[source] ramips: fix ZyXEL Keenetic Omni/Omni II GPIOs

[LEDE Commits]

mkresin pushed a commit to source.git, branch master:
https://git.lede-project.org/187624f759f6ee3ede1697d9cfbc648a92a18ef1

commit 187624f759f6ee3ede1697d9cfbc648a92a18ef1
Author: Alexey Belyaev <spider at spider.vc>
AuthorDate: Sun Apr 23 02:46:23 2017 +0600

    ramips: fix ZyXEL Keenetic Omni/Omni II GPIOs
    
    Each GPIO bank has only 24 gpios. Use and enable the correct banks for
    GPIOs > 24.
    
    Signed-off-by: Alexey Belyaev <spider at spider.vc>
---
 target/linux/ramips/dts/kn_rc.dts | 14 +++++++++++---
 target/linux/ramips/dts/kn_rf.dts | 14 +++++++++++---
 2 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/target/linux/ramips/dts/kn_rc.dts b/target/linux/ramips/dts/kn_rc.dts
index 3c9dfb4..d275902 100644
--- a/target/linux/ramips/dts/kn_rc.dts
+++ b/target/linux/ramips/dts/kn_rc.dts
@@ -13,17 +13,17 @@
 
 		wan {
 			label = "kn_rc:green:wan";
-			gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 
 		usb {
 			label = "kn_rc:green:usb";
-			gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 
 		wifi {
 			label = "kn_rc:green:wifi";
-			gpios = <&gpio0 72 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 		};
 
 		power {
@@ -69,6 +69,14 @@
 	};
 };
 
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
 &spi0 {
 	status = "okay";
 
diff --git a/target/linux/ramips/dts/kn_rf.dts b/target/linux/ramips/dts/kn_rf.dts
index 4f2b710..a65fda1 100644
--- a/target/linux/ramips/dts/kn_rf.dts
+++ b/target/linux/ramips/dts/kn_rf.dts
@@ -13,7 +13,7 @@
 
 		wan {
 			label = "kn_rc:green:wan";
-			gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 
 		usb {
@@ -23,12 +23,12 @@
 
 		wifi {
 			label = "kn_rc:green:wifi";
-			gpios = <&gpio0 72 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 		};
 
 		power {
 			label = "kn_rc:green:power";
-			gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -69,6 +69,14 @@
 	};
 };
 
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
 &spi0 {
 	status = "okay";