[source] ipq8064: Fix dwc3 module unloading

[LEDE Commits]

blogic pushed a commit to source.git, branch master:
https://git.lede-project.org/8db079a9ff1756059250b801617a20baba214684

commit 8db079a9ff1756059250b801617a20baba214684
Author: Thomas Reifferscheid <thomas at reifferscheid.org>
AuthorDate: Fri Apr 7 12:25:10 2017 +0200

    ipq8064: Fix dwc3 module unloading
    
    The patch follows the qualcomm code comments setting
    SSUSB_CTRL_TEST_POWERDOWN to 0x1 and is testing and clearing the
    bit during USB superspeed PHY init. According to Andy Gross it
    needs to be BIT(26).
    
    Signed-off-by: Thomas Reifferscheid <thomas at reifferscheid.org>
    Acked-by: Andy Gross <andy.gross at linaro.org>
---
 .../ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch   | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch
index 39e918f..261836e 100644
--- a/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch
+++ b/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch
@@ -39,7 +39,7 @@ Signed-off-by: Andy Gross <agross at codeaurora.org>
 +obj-$(CONFIG_PHY_QCOM_DWC3)		+= phy-qcom-dwc3.o
 --- /dev/null
 +++ b/drivers/phy/phy-qcom-dwc3.c
-@@ -0,0 +1,484 @@
+@@ -0,0 +1,492 @@
 +/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved.
 + *
 + * This program is free software; you can redistribute it and/or modify
@@ -99,7 +99,7 @@ Signed-off-by: Andy Gross <agross at codeaurora.org>
 +
 +/* PHY_CTRL_REG */
 +#define SSUSB_CTRL_REF_USE_PAD		BIT(28)
-+#define SSUSB_CTRL_TEST_POWERDOWN	BIT(27)
++#define SSUSB_CTRL_TEST_POWERDOWN	BIT(26)
 +#define SSUSB_CTRL_LANE0_PWR_PRESENT	BIT(24)
 +#define SSUSB_CTRL_SS_PHY_EN		BIT(8)
 +#define SSUSB_CTRL_SS_PHY_RESET		BIT(7)
@@ -331,6 +331,14 @@ Signed-off-by: Andy Gross <agross at codeaurora.org>
 +
 +	/* reset phy */
 +	data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++
++       /* Test and clear SSUSB_CTRL_TEST_POWERDOWN */
++       if (data & SSUSB_CTRL_TEST_POWERDOWN) {
++               qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
++                               SSUSB_CTRL_TEST_POWERDOWN, 0x0);
++               data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
++       }
++
 +	writel(data | SSUSB_CTRL_SS_PHY_RESET,
 +		phy_dwc3->base + SSUSB_PHY_CTRL_REG);
 +	usleep_range(2000, 2200);
@@ -420,7 +428,7 @@ Signed-off-by: Andy Gross <agross at codeaurora.org>
 +	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
 +		SSUSB_CTRL_REF_USE_PAD, 0x0);
 +	qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+		SSUSB_CTRL_TEST_POWERDOWN, 0x0);
++		SSUSB_CTRL_TEST_POWERDOWN, SSUSB_CTRL_TEST_POWERDOWN);
 +
 +	return 0;
 +}