[source] kernel: update kernel 4.9 to 4.9.20

LEDE Commits lede-commits at lists.infradead.org
Sun Apr 2 05:04:21 PDT 2017


hauke pushed a commit to source.git, branch master:
https://git.lede-project.org/b26e34214c3d3aea9792c950d5e7fdb5bc5412b1

commit b26e34214c3d3aea9792c950d5e7fdb5bc5412b1
Author: Hauke Mehrtens <hauke at hauke-m.de>
AuthorDate: Sun Apr 2 10:29:55 2017 +0200

    kernel: update kernel 4.9 to 4.9.20
    
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 include/kernel-version.mk                          |  4 +-
 ...-a-mode-for-using-the-closed-firmware-for.patch |  2 +-
 ...-termination-of-the-initial-scan-for-bran.patch | 68 -------------------
 ...-support-for-rendering-with-ETC1-textures.patch |  4 +-
 ...-runtime-autosuspend-to-avoid-thrashing-V.patch | 78 ----------------------
 ...tach-mtd-device-named-ubi-or-data-on-boot.patch |  6 +-
 .../patches-4.9/901-debloat_sock_diag.patch        |  2 +-
 .../generic/patches-4.9/902-debloat_proc.patch     |  2 +-
 .../patches-4.9/0063-1-ipq806x-tsens-driver.patch  | 15 +----
 ...3-2-tsens-support-configurable-interrupts.patch | 54 ++++++---------
 ...om-use-scm_call-to-route-GPIO-irq-to-Apps.patch |  6 +-
 .../0004-MIPS-ralink-add-MT7621-pcie-driver.patch  | 10 +--
 12 files changed, 38 insertions(+), 213 deletions(-)

diff --git a/include/kernel-version.mk b/include/kernel-version.mk
index 587c25e..61cc5fa 100644
--- a/include/kernel-version.mk
+++ b/include/kernel-version.mk
@@ -4,11 +4,11 @@ LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .43
 LINUX_VERSION-4.4 = .56
-LINUX_VERSION-4.9 = .17
+LINUX_VERSION-4.9 = .20
 
 LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c
 LINUX_KERNEL_HASH-4.4.56 = 55181e24869e4b550ef756eecd1ab4f6774228c457f4830e9e779c6db4c2a2b6
-LINUX_KERNEL_HASH-4.9.17 = 9095c16550ebae9cbe0979a706116d95fbd8d270c1068857c4a8788de0f9ac7f
+LINUX_KERNEL_HASH-4.9.20 = 48660806dd32fb8dcbcf5932291bf6cc7d29240070372230871e0f56fea81341
 
 ifdef KERNEL_PATCHVER
   LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))
diff --git a/target/linux/brcm2708/patches-4.9/950-0105-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch b/target/linux/brcm2708/patches-4.9/950-0105-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch
index 789f001..f95d5aa 100644
--- a/target/linux/brcm2708/patches-4.9/950-0105-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0105-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch
@@ -62,7 +62,7 @@ Signed-off-by: Eric Anholt <eric at anholt.net>
  
 --- a/drivers/gpu/drm/vc4/vc4_drv.c
 +++ b/drivers/gpu/drm/vc4/vc4_drv.c
-@@ -292,6 +292,7 @@ static struct platform_driver *const com
+@@ -295,6 +295,7 @@ static struct platform_driver *const com
  	&vc4_dpi_driver,
  	&vc4_hvs_driver,
  	&vc4_crtc_driver,
diff --git a/target/linux/brcm2708/patches-4.9/950-0162-drm-vc4-Fix-termination-of-the-initial-scan-for-bran.patch b/target/linux/brcm2708/patches-4.9/950-0162-drm-vc4-Fix-termination-of-the-initial-scan-for-bran.patch
deleted file mode 100644
index 3326dca..0000000
--- a/target/linux/brcm2708/patches-4.9/950-0162-drm-vc4-Fix-termination-of-the-initial-scan-for-bran.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 57b0774967d7ea8d4173f82387100a84e4ba05d8 Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric at anholt.net>
-Date: Thu, 20 Oct 2016 16:48:12 -0700
-Subject: [PATCH] drm/vc4: Fix termination of the initial scan for branch
- targets.
-
-The loop is scanning until the original max_ip (size of the BO), but
-we want to not examine any code after the PROG_END's delay slots.
-There was a block trying to do that, except that we had some early
-continue statements if the signal wasn't a PROG_END or a BRANCH.
-
-The failure mode would be that a valid shader is rejected because some
-undefined memory after the PROG_END slots is parsed as a branch and
-the rest of its setup is illegal.  I haven't seen this in the wild,
-but valgrind was complaining when about this up in the userland
-simulator mode.
-
-Signed-off-by: Eric Anholt <eric at anholt.net>
-(cherry picked from commit 457e67a728696c4f8e6423c64e93def50530db9a)
----
- drivers/gpu/drm/vc4/vc4_validate_shaders.c | 19 ++++++++-----------
- 1 file changed, 8 insertions(+), 11 deletions(-)
-
---- a/drivers/gpu/drm/vc4/vc4_validate_shaders.c
-+++ b/drivers/gpu/drm/vc4/vc4_validate_shaders.c
-@@ -608,9 +608,7 @@ static bool
- vc4_validate_branches(struct vc4_shader_validation_state *validation_state)
- {
- 	uint32_t max_branch_target = 0;
--	bool found_shader_end = false;
- 	int ip;
--	int shader_end_ip = 0;
- 	int last_branch = -2;
- 
- 	for (ip = 0; ip < validation_state->max_ip; ip++) {
-@@ -621,8 +619,13 @@ vc4_validate_branches(struct vc4_shader_
- 		uint32_t branch_target_ip;
- 
- 		if (sig == QPU_SIG_PROG_END) {
--			shader_end_ip = ip;
--			found_shader_end = true;
-+			/* There are two delay slots after program end is
-+			 * signaled that are still executed, then we're
-+			 * finished.  validation_state->max_ip is the
-+			 * instruction after the last valid instruction in the
-+			 * program.
-+			 */
-+			validation_state->max_ip = ip + 3;
- 			continue;
- 		}
- 
-@@ -676,15 +679,9 @@ vc4_validate_branches(struct vc4_shader_
- 		}
- 		set_bit(after_delay_ip, validation_state->branch_targets);
- 		max_branch_target = max(max_branch_target, after_delay_ip);
--
--		/* There are two delay slots after program end is signaled
--		 * that are still executed, then we're finished.
--		 */
--		if (found_shader_end && ip == shader_end_ip + 2)
--			break;
- 	}
- 
--	if (max_branch_target > shader_end_ip) {
-+	if (max_branch_target > validation_state->max_ip - 3) {
- 		DRM_ERROR("Branch landed after QPU_SIG_PROG_END");
- 		return false;
- 	}
diff --git a/target/linux/brcm2708/patches-4.9/950-0163-drm-vc4-Add-support-for-rendering-with-ETC1-textures.patch b/target/linux/brcm2708/patches-4.9/950-0163-drm-vc4-Add-support-for-rendering-with-ETC1-textures.patch
index 2b81578..bb472b3 100644
--- a/target/linux/brcm2708/patches-4.9/950-0163-drm-vc4-Add-support-for-rendering-with-ETC1-textures.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0163-drm-vc4-Add-support-for-rendering-with-ETC1-textures.patch
@@ -19,8 +19,8 @@ Signed-off-by: Eric Anholt <eric at anholt.net>
 
 --- a/drivers/gpu/drm/vc4/vc4_drv.c
 +++ b/drivers/gpu/drm/vc4/vc4_drv.c
-@@ -78,6 +78,7 @@ static int vc4_get_param_ioctl(struct dr
- 		pm_runtime_put(&vc4->v3d->pdev->dev);
+@@ -81,6 +81,7 @@ static int vc4_get_param_ioctl(struct dr
+ 		pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev);
  		break;
  	case DRM_VC4_PARAM_SUPPORTS_BRANCHES:
 +	case DRM_VC4_PARAM_SUPPORTS_ETC1:
diff --git a/target/linux/brcm2708/patches-4.9/950-0164-drm-vc4-Use-runtime-autosuspend-to-avoid-thrashing-V.patch b/target/linux/brcm2708/patches-4.9/950-0164-drm-vc4-Use-runtime-autosuspend-to-avoid-thrashing-V.patch
deleted file mode 100644
index f6d738d..0000000
--- a/target/linux/brcm2708/patches-4.9/950-0164-drm-vc4-Use-runtime-autosuspend-to-avoid-thrashing-V.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 936dc8b00ccd5072c5d610b97199402275bfdf26 Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric at anholt.net>
-Date: Fri, 4 Nov 2016 15:58:38 -0700
-Subject: [PATCH] drm/vc4: Use runtime autosuspend to avoid thrashing V3D power
- state.
-
-The pm_runtime_put() we were using immediately released power on the
-device, which meant that we were generally turning the device off and
-on once per frame.  In many profiles I've looked at, that added up to
-about 1% of CPU time, but this could get worse in the case of frequent
-rendering and readback (as may happen in X rendering).  By keeping the
-device on until we've been idle for a couple of frames, we drop the
-overhead of runtime PM down to sub-.1%.
-
-Signed-off-by: Eric Anholt <eric at anholt.net>
-(cherry picked from commit 3a62234680d86efa0239665ed8a0e908f1aef147)
----
- drivers/gpu/drm/vc4/vc4_drv.c | 9 ++++++---
- drivers/gpu/drm/vc4/vc4_gem.c | 6 ++++--
- drivers/gpu/drm/vc4/vc4_v3d.c | 2 ++
- 3 files changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/gpu/drm/vc4/vc4_drv.c
-+++ b/drivers/gpu/drm/vc4/vc4_drv.c
-@@ -61,21 +61,24 @@ static int vc4_get_param_ioctl(struct dr
- 		if (ret < 0)
- 			return ret;
- 		args->value = V3D_READ(V3D_IDENT0);
--		pm_runtime_put(&vc4->v3d->pdev->dev);
-+		pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev);
-+		pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev);
- 		break;
- 	case DRM_VC4_PARAM_V3D_IDENT1:
- 		ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev);
- 		if (ret < 0)
- 			return ret;
- 		args->value = V3D_READ(V3D_IDENT1);
--		pm_runtime_put(&vc4->v3d->pdev->dev);
-+		pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev);
-+		pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev);
- 		break;
- 	case DRM_VC4_PARAM_V3D_IDENT2:
- 		ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev);
- 		if (ret < 0)
- 			return ret;
- 		args->value = V3D_READ(V3D_IDENT2);
--		pm_runtime_put(&vc4->v3d->pdev->dev);
-+		pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev);
-+		pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev);
- 		break;
- 	case DRM_VC4_PARAM_SUPPORTS_BRANCHES:
- 	case DRM_VC4_PARAM_SUPPORTS_ETC1:
---- a/drivers/gpu/drm/vc4/vc4_gem.c
-+++ b/drivers/gpu/drm/vc4/vc4_gem.c
-@@ -711,8 +711,10 @@ vc4_complete_exec(struct drm_device *dev
- 	}
- 
- 	mutex_lock(&vc4->power_lock);
--	if (--vc4->power_refcount == 0)
--		pm_runtime_put(&vc4->v3d->pdev->dev);
-+	if (--vc4->power_refcount == 0) {
-+		pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev);
-+		pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev);
-+	}
- 	mutex_unlock(&vc4->power_lock);
- 
- 	kfree(exec);
---- a/drivers/gpu/drm/vc4/vc4_v3d.c
-+++ b/drivers/gpu/drm/vc4/vc4_v3d.c
-@@ -222,6 +222,8 @@ static int vc4_v3d_bind(struct device *d
- 		return ret;
- 	}
- 
-+	pm_runtime_use_autosuspend(dev);
-+	pm_runtime_set_autosuspend_delay(dev, 40); /* a little over 2 frames. */
- 	pm_runtime_enable(dev);
- 
- 	return 0;
diff --git a/target/linux/generic/patches-4.9/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/patches-4.9/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
index 52a208a..e4f9237 100644
--- a/target/linux/generic/patches-4.9/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
+++ b/target/linux/generic/patches-4.9/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
@@ -9,10 +9,8 @@ Signed-off-by: Daniel Golle <daniel at makrotopia.org>
  drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
  1 file changed, 36 insertions(+)
 
-Index: linux-4.9.17/drivers/mtd/ubi/build.c
-===================================================================
---- linux-4.9.17.orig/drivers/mtd/ubi/build.c
-+++ linux-4.9.17/drivers/mtd/ubi/build.c
+--- a/drivers/mtd/ubi/build.c
++++ b/drivers/mtd/ubi/build.c
 @@ -1212,6 +1212,49 @@ static struct mtd_info * __init open_mtd
  	return mtd;
  }
diff --git a/target/linux/generic/patches-4.9/901-debloat_sock_diag.patch b/target/linux/generic/patches-4.9/901-debloat_sock_diag.patch
index dec8d2e..237bcea 100644
--- a/target/linux/generic/patches-4.9/901-debloat_sock_diag.patch
+++ b/target/linux/generic/patches-4.9/901-debloat_sock_diag.patch
@@ -25,7 +25,7 @@
  obj-$(CONFIG_PROC_FS) += net-procfs.o
 --- a/net/core/sock.c
 +++ b/net/core/sock.c
-@@ -1455,9 +1455,11 @@ void sk_destruct(struct sock *sk)
+@@ -1460,9 +1460,11 @@ void sk_destruct(struct sock *sk)
  
  static void __sk_free(struct sock *sk)
  {
diff --git a/target/linux/generic/patches-4.9/902-debloat_proc.patch b/target/linux/generic/patches-4.9/902-debloat_proc.patch
index aa85c6b..37ce4c2 100644
--- a/target/linux/generic/patches-4.9/902-debloat_proc.patch
+++ b/target/linux/generic/patches-4.9/902-debloat_proc.patch
@@ -173,7 +173,7 @@
  		goto err;
 --- a/net/core/sock.c
 +++ b/net/core/sock.c
-@@ -3083,6 +3083,8 @@ static __net_initdata struct pernet_oper
+@@ -3089,6 +3089,8 @@ static __net_initdata struct pernet_oper
  
  static int __init proto_init(void)
  {
diff --git a/target/linux/ipq806x/patches-4.9/0063-1-ipq806x-tsens-driver.patch b/target/linux/ipq806x/patches-4.9/0063-1-ipq806x-tsens-driver.patch
index 691f32c..685b0c3 100644
--- a/target/linux/ipq806x/patches-4.9/0063-1-ipq806x-tsens-driver.patch
+++ b/target/linux/ipq806x/patches-4.9/0063-1-ipq806x-tsens-driver.patch
@@ -32,8 +32,6 @@ Signed-off-by: Rajith Cherian <rajith at codeaurora.org>
  5 files changed, 558 insertions(+), 2 deletions(-)
  create mode 100644 drivers/thermal/qcom/tsens-ipq8064.c
 
-diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
-index 292ed89..f4a76f6 100644
 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
 +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
 @@ -5,6 +5,7 @@ Required properties:
@@ -44,8 +42,6 @@ index 292ed89..f4a76f6 100644
  
  - reg: Address range of the thermal registers
  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
-diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
-index 2cc2193..cc07cf4 100644
 --- a/drivers/thermal/qcom/Makefile
 +++ b/drivers/thermal/qcom/Makefile
 @@ -1,2 +1,3 @@
@@ -53,9 +49,6 @@ index 2cc2193..cc07cf4 100644
 -qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
 +qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o \
 +				tsens-ipq8064.o
-diff --git a/drivers/thermal/qcom/tsens-ipq8064.c b/drivers/thermal/qcom/tsens-ipq8064.c
-new file mode 100644
-index 0000000..c52888f
 --- /dev/null
 +++ b/drivers/thermal/qcom/tsens-ipq8064.c
 @@ -0,0 +1,551 @@
@@ -610,11 +603,9 @@ index 0000000..c52888f
 +	.num_sensors	= 11,
 +	.ops		= &ops_ipq8064,
 +};
-diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
-index 3f9fe6a..2d25593 100644
 --- a/drivers/thermal/qcom/tsens.c
 +++ b/drivers/thermal/qcom/tsens.c
-@@ -72,6 +72,9 @@ static const struct of_device_id tsens_table[] = {
+@@ -72,6 +72,9 @@ static const struct of_device_id tsens_t
  	}, {
  		.compatible = "qcom,msm8996-tsens",
  		.data = &data_8996,
@@ -624,11 +615,9 @@ index 3f9fe6a..2d25593 100644
  	},
  	{}
  };
-diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
-index 911c197..31279a2 100644
 --- a/drivers/thermal/qcom/tsens.h
 +++ b/drivers/thermal/qcom/tsens.h
-@@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
+@@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsen
  int init_common(struct tsens_device *);
  int get_temp_common(struct tsens_device *, int, int *);
  
diff --git a/target/linux/ipq806x/patches-4.9/0063-2-tsens-support-configurable-interrupts.patch b/target/linux/ipq806x/patches-4.9/0063-2-tsens-support-configurable-interrupts.patch
index de9a8f8..ca98970 100644
--- a/target/linux/ipq806x/patches-4.9/0063-2-tsens-support-configurable-interrupts.patch
+++ b/target/linux/ipq806x/patches-4.9/0063-2-tsens-support-configurable-interrupts.patch
@@ -21,8 +21,6 @@ Signed-off-by: Rajith Cherian <rajith at codeaurora.org>
  include/linux/thermal.h                            | 14 +++++
  6 files changed, 162 insertions(+), 17 deletions(-)
 
-diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
-index f4a76f6..7c0a6a7 100644
 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
 +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
 @@ -12,11 +12,15 @@ Required properties:
@@ -41,11 +39,9 @@ index f4a76f6..7c0a6a7 100644
 +		interrupts = <0 178 0>;
  		#thermal-sensor-cells = <1>;
  	};
-diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
-index d04ec3b..d83697e 100644
 --- a/drivers/thermal/of-thermal.c
 +++ b/drivers/thermal/of-thermal.c
-@@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct thermal_zone_device *tz,
+@@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct th
  {
  	struct __thermal_zone *data = tz->devdata;
  
@@ -54,7 +50,7 @@ index d04ec3b..d83697e 100644
  		return -EINVAL;
  
  	return data->ops->get_temp(data->sensor_data, temp);
-@@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct thermal_zone_device *tz,
+@@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct t
  {
  	struct __thermal_zone *data = tz->devdata;
  
@@ -64,7 +60,7 @@ index d04ec3b..d83697e 100644
  		return -EINVAL;
  
  	return data->ops->set_trips(data->sensor_data, low, high);
-@@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(struct thermal_zone_device *tz,
+@@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(stru
  {
  	struct __thermal_zone *data = tz->devdata;
  
@@ -74,7 +70,7 @@ index d04ec3b..d83697e 100644
  	return data->ops->set_emul_temp(data->sensor_data, temp);
  }
  
-@@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip,
+@@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct t
  {
  	struct __thermal_zone *data = tz->devdata;
  
@@ -83,7 +79,7 @@ index d04ec3b..d83697e 100644
  		return -EINVAL;
  
  	return data->ops->get_trend(data->sensor_data, trip, trend);
-@@ -286,7 +290,9 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
+@@ -286,7 +290,9 @@ static int of_thermal_set_mode(struct th
  	mutex_unlock(&tz->lock);
  
  	data->mode = mode;
@@ -94,7 +90,7 @@ index d04ec3b..d83697e 100644
  
  	return 0;
  }
-@@ -296,7 +302,8 @@ static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
+@@ -296,7 +302,8 @@ static int of_thermal_get_trip_type(stru
  {
  	struct __thermal_zone *data = tz->devdata;
  
@@ -104,7 +100,7 @@ index d04ec3b..d83697e 100644
  		return -EDOM;
  
  	*type = data->trips[trip].type;
-@@ -304,12 +311,39 @@ static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
+@@ -304,12 +311,39 @@ static int of_thermal_get_trip_type(stru
  	return 0;
  }
  
@@ -145,7 +141,7 @@ index d04ec3b..d83697e 100644
  		return -EDOM;
  
  	*temp = data->trips[trip].temperature;
-@@ -322,7 +356,8 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
+@@ -322,7 +356,8 @@ static int of_thermal_set_trip_temp(stru
  {
  	struct __thermal_zone *data = tz->devdata;
  
@@ -155,7 +151,7 @@ index d04ec3b..d83697e 100644
  		return -EDOM;
  
  	if (data->ops->set_trip_temp) {
-@@ -344,7 +379,8 @@ static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip,
+@@ -344,7 +379,8 @@ static int of_thermal_get_trip_hyst(stru
  {
  	struct __thermal_zone *data = tz->devdata;
  
@@ -165,7 +161,7 @@ index d04ec3b..d83697e 100644
  		return -EDOM;
  
  	*hyst = data->trips[trip].hysteresis;
-@@ -357,7 +393,8 @@ static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
+@@ -357,7 +393,8 @@ static int of_thermal_set_trip_hyst(stru
  {
  	struct __thermal_zone *data = tz->devdata;
  
@@ -175,7 +171,7 @@ index d04ec3b..d83697e 100644
  		return -EDOM;
  
  	/* thermal framework should take care of data->mask & (1 << trip) */
-@@ -432,6 +469,9 @@ thermal_zone_of_add_sensor(struct device_node *zone,
+@@ -432,6 +469,9 @@ thermal_zone_of_add_sensor(struct device
  	if (ops->set_emul_temp)
  		tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
  
@@ -185,7 +181,7 @@ index d04ec3b..d83697e 100644
  	mutex_unlock(&tzd->lock);
  
  	return tzd;
-@@ -726,7 +766,10 @@ static const char * const trip_types[] = {
+@@ -726,7 +766,10 @@ static const char * const trip_types[] =
  	[THERMAL_TRIP_ACTIVE]	= "active",
  	[THERMAL_TRIP_PASSIVE]	= "passive",
  	[THERMAL_TRIP_HOT]	= "hot",
@@ -197,11 +193,9 @@ index d04ec3b..d83697e 100644
  };
  
  /**
-diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
-index 2d25593..ac68af3 100644
 --- a/drivers/thermal/qcom/tsens.c
 +++ b/drivers/thermal/qcom/tsens.c
-@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, int *temp)
+@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, in
  
  static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
  {
@@ -210,7 +204,7 @@ index 2d25593..ac68af3 100644
  	struct tsens_device *tmdev = s->tmdev;
  
  	if (tmdev->ops->get_trend)
-@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
+@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int
  	return -ENOTSUPP;
  }
  
@@ -223,7 +217,7 @@ index 2d25593..ac68af3 100644
  
  	if (tmdev->ops && tmdev->ops->suspend)
  		return tmdev->ops->suspend(tmdev);
-@@ -50,9 +51,10 @@ static int  __maybe_unused tsens_suspend(struct device *dev)
+@@ -50,9 +51,10 @@ static int  __maybe_unused tsens_suspend
  	return 0;
  }
  
@@ -236,7 +230,7 @@ index 2d25593..ac68af3 100644
  
  	if (tmdev->ops && tmdev->ops->resume)
  		return tmdev->ops->resume(tmdev);
-@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(struct device *dev)
+@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(s
  	return 0;
  }
  
@@ -276,7 +270,7 @@ index 2d25593..ac68af3 100644
  };
  
  static int tsens_register(struct tsens_device *tmdev)
-@@ -131,7 +159,7 @@ static int tsens_probe(struct platform_device *pdev)
+@@ -131,7 +159,7 @@ static int tsens_probe(struct platform_d
  	if (id)
  		data = id->data;
  	else
@@ -285,7 +279,7 @@ index 2d25593..ac68af3 100644
  
  	if (data->num_sensors <= 0) {
  		dev_err(dev, "invalid number of sensors\n");
-@@ -146,6 +174,9 @@ static int tsens_probe(struct platform_device *pdev)
+@@ -146,6 +174,9 @@ static int tsens_probe(struct platform_d
  	tmdev->dev = dev;
  	tmdev->num_sensors = data->num_sensors;
  	tmdev->ops = data->ops;
@@ -295,8 +289,6 @@ index 2d25593..ac68af3 100644
  	for (i = 0;  i < tmdev->num_sensors; i++) {
  		if (data->hw_ids)
  			tmdev->sensor[i].hw_id = data->hw_ids[i];
-diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
-index 31279a2..54bbdc0 100644
 --- a/drivers/thermal/qcom/tsens.h
 +++ b/drivers/thermal/qcom/tsens.h
 @@ -24,9 +24,12 @@ struct tsens_device;
@@ -346,11 +338,9 @@ index 31279a2..54bbdc0 100644
  	struct tsens_sensor		sensor[0];
  };
  
-diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
-index 226b0b4..20bd624 100644
 --- a/drivers/thermal/thermal_core.c
 +++ b/drivers/thermal/thermal_core.c
-@@ -732,12 +732,48 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr,
+@@ -732,12 +732,48 @@ trip_point_type_show(struct device *dev,
  		return sprintf(buf, "passive\n");
  	case THERMAL_TRIP_ACTIVE:
  		return sprintf(buf, "active\n");
@@ -399,7 +389,7 @@ index 226b0b4..20bd624 100644
  trip_point_temp_store(struct device *dev, struct device_attribute *attr,
  		     const char *buf, size_t count)
  {
-@@ -1321,7 +1357,7 @@ thermal_cooling_device_weight_store(struct device *dev,
+@@ -1321,7 +1357,7 @@ thermal_cooling_device_weight_store(stru
   */
  int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
  				     int trip,
@@ -408,7 +398,7 @@ index 226b0b4..20bd624 100644
  				     unsigned long upper, unsigned long lower,
  				     unsigned int weight)
  {
-@@ -1772,6 +1808,12 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
+@@ -1772,6 +1808,12 @@ static int create_trip_attrs(struct ther
  		tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
  		tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
  
@@ -421,8 +411,6 @@ index 226b0b4..20bd624 100644
  		device_create_file(&tz->device,
  				   &tz->trip_type_attrs[indx].attr);
  
-diff --git a/include/linux/thermal.h b/include/linux/thermal.h
-index 511182a..510a087 100644
 --- a/include/linux/thermal.h
 +++ b/include/linux/thermal.h
 @@ -77,11 +77,19 @@ enum thermal_device_mode {
diff --git a/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch b/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
index 2eac44d..40656d1 100644
--- a/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
+++ b/target/linux/ipq806x/patches-4.9/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
@@ -105,7 +105,7 @@ Signed-off-by: Ajay Kishore <akisho at codeaurora.org>
  #include "../core.h"
  #include "../pinconf.h"
  #include "pinctrl-msm.h"
-@@ -639,6 +640,9 @@ static int msm_gpio_irq_set_type(struct
+@@ -635,6 +636,9 @@ static int msm_gpio_irq_set_type(struct
  	const struct msm_pingroup *g;
  	unsigned long flags;
  	u32 val;
@@ -115,7 +115,7 @@ Signed-off-by: Ajay Kishore <akisho at codeaurora.org>
  
  	g = &pctrl->soc->groups[d->hwirq];
  
-@@ -652,11 +656,30 @@ static int msm_gpio_irq_set_type(struct
+@@ -648,11 +652,30 @@ static int msm_gpio_irq_set_type(struct
  	else
  		clear_bit(d->hwirq, pctrl->dual_edge_irqs);
  
@@ -150,7 +150,7 @@ Signed-off-by: Ajay Kishore <akisho at codeaurora.org>
  
  	/* Update configuration for gpio.
  	 * RAW_STATUS_EN is left on for all gpio irqs. Due to the
-@@ -930,4 +953,3 @@ int msm_pinctrl_remove(struct platform_d
+@@ -926,4 +949,3 @@ int msm_pinctrl_remove(struct platform_d
  	return 0;
  }
  EXPORT_SYMBOL(msm_pinctrl_remove);
diff --git a/target/linux/ramips/patches-4.9/0004-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-4.9/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
index 9bc3a3e..da5239a 100644
--- a/target/linux/ramips/patches-4.9/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
+++ b/target/linux/ramips/patches-4.9/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
@@ -10,10 +10,8 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
  2 files changed, 814 insertions(+)
  create mode 100644 arch/mips/pci/pci-mt7621.c
 
-Index: linux-4.9.14/arch/mips/pci/Makefile
-===================================================================
---- linux-4.9.14.orig/arch/mips/pci/Makefile
-+++ linux-4.9.14/arch/mips/pci/Makefile
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
 @@ -46,6 +46,7 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops
  obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
  obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
@@ -22,10 +20,8 @@ Index: linux-4.9.14/arch/mips/pci/Makefile
  obj-$(CONFIG_SOC_RT288X)	+= pci-rt2880.o
  obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
  obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
-Index: linux-4.9.14/arch/mips/pci/pci-mt7621.c
-===================================================================
 --- /dev/null
-+++ linux-4.9.14/arch/mips/pci/pci-mt7621.c
++++ b/arch/mips/pci/pci-mt7621.c
 @@ -0,0 +1,836 @@
 +/**************************************************************************
 + *



More information about the lede-commits mailing list