October 2015 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Oct 1 03:50:38 PDT 2015
Ending: Sat Oct 31 12:14:07 PDT 2015
Messages: 194

• [PATCH 0/6] ath10k: few checkpatch fixes   Kalle Valo
• [PATCH 1/6] ath10k: fix checkpatch warning about logical continuations   Kalle Valo
• [PATCH 2/6] ath10k: indentation fixes   Kalle Valo
• [PATCH 3/6] ath10k: brace style fixes   Kalle Valo
• [PATCH 4/6] ath10k: remove void function return statements   Kalle Valo
• [PATCH 5/6] ath10k: fix whitespace usage   Kalle Valo
• [PATCH 6/6] ath10k: split an unnecessary long line   Kalle Valo
• [PATCH] ath10k: only advertise mesh support in raw mode   Peter Oh
• Slow ramp-up for single-stream TCP throughput on 4.2 kernel.   Ben Greear
• Slow ramp-up for single-stream TCP throughput on 4.2 kernel.   Ben Greear
• Slow ramp-up for single-stream TCP throughput on 4.2 kernel.   Neal Cardwell
• Slow ramp-up for single-stream TCP throughput on 4.2 kernel.   Ben Greear
• Slow ramp-up for single-stream TCP throughput on 4.2 kernel.   Neal Cardwell
• Slow ramp-up for single-stream TCP throughput on 4.2 kernel.   Ben Greear
• Slow ramp-up for single-stream TCP throughput on 4.2 kernel.   Eric Dumazet
• Slow ramp-up for single-stream TCP throughput on 4.2 kernel.   Yuchung Cheng
• [PATCH] ath10k: optimize ce_lock on post rx buffer processing   Rajkumar Manoharan
• Slow ramp-up for single-stream TCP throughput on 4.2 kernel.   Ben Greear
• QCA6164 txbf failure   Andrew C. Dingman
• QCA6164 txbf failure   Andrew C. Dingman
• [PATCH v2] ath10k: Use station's current operating mode from assoc request   Kalle Valo
• [PATCH v3] ath10k: Use station's current operating mode from assoc request   Vivek Natarajan
• [ath10k] Disable multicast rates   Ángel Suero
• [PATCH 0/6] ath10k: few checkpatch fixes   Kalle Valo
• [PATCH 0/2] ath10k: implement debugfs interface for Transmit Power Control stats   Kalle Valo
• [PATCH] ath10k: use Rx decap mode configured when driver registered   Kalle Valo
• [PATCH] ath10k: use pre-allocated DMA buffer in Tx   Kalle Valo
• [PATCH 0/2] ath10k: implement board API 2 support   Kalle Valo
• [PATCH 1/2] ath10k: add board 2 API support   Kalle Valo
• [PATCH 2/2] ath10k: select board data based on BMI chip id and board id   Kalle Valo
• [ath6kl:pending 99/100] drivers/net/wireless/ath/ath10k/core.c:639:19: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t {aka long unsigned int}'   kbuild test robot
• [PATCH] ath10k: Fix OFDM rx-rate reporting.   greearb at candelatech.com
• [PATCH] Revert "mac80211: remove exposing 'mfp' to drivers"   c_traja at qti.qualcomm.com
• [PATCH 1/2] ath10k: Add abstraction layer for peer flags   c_traja at qti.qualcomm.com
• [PATCH 2/2] ath10k: set peer MFP flag in peer assoc command   c_traja at qti.qualcomm.com
• [PATCH 2/2] ath10k: set peer MFP flag in peer assoc command   kbuild test robot
• [PATCH 2/2] ath10k: set peer MFP flag in peer assoc command   Kalle Valo
• [PATCH 2/2] ath10k: set peer MFP flag in peer assoc command   Raja, Tamizh Chelvam
• [PATCH] ath10k: Enable adaptive CCA   c_mkenna at qti.qualcomm.com
• [PATCH] Revert "mac80211: remove exposing 'mfp' to drivers"   Peter Oh
• [PATCH] Revert "mac80211: remove exposing 'mfp' to drivers"   Peter Oh
• Best of the best watches in the world.   Memorable watches
• [PATCH] Revert "mac80211: remove exposing 'mfp' to drivers"   Johannes Berg
• [PATCH] ath10k: Fix cleanup in ath10k_thermal_unregister   Mohammed Shafi Shajakhan
• [PATCH] ath10k: use pre-allocated DMA buffer in Tx   Kalle Valo
• [PATCH] ath10k: Cleanup ath10k_mac_register() error handling   Jeff Johnson
• [PATCH] ath10k: use pre-allocated DMA buffer in Tx   Peter Oh
• [PATCH] ath10k: use pre-allocated DMA buffer in Tx   Kalle Valo
• [PATCH] ath10k: use pre-allocated DMA buffer in Tx   Peter Oh
• [PATCH] ath10k: Increase pci wakeup timeout to 30 ms   Kalle Valo
• [PATCH] ath10k: optimize ce_lock on post rx buffer processing   Kalle Valo
• [PATCH v3] ath10k: Use station's current operating mode from assoc request   Kalle Valo
• [PATCH] ath10k: Enable adaptive CCA   Kalle Valo
• [PATCH] ath10k: Fix OFDM rx-rate reporting.   Kalle Valo
• [PATCH 0/7] ath10k: add copy engine fast path support   Kalle Valo
• [PATCH 0/7] ath10k: add copy engine fast path support   Manoharan, Rajkumar
• [PATCH] ath10k: Enable adaptive CCA   Kennady Rajan, Maharaja
• [PATCHv2] ath10k: Enable adaptive CCA   c_mkenna at qti.qualcomm.com
• [PATCH v2 0/7] ath10k: add copy engine fast path support   Rajkumar Manoharan
• [PATCH v2 1/7] ath10k: export htc tx rx handlers   Rajkumar Manoharan
• [PATCH v2 2/7] ath10k: register per copy engine send completion callbacks   Rajkumar Manoharan
• [PATCH v2 3/7] ath10k: register per copy engine receive callbacks   Rajkumar Manoharan
• [PATCH v2 4/7] ath10k: export htt tx rx handlers   Rajkumar Manoharan
• [PATCH v2 5/7] ath10k: Configure copy engine 5 for HTT messages   Rajkumar Manoharan
• [PATCH v2 6/7] ath10k: remove unused dl_is_polled   Rajkumar Manoharan
• [PATCH v2 7/7] ath10k: remove htc polling for tx completion   Rajkumar Manoharan
• [PATCH] Revert "mac80211: remove exposing 'mfp' to drivers"   Johannes Berg
• [PATCH 0/2] ath10k: implement board API 2 support   Kalle Valo
• [PATCH] ath10k: Fix cleanup in ath10k_thermal_unregister   Kalle Valo
• [PATCH] ath10k: Cleanup ath10k_mac_register() error handling   Kalle Valo
• [PATCHv2] ath10k: Enable adaptive CCA   Kalle Valo
• [PATCH 0/2 v2] ath10k: print firwmare stats specific to firmware version   c_traja at qti.qualcomm.com
• [PATCH 1/2 v2] ath10k: Make fw stats prints specific to firmware version   c_traja at qti.qualcomm.com
• [PATCH 2/2 v2] ath10k: add fw_stats support to 10.4 firmware   c_traja at qti.qualcomm.com
• [PATCHv2] ath10k: Enable adaptive CCA   Kennady Rajan, Maharaja
• [PATCHv3] ath10k: Enable adaptive CCA   c_mkenna at qti.qualcomm.com
• [PATCHv2] ath10k: Enable adaptive CCA   Kennady Rajan, Maharaja
• [PATCH 1/5] ath10k: QCA988X hw2.0: add board.bin   Kalle Valo
• [PATCH 2/5] ath10k: QCA988X hw2.0: add firmware 10.2.4.70.9-2   Kalle Valo
• [PATCH 3/5] ath10k: QCA6174 hw2.1: add firmware WLAN.RM.1.1-00141 and board.bin   Kalle Valo
• [PATCH 4/5] ath10k: QCA6174 hw3.0: add WLAN.RM.2.0-00180-QCARMSWPZ-1   Kalle Valo
• [PATCH 5/5] ath10k: QCA99X0 hw2.0: add firmware 10.4.1.00030-1 and board.bin   Kalle Valo
• [PATCH 2/2 v2] ath10k: add fw_stats support to 10.4 firmware   Kalle Valo
• [PATCH v2 0/7] ath10k: add copy engine fast path support   Kalle Valo
• [PATCH 1/2 v2] ath10k: Make fw stats prints specific to firmware version   Kalle Valo
• FCC DFS support   Tim Harvey
• [PATCH 1/5] ath10k: QCA988X hw2.0: add board.bin   Ben Hutchings
• [PATCH 1/5] ath10k: QCA988X hw2.0: add board.bin   Ben Hutchings
• FCC DFS support   Zefir Kurtisi
• FCC DFS support   Tim Harvey
• [PATCH] ath10k: Disable PCI PS for QCA988X and QCA99X0   Kalle Valo
• [PATCH 0/2 v2] ath10k: print firwmare stats specific to firmware version   Kalle Valo
• [PATCH] ath10k: only advertise mesh support in raw mode   Kalle Valo
• [PATCH 0/2 v2] ath10k: print firwmare stats specific to firmware version   Raja, Tamizh Chelvam
• [PATCH] ath10k: consolidate if statements in ath10k_wmi_event_mgmt_rx   manikanta.pubbisetty at gmail.com
• [PATCHv2] ath10k: consolidate if statements in ath10k_wmi_event_mgmt_rx   manikanta.pubbisetty at gmail.com
• [PATCH v2] ath10k: add FW API support to test mode   Manikanta Pubbisetty
• [PATCH v2] ath10k: add FW API support to test mode   Kalle Valo
• [PATCH v3] ath10k: add fw_stats support to 10.4 firmware   c_traja at qti.qualcomm.com
• QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2   Enrico Tagliavini
• [PATCH 1/5] ath10k: QCA988X hw2.0: add board.bin   Kalle Valo
• [PATCH 1/5] ath10k: QCA988X hw2.0: add board.bin   Kalle Valo
• [PATCH] ath10k: add notice.txt references to WHENCE   Kalle Valo
• [PATCH] ath10k: add notice.txt references to WHENCE   Ben Hutchings
• [PATCH] ath10k: add notice.txt references to WHENCE   Kalle Valo
• [PATCH v2] ath10k: add notice.txt references to WHENCE   Kalle Valo
• [PATCH] ath10k: consolidate if statements in ath10k_wmi_event_mgmt_rx   kbuild test robot
• [PATCH v2] ath10k: add FW API support to test mode   Michal Kazior
• [PATCH v2] ath10k: add FW API support to test mode   Manikanta
• [PATCH v2] ath10k: add FW API support to test mode   Michal Kazior
• [PATCH 0/4] ath10k: remove shadow copy engine descriptors   Rajkumar Manoharan
• [PATCH 1/4] ath10k: use local memory instead of shadow descriptor in ce_send   Rajkumar Manoharan
• [PATCH 2/4] ath10k: remove send completion validation in diag read/write   Rajkumar Manoharan
• [PATCH 3/4] ath10k: cleanup copy engine send completion   Rajkumar Manoharan
• [PATCH 4/4] ath10k: remove shadow copy of CE descriptors for source ring   Rajkumar Manoharan
• Best watches!   Luxury boutique
• [PATCH] ath10k: Adjust the RX packet pad offset at QCA99X0 4addr mode   Yanbo Li
• [PATCH] ath10k: Adjust the RX packet pad offset at QCA99X0 4addr mode   Kalle Valo
• [PATCH] ath10k: Add support for pktlog in QCA99X0   Vivek Natarajan
• [PATCH] ath10k: Adjust the RX packet pad offset at QCA99X0 4addr mode   Li, Yanbo
• [PATCH] ath10k: Add support for pktlog in QCA99X0   kbuild test robot
• [PATCH] ath10k: Add support for pktlog in QCA99X0   kbuild test robot
• [PATCH v2 0/4] ath10k: remove shadow copy engine descriptors   Rajkumar Manoharan
• [PATCH v2 1/4] ath10k: use local memory instead of shadow descriptor in ce_send   Rajkumar Manoharan
• [PATCH v2 2/4] ath10k: remove send completion validation in diag read/write   Rajkumar Manoharan
• [PATCH v2 3/4] ath10k: cleanup copy engine send completion   Rajkumar Manoharan
• [PATCH v2 4/4] ath10k: remove shadow copy of CE descriptors for source ring   Rajkumar Manoharan
• QCA 4x4 board.bin issues.   Ben Greear
• QCA 4x4 board.bin issues.   Kalle Valo
• QCA 4x4 board.bin issues.   Ben Greear
• [PATCH V4] ath10k: Debugfs entry to enable/disable WLAN&Blutooth Coexist feature   Yanbo Li
• Support for QCA6174 [168c:003e]   Michael Krupp
• Support for QCA6174 [168c:003e]   Michal Kazior
• [PATCH] ath10k: update antenna configuration after setting in fw   manikanta.pubbisetty at gmail.com
• [PATCH] ath10k: update antenna configuration after setting in fw   Albino B Neto
• [PATCH] ath10k: update antenna configuration after setting in fw   Manikanta
• Specific MAC address impact performance   Yu-Chieh
• Specific MAC address impact performance   Ben Greear
• [PATCH] ath10k: update antenna configuration after setting in fw   Ben Greear
• Notice to Appear   State Court
• Specific MAC address impact performance   Yu-Chieh
• Specific MAC address impact performance   Ben Greear
• Support for QCA6174 [168c:003e]   Michael Krupp
• Station mode for 4x4 ath10k with 10.4.1.00030-1 ?   Ben Greear
• Support for QCA6174 [168c:003e]   Michal Kazior
• FAILED: patch "[PATCH] ath10k: fix DMA related firmware crashes on multiple devices" failed to apply to 4.2-stable tree   Kalle Valo
• Support for QCA6174 [168c:003e]   Michael Krupp
• Support for QCA6174 [168c:003e]   Michal Kazior
• QCA6174 bringup   Michael Krupp
• Support for QCA6174 [168c:003e]   Michael Krupp
• [PATCH 1/4] ath10k: remove supported chain mask   Rajkumar Manoharan
• [PATCH 2/4] ath10k: fill HT/VHT MCS rateset only for configured chainmask   Rajkumar Manoharan
• [PATCH 3/4] ath10k: move static HT/VHT capability setup functions   Rajkumar Manoharan
• [PATCH 4/4] ath10k: reload HT/VHT capabilities on antenna change   Rajkumar Manoharan
• Specific MAC address impact performance   Yu-Chieh
• Specific MAC address impact performance   Ben Greear
• Specific MAC address impact performance   Yu-Chieh
• [RESEND PATCH 01/10] net: wireless: ath: Remove unnecessary semicolon   Punit Vara
• [RESEND PATCH 02/10] net: wireless: ath: Remove unnecessary semicolon   Punit Vara
• [RESEND PATCH 03/10] net: wireless: rtwifi: Remove duplicated arguments to |   Punit Vara
• [RESEND PATCH 04/10] net: wireless: brcm80211: Remove duplicated arguments to |   Punit Vara
• [RESEND PATCH 05/10] net: wireless: simplify return flow for zd1201_setconfig16   Punit Vara
• [RESEND PATCH 06/10] net: wireless: ath: simplify return flow for carl9170_regwrite_result()   Punit Vara
• [RESEND PATCH 07/10] net: wireless: iwlegacy: Remove unneeded variable ret   Punit Vara
• [RESEND PATCH 08/10] net: wireless: brcm80211: Remove unneeded variable which return 0   Punit Vara
• [RESEND PATCH 09/10] net: wireless: brcm80211: Remove unneeded variable ret_code returning 0   Punit Vara
• [RESEND PATCH 10/10] net: wireless: ath: Remove unneeded variable ret returning 0   Punit Vara
• Crash in hacked 'ath' tree on module removal.   Ben Greear
• [PATCH] ath10k: add QCA9377 chipset support   Bartosz Markowski
• [PATCH] ath10k: add QCA9377 chipset support   kbuild test robot
• [PATCH] ath10k: add QCA9377 chipset support   Bartosz Markowski
• [RESEND PATCH 07/10] net: wireless: iwlegacy: Remove unneeded variable ret   Sergei Shtylyov
• [RESEND PATCH 07/10] net: wireless: iwlegacy: Remove unneeded variable ret   Sergei Shtylyov
• [PATCH v2] ath10k: add QCA9377 chipset support   Bartosz Markowski
• [PATCHv3] ath10k: Enable adaptive CCA   Kalle Valo
• [PATCH] ath10k: Add thermal throttling support for 10.4 firmware.   c_traja at qti.qualcomm.com
• [PATCH v2] ath10k: add FW API support to test mode   Kalle Valo
• [PATCH v2] ath10k: add FW API support to test mode   Kalle Valo
• [PATCH v3] ath10k: add fw_stats support to 10.4 firmware   Kalle Valo
• [PATCH v2 0/4] ath10k: remove shadow copy engine descriptors   Kalle Valo
• [PATCH 1/4] ath10k: remove supported chain mask   Kalle Valo
• [PATCH v2] ath10k: add QCA9377 chipset support   Kalle Valo
• [PATCH 0/3] Add new WMI defines to 10.4   Vasanthakumar Thiagarajan
• [PATCH 1/3] ath10k: Add new service defines for 10.4   Vasanthakumar Thiagarajan
• [PATCH 2/3] ath10k: Add new WMI cmd/event defines for 10.4   Vasanthakumar Thiagarajan
• [PATCH 3/3] ath10k: Add new pdev params defines to 10.4   Vasanthakumar Thiagarajan
• Support for QCA6174 [168c:003e]   Michael Krupp
• [PATCH v2] ath10k: Add support for pktlog in QCA99X0   Vivek Natarajan
• [PATCH V4] ath10k: Debugfs entry to enable/disable WLAN&Blutooth Coexist feature   Kalle Valo
• [PATCH] ath10k: debugfs file to enable Bluetooth coexistence feature   Kalle Valo
• [PATCH] ath10k: Add thermal throttling support for 10.4 firmware.   Kalle Valo
• [PATCH 2/2] ath10k: set peer MFP flag in peer assoc command   Kalle Valo
• Beam forming support   sunder
• Best watches for best!   Luxury watches

Last message date: Sat Oct 31 12:14:07 PDT 2015
Archived on: Sat Oct 31 13:22:28 PDT 2015

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...