commits
• [source] omap/Kconfig: add usb options   LEDE Commits
• [source] omap/Kconfig: enable SMP   LEDE Commits
• [source] omap/Kconfig: refresh by oldconfig   LEDE Commits
• [source] omap: correct CPU_TYPE: omaps are cortext-a8   LEDE Commits
• [source] omap: rework image generation and profiles   LEDE Commits
• [source] openssl: Use mkhash for STAMP_CONFIGURED   LEDE Commits
• [source] openvpn: add myself as maintainer   LEDE Commits
• [source] OpenVPN: Update to 2.4.1   LEDE Commits
• [source] opkg: backport upstream fixes, code cleanups   LEDE Commits
• [source] opkg: switch to LEDE fork (#120, #551, #571)   LEDE Commits
• [source] package/uboot-omap: add am335x_boneblack   LEDE Commits
• [source] package/uboot-omap: add default uEnv to boot via mmc card   LEDE Commits
• [source] package/uboot-omap: assign BUILD_DEVICES most boards   LEDE Commits
• [source] package/uboot-omap: install image to STAGING_DIR_IMAGE   LEDE Commits
• [source] package/uboot-omap: re-introduce patches dropped by update to v2017.01   LEDE Commits
• [source] ramips: add former board names to PSG1218 variants   LEDE Commits
• [source] ramips: add former used board names to metadata   LEDE Commits
• [source] ramips: add ip17xx support to WLI-TX4-AG300N   LEDE Commits
• [source] ramips: add RP-N53 pcie wireless eeprom   LEDE Commits
• [source] ramips: add RP-N53 pcie wireless eeprom   LEDE Commits
• [source] ramips: add support for Netgear WN3000RPv3   LEDE Commits
• [source] ramips: add support for Sanlinking D240   LEDE Commits
• [source] ramips: add support for ZBT-WE1326   LEDE Commits
• [source] ramips: add ZBT-WE826 32MB variant   LEDE Commits
• [source] ramips: Clean duplicated status property for Omega2 WMAC in dtsi   LEDE Commits
• [source] ramips: cleanup SPI flash device tree properties usage   LEDE Commits
• [source] ramips: correct keenetic-series switch index   LEDE Commits
• [source] ramips: dont replace the board name   LEDE Commits
• [source] ramips: drop rt-n56u factory image   LEDE Commits
• [source] ramips: fixed sms led polarity into dwr-512 DT   LEDE Commits
• [source] ramips: fix EX2700 wireless mac   LEDE Commits
• [source] ramips: fix mac address of miwifi-mini   LEDE Commits
• [source] ramips: fix Netgear R6220 package selection   LEDE Commits
• [source] ramips: fix Sercomm NA930 compatible string   LEDE Commits
• [source] ramips: fix syntax error in board.d/01_leds   LEDE Commits
• [source] ramips: fix WHR-600D eeprom dt property   LEDE Commits
• [source] ramips: fix WHR-600D eeprom dt property   LEDE Commits
• [source] ramips: fix ZyXEL Keenetic Omni/Omni II GPIOs   LEDE Commits
• [source] ramips: fix ZyXEL Keenetic Omni switch config   LEDE Commits
• [source] ramips: prepare ZBT-WG3526 for hardware variants   LEDE Commits
• [source] ramips: really drop the rt-n56u factory image   LEDE Commits
• [source] ramips: remove DT pcie nodes for GL-MT300A/N   LEDE Commits
• [source] ramips: remove Planex CS-QR10 sound device tree node   LEDE Commits
• [source] ramips: rename Digineo AC1200 Pro to ZBT-WG3526 32MB   LEDE Commits
• [source] ramips: rename PSG1218 to match label   LEDE Commits
• [source] ramips: split Phicomm PSG1218 and PSG1218K2C   LEDE Commits
• [source] ramips: update DEVICE_PACKAGES for Ubiquiti EdgeRouter X   LEDE Commits
• [source] ramips: update DEVICE_PACKAGES for Ubiquiti EdgeRouter X   LEDE Commits
• [source] ramips: use the ZBT-WE826 power LED for status indication   LEDE Commits
• [source] ramips: WN3000RPv3: do not setup switch   LEDE Commits
• [source] ramips: WN3000RPv3: do not setup switch   LEDE Commits
• [source] ramips: ZBT-WE826: include the correct dtsi   LEDE Commits
• [source] ramips: ZTE-Q7: fix switch driver initialization in DTS (FS#716)   LEDE Commits
• [source] ramips: ZyXEL Keenetic Omni/Omni2: export gpio usb power   LEDE Commits
• [source] ramips: ZyXEL Keenetic Omni align factory images   LEDE Commits
• [source] ramips: ZyXEL Keenetic series update wan mac   LEDE Commits
• [source] ramips: ZyXEL Keenetic Viva: align factory images   LEDE Commits
• [source] ramips: ZyXEL Keenetic Viva: export gpio usb power   LEDE Commits
• [source] Revert "mvebu: remove linux 4.4 support"   LEDE Commits
• [source] rpcd: Explicitly link with lcrypt   LEDE Commits
• [source] scripts/download.pl: fix error message on hash mismatch   LEDE Commits
• [source] scripts/qemustart: initial version   LEDE Commits
• [source] sysntpd: restore support for peer-less (standalone) mode   LEDE Commits
• [source] target.mk: check that CPU_TYPE has known CPU_CFLAGS mapping   LEDE Commits
• [source] tools: host/include/getline.h: Remove   LEDE Commits
• [source] u-boot.mk: pass HOSTCC and HOST_CFLAGS into the build   LEDE Commits
• [source] uboot-ar71xx: fix build error   LEDE Commits
• [source] uboot-lantiq: fix build error on mac os x   LEDE Commits
• [source] uboot-omap: enable thumb for overo   LEDE Commits
• [source] uboot-omap: rename patch to 101-disable-thumb-omap3.patch   LEDE Commits
• [source] ubox: bump to version 2017-03-10   LEDE Commits
• [source] ugps: fix and improve init script   LEDE Commits
• [source] util-linux: re-enable parallel builds   LEDE Commits
• [source] util-linux: unconditionally enable ncursesw support   LEDE Commits
• [source] utils/f2fs-tools: Update to 1.8.0   LEDE Commits
• [source] utils/mdadm: Update to 4.0   LEDE Commits
• [source] utils/util-linux: Update to 2.29.2   LEDE Commits
• [source] x86: enable 4G high memory support for generic (32bit) subtarget   LEDE Commits
• [source] x86: enable 4G high memory support for generic (32bit) subtarget   LEDE Commits

Last message date: Sun Apr 30 03:19:34 PDT 2017
Archived on: Sun Apr 30 03:20:09 PDT 2017

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...