April 2015 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Apr 1 08:14:07 PDT 2015
Ending: Thu Apr 30 20:01:55 PDT 2015
Messages: 189

• BCM2836 (Raspberry Pi 2) port   Eric Anholt
• [PATCH 1/9] dt-bindings: Add root properties for Raspberry Pi 2.   Eric Anholt
• [PATCH 2/9] ARM: BCM2835: Split peripheral definitions off to a common include.   Eric Anholt
• [PATCH 3/9] ARM: Make a copy of the 2835 dts for the 2836.   Eric Anholt
• [PATCH 4/9] ARM: Update the device trees for 2836.   Eric Anholt
• [PATCH 5/9] ARM: BCM2836: Add io map initialization for bcm2836.   Eric Anholt
• [PATCH 6/9] ARM: Make a Kconfig option for shared BCM2835/BCM2836 code.   Eric Anholt
• [PATCH 7/9] ARM: Add Kconfig support for bcm2836.   Eric Anholt
• [PATCH 8/9] ARM: Add MAINTAINERS for 2836.   Eric Anholt
• [PATCH 9/9] ARM: BCM283x: Register fixed clocks for uart in the DT.   Eric Anholt
• [PATCH 5/9] ARM: BCM2836: Add io map initialization for bcm2836.   Eric Anholt
• [PATCH 7/9] ARM: Add Kconfig support for bcm2836.   Eric Anholt
• [PATCH 5/9] ARM: BCM2836: Add io map initialization for bcm2836.   Eric Anholt
• [PATCH] ARM: BCM2835: Skip doing our own iotable_init() initialization.   Eric Anholt
• [PATCH 8/9] ARM: Add MAINTAINERS for 2836.   Eric Anholt
• [PATCH 9/9] ARM: BCM283x: Register fixed clocks for uart in the DT.   Eric Anholt
• BCM2836 (Raspberry Pi 2) port   Eric Anholt
• [PATCH 1/2] ARM: BCM2835: Drop the init_irq() hook.   Eric Anholt
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Eric Anholt
• BCM2836 (Raspberry Pi 2) port   Eric Anholt
• [PATCH 0/3] BCM2835 core mailbox support   Eric Anholt
• [PATCH 1/3 v4] dt/bindings: Add binding for the BCM2835 mailbox driver   Eric Anholt
• [PATCH 2/3 v5] mailbox: Enable BCM2835 mailbox support   Eric Anholt
• [PATCH 3/3] ARM: bcm2835: Add the mailbox to the device tree   Eric Anholt
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Eric Anholt
• [PATCH 0/3] Raspberry Pi firmware driver   Eric Anholt
• [PATCH 1/3] dt/bindings: Add binding for the Raspberry Pi firmware driver   Eric Anholt
• [PATCH 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Eric Anholt
• [PATCH 3/3] ARM: bcm2835: Add the necessary firmware driver information to the DT   Eric Anholt
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Eric Anholt
• [PATCH 2/3 v5] mailbox: Enable BCM2835 mailbox support   Eric Anholt
• [PATCH 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Eric Anholt
• [PATCH 1/3 v5] dt/bindings: Add binding for the BCM2835 mailbox driver   Eric Anholt
• [PATCH 2/3 v6] mailbox: Enable BCM2835 mailbox support   Eric Anholt
• [PATCH 3/3] ARM: bcm2835: Add the necessary firmware driver information to the DT   Eric Anholt
• [PATCH 1/3 v5] dt/bindings: Add binding for the BCM2835 mailbox driver   Eric Anholt
• [PATCH 2/3 v5] mailbox: Enable BCM2835 mailbox support   Eric Anholt
• [PATCH 2/3 v7] mailbox: Enable BCM2835 mailbox support   Eric Anholt
• [PATCH 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Eric Anholt
• [PATCH 5/9] ARM: BCM2836: Add io map initialization for bcm2836.   Arnd Bergmann
• [PATCH 7/9] ARM: Add Kconfig support for bcm2836.   Arnd Bergmann
• [PATCH 5/9] ARM: BCM2836: Add io map initialization for bcm2836.   Arnd Bergmann
• [PATCH 5/9] ARM: BCM2836: Add io map initialization for bcm2836.   Arnd Bergmann
• [PATCH 5/9] ARM: BCM2836: Add io map initialization for bcm2836.   Arnd Bergmann
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Arnd Bergmann
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Arnd Bergmann
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Arnd Bergmann
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Arnd Bergmann
• [PATCH 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Arnd Bergmann
• [PATCH 1/3 v4] dt/bindings: Add binding for the BCM2835 mailbox driver   Jassi Brar
• [PATCH 2/3 v5] mailbox: Enable BCM2835 mailbox support   Jassi Brar
• [PATCH 2/3 v5] mailbox: Enable BCM2835 mailbox support   Jassi Brar
• [PATCH 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Jassi Brar
• [PATCH 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Jassi Brar
• [PATCH 1/3 v5] dt/bindings: Add binding for the BCM2835 mailbox driver   Jassi Brar
• [PATCH 2/3 v7] mailbox: Enable BCM2835 mailbox support   Jassi Brar
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Mark Brown
• [PATCH] SPI: bcm2835: move to the transfer_one driver model   Mark Brown
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Mark Brown
• [PATCH] spi: setting up cs_gpio levels prior to registering spi devices   Mark Brown
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Mark Brown
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Mark Brown
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Mark Brown
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Mark Brown
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Mark Brown
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Mark Brown
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Mark Brown
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Mark Brown
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Mark Brown
• [PATCH] spi: bcm2835: change timeout of polling driver to 1s   Mark Brown
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Mark Brown
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Mark Brown
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Mark Brown
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Mark Brown
• [PATCH] spi: bcm2835: fallback to interrupt for polling timeouts exceeding 2 jiffies   Mark Brown
• spi: bcm2835: can_dma and scatter/gather question   Mark Brown
• randconfig build error with next-20150413, in drivers/spi/spi-bcm2835.c   Jim Davis
• BCM2836 (Raspberry Pi 2) port   Florian Fainelli
• [PATCH] Add DT support for PinBall board   Grégory Hermant
• [PATCH] ARM: BCM2835: Skip doing our own iotable_init() initialization.   Lee Jones
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Lee Jones
• [PATCH 1/2] ARM: BCM2835: Drop the init_irq() hook.   Lee Jones
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Lee Jones
• [PATCH 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Lee Jones
• [PATCH 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Lee Jones
• [PATCH 3/3] ARM: bcm2835: Add the necessary firmware driver information to the DT   Lee Jones
• [PATCH 1/3] dt/bindings: Add binding for the Raspberry Pi firmware driver   Lee Jones
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Lee Jones
• [PATCH] pinctrl: bcm2835: Fix support for threaded level triggered IRQs   Charles Keepax
• [PATCH 1/2] genirq: MSI: Constify irq_domain_ops   Krzysztof Kozlowski
• [PATCH 2/2] irqchip: Constify irq_domain_ops   Krzysztof Kozlowski
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Pranith Kumar
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Lubomir Rintel
• [PATCH 2/3 v5] mailbox: Enable BCM2835 mailbox support   Lubomir Rintel
• [PATCH] spi: bcm2835: Add GPIOLIB dependency   Guenter Roeck
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Guenter Roeck
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Guenter Roeck
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Guenter Roeck
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Guenter Roeck
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Guenter Roeck
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Guenter Roeck
• [2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Guenter Roeck
• [PATCH] SPI: bcm2835: move to the transfer_one driver model   Martin Sperl
• bcm2835_gpio_direction_output not setting up GPIO value   Martin Sperl
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Martin Sperl
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Martin Sperl
• [PATCH] spi: setting up cs_gpio levels prior to registering spi devices   Martin Sperl
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Martin Sperl
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Martin Sperl
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Martin Sperl
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Martin Sperl
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Martin Sperl
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Martin Sperl
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Martin Sperl
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Martin Sperl
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Martin Sperl
• [PATCH] spi: bcm2835: Add GPIOLIB dependency   Martin Sperl
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Martin Sperl
• [PATCH] dmaengine: bcm2835: Add slave dma support   Martin Sperl
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Martin Sperl
• [PATCH] dmaengine: bcm2835: Add slave dma support   Martin Sperl
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Martin Sperl
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Martin Sperl
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Martin Sperl
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   Martin Sperl
• bcm2835: dma: strangeness of of_dma_request_slave_channel   Martin Sperl
• bcm2835: dma: strangeness of of_dma_request_slave_channel   Martin Sperl
• spi: bcm2835: can_dma and scatter/gather question   Martin Sperl
• [PATCH 1/2] pinctrl: bcm2835: add pinctrl pre-processor define   Alexander Stein
• [PATCH 2/2] ARM: bcm2835: Use pinctrl defines   Alexander Stein
• [PATCH 1/2] pinctrl: bcm2835: add pinctrl pre-processor define   Alexander Stein
• [PATCH] dmaengine: bcm2835: Add slave dma support   Alexander Stein
• bcm2835_gpio_direction_output not setting up GPIO value   Noralf Trønnes
• [PATCH] dmaengine: bcm2835: Add slave dma support   Noralf Trønnes
• [PATCH] dmaengine: bcm2835: Add slave dma support   Noralf Trønnes
• [PATCH] dmaengine: bcm2835: Add slave dma support   Noralf Trønnes
• [PATCH] dmaengine: bcm2835: Add slave dma support   Noralf Trønnes
• [PATCH] dmaengine: bcm2835: Add slave dma support   Noralf Trønnes
• [PATCH] dmaengine: bcm2835: Add slave dma support   Noralf Trønnes
• [PATCH v2] dmaengine: bcm2835: Add slave dma support   Noralf Trønnes
• [PATCH 1/2] pinctrl: bcm2835: add pinctrl pre-processor define   Stefan Wahren
• [PATCH 1/2] pinctrl: bcm2835: add pinctrl pre-processor define   Stefan Wahren
• [PATCH] dmaengine: bcm2835: Add slave dma support   Stefan Wahren
• [PATCH] dmaengine: bcm2835: Add slave dma support   Stefan Wahren
• [PATCH] pinctrl: bcm2835: Fix support for threaded level triggered IRQs   Linus Walleij
• [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us   Stephen Warren
• [PATCH] SPI: bcm2835: move to the transfer_one driver model   Stephen Warren
• [PATCH] Add DT support for PinBall board   Stephen Warren
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Stephen Warren
• bcm2835_gpio_direction_output not setting up GPIO value   Stephen Warren
• bcm2835_gpio_direction_output not setting up GPIO value   Stephen Warren
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Stephen Warren
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Stephen Warren
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Stephen Warren
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   Stephen Warren
• [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to   Stephen Warren
• [PATCH 1/2] pinctrl: bcm2835: add pinctrl pre-processor define   Stephen Warren
• [PATCH] pinctrl: bcm2835: Fix support for threaded level triggered IRQs   Stephen Warren
• randconfig build error with next-20150413, in drivers/spi/spi-bcm2835.c   Stephen Warren
• [PATCH] ARM: BCM2835: Skip doing our own iotable_init() initialization.   Stephen Warren
• [PATCH 7/9] ARM: Add Kconfig support for bcm2836.   Stephen Warren
• BCM2836 (Raspberry Pi 2) port   Stephen Warren
• [PATCH 1/9] dt-bindings: Add root properties for Raspberry Pi 2.   Stephen Warren
• [PATCH 2/9] ARM: BCM2835: Split peripheral definitions off to a common include.   Stephen Warren
• [PATCH 3/9] ARM: Make a copy of the 2835 dts for the 2836.   Stephen Warren
• [PATCH 4/9] ARM: Update the device trees for 2836.   Stephen Warren
• [PATCH 8/9] ARM: Add MAINTAINERS for 2836.   Stephen Warren
• [PATCH 9/9] ARM: BCM283x: Register fixed clocks for uart in the DT.   Stephen Warren
• BCM2836 (Raspberry Pi 2) port   Stephen Warren
• [PATCH 9/9] ARM: BCM283x: Register fixed clocks for uart in the DT.   Stephen Warren
• [PATCH 2/2] ARM: BCM2835: Move the restart/power_off handling to the WDT driver.   Stephen Warren
• bcm2835: dma: strangeness of of_dma_request_slave_channel   Stephen Warren
• [PATCH 1/3 v5] dt/bindings: Add binding for the BCM2835 mailbox driver   Stephen Warren
• [PATCH 2/3 v6] mailbox: Enable BCM2835 mailbox support   Stephen Warren
• [PATCH 1/3] dt/bindings: Add binding for the Raspberry Pi firmware driver   Stephen Warren
• [PATCH 3/3] ARM: bcm2835: Add the necessary firmware driver information to the DT   Stephen Warren
• [PATCH 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Stephen Warren
• BCM2836 (Raspberry Pi 2) port   Stephen Warren
• [PATCH 1/3 v5] dt/bindings: Add binding for the BCM2835 mailbox driver   Stephen Warren
• [PATCH 3/3] ARM: bcm2835: Add the necessary firmware driver information to the DT   Stephen Warren
• [PATCH 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Stephen Warren
• [PATCH 2/3 v7] mailbox: Enable BCM2835 mailbox support   Stephen Warren
• [PATCH] dmaengine: bcm2835: Add slave dma support   Rogier Wolff
• [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us   kernel at martin.sperl.org
• [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup   kernel at martin.sperl.org
• [PATCH] spi: setting up cs_gpio levels prior to registering spi devices   kernel at martin.sperl.org
• [PATCH] spi: bcm2835: remove timeout code from polling function   kernel at martin.sperl.org
• [PATCH] spi: bcm2835: change timeout of polling driver to 1s   kernel at martin.sperl.org
• [PATCH] spi: bcm2835: fallback to interrupt for polling timeouts exceeding 2 jiffies   kernel at martin.sperl.org

Last message date: Thu Apr 30 20:01:55 PDT 2015
Archived on: Sun May 3 02:25:27 PDT 2015

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...