January 2015 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Thu Jan 1 07:42:08 EST 2015
Ending: Sat Jan 31 09:00:47 EST 2015
Messages: 660

• [OpenWrt-Devel] (no subject)   Karl Palsson
• [OpenWrt-Devel] (no subject)   John Crispin
• [OpenWrt-Devel] 090-backport_netfilter_rtcache.patch and IPsec routing/connection errors/packet loss   Stijn Tintel
• [OpenWrt-Devel] [for 14.07] ca-certificates: update to 20141019   Christian Schoenebeck
• [OpenWrt-Devel] [Luci2] Problems since 2015-01-05-e28f8f6   Christian Schoenebeck
• [OpenWrt-Devel] [Luci2] Problems since 2015-01-05-e28f8f6   Christian Schoenebeck
• [OpenWrt-Devel] [Luci2] Problems since 2015-01-05-e28f8f6   Jo-Philipp Wich
• [OpenWrt-Devel] [Luci2] Problems since 2015-01-05-e28f8f6   Christian Schoenebeck
• [OpenWrt-Devel] [Luci2] Problems since 2015-01-05-e28f8f6   Jo-Philipp Wich
• [OpenWrt-Devel] [Luci2] Problems since 2015-01-05-e28f8f6   Christian Schoenebeck
• [OpenWrt-Devel] [OFF] Can't join openwrt-users   Bráulio Bhavamitra
• [OpenWrt-Devel] [OpenWrt] #13951: Revision r36939 breaks support for RT5370 (rt2800usb) in HG556a (brcm6358)   Luis Soltero
• [OpenWrt-Devel] [OpenWrt] #18539: RTL8192cu driver stability issues   Derek & Vicky
• [OpenWrt-Devel] [PATCH, RESEND] package/binutils: actually support the target toolchain   Harald Geyer
• [OpenWrt-Devel] [PATCH, v2] feeds: search packages by license   Eric Schultz
• [OpenWrt-Devel] [PATCH, v2] feeds: search packages by license   John Crispin
• [OpenWrt-Devel] [PATCH, v3] feeds: search packages by license   Eric Schultz
• [OpenWrt-Devel] [PATCH 0/4] uci: a few enhancements.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 0/4] uci: a few enhancements.   Felix Fietkau
• [OpenWrt-Devel] [PATCH 0/5] ar8216: Patch series with further improvements and new functionality   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 0/5] ar8216: Patch series with further improvements and new functionality   Felix Fietkau
• [OpenWrt-Devel] [PATCH 0/6] ar8216: patch series for AR8327/AR8337   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 0/6] ar8216: patch series for AR8327/AR8337   John Crispin
• [OpenWrt-Devel] [PATCH 0/6] ar8216: patch series for AR8327/AR8337   Felix Fietkau
• [OpenWrt-Devel] [PATCH 0/9] mvebu: Fix flash support and support for A38x   Maxime Ripard
• [OpenWrt-Devel] [PATCH 0/9] mvebu: Fix flash support and support for A38x   SGT. Garcia
• [OpenWrt-Devel] [PATCH 00/10] kernel/modules: add kmod-crypto-gcm and deps   Stijn Tintel
• [OpenWrt-Devel] [PATCH 01/10] kernel/modules: remove superfluous backslash   Stijn Tintel
• [OpenWrt-Devel] [PATCH 02/10] kernel/modules: add kmod-crypto-aead   Stijn Tintel
• [OpenWrt-Devel] [PATCH 03/10] kernel/modules: kmod-crypto-manager: depend on kmod-crypto-aead   Stijn Tintel
• [OpenWrt-Devel] [PATCH 04/10] kernel/modules: remove CRYPTOMGR_MODULES   Stijn Tintel
• [OpenWrt-Devel] [PATCH 05/10] kernel/modules: add kmod-crypto-seqiv   Stijn Tintel
• [OpenWrt-Devel] [PATCH 06/10] kernel/modules: add kmod-crypto-ctr   Stijn Tintel
• [OpenWrt-Devel] [PATCH 07/10] kernel/modules: add kmod-crypto-gf128   Stijn Tintel
• [OpenWrt-Devel] [PATCH 08/10] kernel/modules: kmod-crypto-xts: depend on kmod-crypto-gf128   Stijn Tintel
• [OpenWrt-Devel] [PATCH 09/10] kernel/modules: add kmod-crypto-ghash   Stijn Tintel
• [OpenWrt-Devel] [PATCH 1/2] added board support for compex wpj558   Christian Mehlis
• [OpenWrt-Devel] [PATCH 1/2] modules: f2fs: add missing symbols for 3.18   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/2] octeon: remove config-default   Stijn Tintel
• [OpenWrt-Devel] [PATCH 1/2] sunxi: implement board_detect for device-tree kernels   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/2] target: kirkwood: fix leds defaults config   drEagle
• [OpenWrt-Devel] [PATCH 1/2] target: kirkwood: fix leds defaults config   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] uboot-envtools: fix Linksys EA3500 env size   Claudio Leite
• [OpenWrt-Devel] [PATCH 1/2] uboot-envtools: fix Linksys EA3500 env size   Luka Perkov
• [OpenWrt-Devel] [PATCH 1/3] [Lantiq] [P2812HNUFX] Remove old dts   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] kirkwood: drop port-based VLAN setup   Claudio Leite
• [OpenWrt-Devel] [PATCH 1/3] kirkwood: drop port-based VLAN setup   Luka Perkov
• [OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT   wengbj
• [OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT   fl.service at t-firefly.com
• [OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT   wengbj
• [OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT   wengbj
• [OpenWrt-Devel] [PATCH 1/3] ralink: add ethernet macaddr to dts for FireWRT   fl.service at t-firefly.com
• [OpenWrt-Devel] [PATCH 1/3 v3] [Lantiq] [P2812HNUFX] Add device tree for P2812HNUF1 and P2812HNUF3   Sylwester Petela (ScApi)
• [OpenWrt-Devel] [PATCH 1/4] ar8216: add reading ARL table for AR8216/AR8236/AR8316   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 1/4] ar8216: add reading ARL table for AR8216/AR8236/AR8316   Chris Green
• [OpenWrt-Devel] [PATCH 1/4] ar8216: add reading ARL table for AR8216/AR8236/AR8316   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 1/4] ar8216: add reading ARL table for AR8216/AR8236/AR8316   Chris Green
• [OpenWrt-Devel] [PATCH 1/4] lantiq: Fix initscript issue   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH 1/4] mvsw6171: rename to 'mvsw61xx'   Claudio Leite
• [OpenWrt-Devel] [PATCH 1/4] mvsw6171: rename to 'mvsw61xx'   Luka Perkov
• [OpenWrt-Devel] [PATCH 1/4] tests: add test cases for showing nonexistent section and option.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/5] ar8216: fix ATU flushing   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 1/5] uloop: fix out-of-bound loop index.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/5] uloop: fix out-of-bound loop index.   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/5] uloop: fix out-of-bound loop index.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/6] ar8216: define all switch_addr structs as const   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 1/7] kernel: add missing symbols for 3.18   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/7] kernel: add missing symbols for 3.18   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH 1/8] packages: uboot-sunxi: fix GMAC TX delay for Bananapi   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/9] mvebu: Replace the padjffs2 call by the generic definition   Maxime Ripard
• [OpenWrt-Devel] [PATCH 1/9] mvebu: Replace the padjffs2 call by the generic definition   Imre Kaloz
• [OpenWrt-Devel] [PATCH 10/10] kernel/modules: add kmod-crypto-gcm   Stijn Tintel
• [OpenWrt-Devel] [PATCH 2/2] kirkwood: enable switch on Linksys EA3500   Claudio Leite
• [OpenWrt-Devel] [PATCH 2/2] kirkwood: enable switch on Linksys EA3500   Luka Perkov
• [OpenWrt-Devel] [PATCH 2/2] modules: f2fs: enable support for xattr   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/2] octeon: enable VLAN support   Stijn Tintel
• [OpenWrt-Devel] [PATCH 2/2] package: add timer led function   drEagle
• [OpenWrt-Devel] [PATCH 2/2] package: add timer led function   Luka Perkov
• [OpenWrt-Devel] [PATCH 2/2] scripts: remote-gdb: Fix sysroot detection   Karl Palsson
• [OpenWrt-Devel] [PATCH 2/2] sunxi: introduce sunxi_board_name() in /lib/sunxi.sh   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/2] wpj558: use own partition for rootfs   Christian Mehlis
• [OpenWrt-Devel] [PATCH 2/3] kirkwood: fix EA3500 ubi options   Claudio Leite
• [OpenWrt-Devel] [PATCH 2/3] kirkwood: fix EA3500 ubi options   Luka Perkov
• [OpenWrt-Devel] [PATCH 2/3] ralink: add FireWRT led detail   wengbj
• [OpenWrt-Devel] [PATCH 2/3] ralink: add FireWRT led detail   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/3] ralink: add FireWRT led detail   wengbj
• [OpenWrt-Devel] [PATCH 2/3] ralink: add FireWRT led detail   wengbj
• [OpenWrt-Devel] [PATCH 2/3 v3] [Lantiq] [P2812HNUFX] Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK   Sylwester Petela (ScApi)
• [OpenWrt-Devel] [PATCH 2/4] ar8216: add ARL table flushing per port   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 2/4] cli: properly unload package before quit.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/4] mvsw61xx: rework chip recognition   Claudio Leite
• [OpenWrt-Devel] [PATCH 2/4] Preserve bootloader command line on MIPS   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH 2/5] ar8216: add link change detection for switch ports   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 2/5] ustream: add function ustream_read().   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/6] ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriate   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 2/7] uboot-sunxi: use git source instead of giant patch   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/8] packages: uboot-sunxi: uEnv is used as a script rather than default env   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/8] packages: uboot-sunxi: uEnv is used as a script rather than default env   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH 2/9] mvebu: Switch to the generic mkuimage macro   Maxime Ripard
• [OpenWrt-Devel] [PATCH 2/9] mvebu: Switch to the generic mkuimage macro   Imre Kaloz
• [OpenWrt-Devel] [PATCH 2/9] mvebu: Switch to the generic mkuimage macro   Felix Fietkau
• [OpenWrt-Devel] [PATCH 3/3] kirkwood: enable swconfig by default on EA3500   Claudio Leite
• [OpenWrt-Devel] [PATCH 3/3] kirkwood: enable swconfig by default on EA3500   Luka Perkov
• [OpenWrt-Devel] [PATCH 3/3] ralink: add FireWRT button detail   wengbj
• [OpenWrt-Devel] [PATCH 3/3] ralink: add FireWRT button detail   wengbj
• [OpenWrt-Devel] [PATCH 3/3] ralink: add FireWRT button detail   wengbj
• [OpenWrt-Devel] [PATCH 3/3 v3] [Lantiq] [P2812HNUFX] Remove old P2812HNUFX dts   Sylwester Petela (ScApi)
• [OpenWrt-Devel] [PATCH 3/4] ar8216: adjust ATU flushing in case of link changes   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 3/4] cli: enhance "uci show" command on nonexistent sections and options.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 3/4] lantiq: Restore call to orphaned etop function   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH 3/4] mvsw61xx: clean up and expand register definitions   Claudio Leite
• [OpenWrt-Devel] [PATCH 3/5] ar8216: decrease page switch wait time   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 3/5] ustream-fd: fix logic invert of write polling.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 3/6] ar8216: introduce ar8xxx_reg_clear complementing ar8xxx_reg_set   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 3/7] uboot-sunxi: fix bananapro target   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/7] uboot-sunxi: fix bananapro target   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH 3/8] packages: uboot-sunxi: add support for Lamobo R1   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/9] kernel: Allow ubi autoattach to run on NOR flash   Maxime Ripard
• [OpenWrt-Devel] [PATCH 3/9] kernel: Allow ubi autoattach to run on NOR flash   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 3/9] kernel: Allow ubi autoattach to run on NOR flash   Imre Kaloz
• [OpenWrt-Devel] [PATCH 3/9] kernel: Allow ubi autoattach to run on NOR flash   Maxime Ripard
• [OpenWrt-Devel] [PATCH 3/9] kernel: Allow ubi autoattach to run on NOR flash   Maxime Ripard
• [OpenWrt-Devel] [PATCH 3/9] kernel: Allow ubi autoattach to run on NOR flash   Imre Kaloz
• [OpenWrt-Devel] [PATCH 3/9] kernel: Allow ubi autoattach to run on NOR flash   Maxime Ripard
• [OpenWrt-Devel] [PATCH 3/9] kernel: Allow ubi autoattach to run on NOR flash   Imre Kaloz
• [OpenWrt-Devel] [PATCH 3/9] kernel: Allow ubi autoattach to run on NOR flash   Maxime Ripard
• [OpenWrt-Devel] [PATCH 4/4] Add a few notes on the return value of uci_lookup_ptr().   Yousong Zhou
• [OpenWrt-Devel] [PATCH 4/4] ar8216: add swconfig attributes for ARL table flushing   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 4/4] lantiq: DGN3500 cleanups   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH 4/4] mvsw61xx: track and set per-VLAN port state in STU   Claudio Leite
• [OpenWrt-Devel] [PATCH 4/5] ar8216: add swconfig attribute to display ARL table on AR8327/AR8337   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 4/5] uloop: optimize uloop_timeout_set() implementaiton a bit.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 4/6] ar8216: introduce enable_eee swconfig attribute to control 802.3az EEE per port   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 4/7] sunxi: fix DTS syntax in bananapro device tree   Daniel Golle
• [OpenWrt-Devel] [PATCH 4/8] sunxi: implement board_detect for device-tree kernels   Daniel Golle
• [OpenWrt-Devel] [PATCH 4/9] mvebu: Add sub-profiles   Maxime Ripard
• [OpenWrt-Devel] [PATCH 4/9] mvebu: Add sub-profiles   Imre Kaloz
• [OpenWrt-Devel] [PATCH 4/9] mvebu: Add sub-profiles   Maxime Ripard
• [OpenWrt-Devel] [PATCH 5/5] ar8216: prefix mii_xxx functions to avoid kernel namespace pollution   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 5/5] utils: use clock_get_time() for clock_gettime() on Apple.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 5/5] utils: use clock_get_time() for clock_gettime() on Apple.   Felix Fietkau
• [OpenWrt-Devel] [PATCH 5/6] ar8216: add 802.3az EEE info to swconfig get_link attribute   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 5/7] sunxi: merge upstream devicetree improvements for bananapro   Daniel Golle
• [OpenWrt-Devel] [PATCH 5/7] sunxi: merge upstream devicetree improvements for bananapro   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH 5/8] sunxi: introduce sunxi_board_name() in /lib/sunxi.sh   Daniel Golle
• [OpenWrt-Devel] [PATCH 5/9] mvebu: Add NOR sub-profile implementation   Maxime Ripard
• [OpenWrt-Devel] [PATCH 6/6] ar8216: display flow control info in swconfig get_link in case of autonegatiation too   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 6/7] uboot-sunxi: add support for Lamobo R1   Daniel Golle
• [OpenWrt-Devel] [PATCH 6/8] sunxi: use sunxi_board_name when generating default network settings   Daniel Golle
• [OpenWrt-Devel] [PATCH 6/9] mvebu: Fix NAND and NOR options   Maxime Ripard
• [OpenWrt-Devel] [PATCH 7/7] sunxi: add support for Lamobo R1   Daniel Golle
• [OpenWrt-Devel] [PATCH 7/7] sunxi: add support for Lamobo R1   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH 7/8] sunxi: add support for Lamobo R1   Daniel Golle
• [OpenWrt-Devel] [PATCH 7/8] sunxi: add support for Lamobo R1   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH 7/8] sunxi: add support for Lamobo R1   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH 7/9] mvebu: Switch to 3.18   Maxime Ripard
• [OpenWrt-Devel] [PATCH 7/9] mvebu: Switch to 3.18   Imre Kaloz
• [OpenWrt-Devel] [PATCH 8/8] sunxi: workaround switch being uninitialized on netifd startup   Daniel Golle
• [OpenWrt-Devel] [PATCH 8/9] mvebu: Add the Armada 385 Reference Design support   Maxime Ripard
• [OpenWrt-Devel] [PATCH 8/9] mvebu: Add the Armada 385 Reference Design support   Imre Kaloz
• [OpenWrt-Devel] [PATCH 8/9] mvebu: Add the Armada 385 Reference Design support   Maxime Ripard
• [OpenWrt-Devel] [PATCH 8/9] mvebu: Add the Armada 385 Reference Design support   Imre Kaloz
• [OpenWrt-Devel] [PATCH 8/9] mvebu: Add the Armada 385 Reference Design support   Maxime Ripard
• [OpenWrt-Devel] [PATCH 8/9] mvebu: Add the Armada 385 Reference Design support   Imre Kaloz
• [OpenWrt-Devel] [PATCH 9/9] mvebu: Add Armada 385 DB AP support   Maxime Ripard
• [OpenWrt-Devel] [PATCH 9/9] mvebu: Add Armada 385 DB AP support   Imre Kaloz
• [OpenWrt-Devel] [PATCH 9/9] mvebu: Add Armada 385 DB AP support   Maxime Ripard
• [OpenWrt-Devel] [PATCH] [ar71xx] Add default LED configuration for D-Link DIR-615 rev. C1   Vincent Wiemann
• [OpenWrt-Devel] [PATCH] [ar71xx] add Netgear WNR1000v2/WNR1000v2-VC support (#18633)   Ștefan Rusu
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   openwrt at rogerpueyo.com
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   Gioacchino Mazzurco
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   Gioacchino Mazzurco
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   Bruno Randolf
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   郭传鈜
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   John Crispin
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   Hartmut Knaack
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   郭传鈜
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH][ar71xx] Mikrotik Routerboard RB2011 switch fix   Soren Harward
• [OpenWrt-Devel] [PATCH][ar71xx] Mikrotik Routerboard RB2011 switch fix   Soren Harward
• [OpenWrt-Devel] [PATCH][ar71xx] Mikrotik Routerboard RB2011 switch fix   Chris Green
• [OpenWrt-Devel] [PATCH][ar71xx] Mikrotik Routerboard RB2011 switch fix   Chris Green
• [OpenWrt-Devel] [PATCH][ar71xx] Mikrotik Routerboard RB2011 switch fix   Soren Harward
• [OpenWrt-Devel] [PATCH][ar71xx] Mikrotik Routerboard RB2011 switch fix   Chris Green
• [OpenWrt-Devel] [PATCH] [mvebu] use mvsw61xx   Mark Milburn
• [OpenWrt-Devel] [PATCH] [mvebu] use mvsw61xx   Luka Perkov
• [OpenWrt-Devel] [PATCH] [mvebu] WRT1900AC set default switch config   Mark Milburn
• [OpenWrt-Devel] [PATCH] [mvebu] WRT1900AC set default switch config   mark milburn
• [OpenWrt-Devel] [PATCH] [mvebu] WRT1900AC set default switch config   Mark Milburn
• [OpenWrt-Devel] [PATCH] [package] openvpn: procd_set_param respawn   Lars
• [OpenWrt-Devel] [PATCH] [packages] dansguardian: Bump to 2.12.0.3   hanno
• [OpenWrt-Devel] [PATCH] [packages] dansguardian: Bump to 2.12.0.3   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [packages] dnsmasq: add option --quiet-dhcp   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [packages] dnsmasq: add option --quiet-dhcp   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] [packages] dnsmasq: add option --quiet-dhcp   Lars Kruse
• [OpenWrt-Devel] [PATCH] [packages] dnsmasq: add option --quiet-dhcp   edgar.soldin at web.de
• [OpenWrt-Devel] [PATCH] [packages] dnsmasq: add option --quiet-dhcp   Lars Kruse
• [OpenWrt-Devel] [PATCH] [packages] kernel: kmod-w1 - missing netlink support   Daniel Wiegert
• [OpenWrt-Devel] [PATCH] [packages] kernel: kmod-w1 - missing netlink support   Hartmut Knaack
• [OpenWrt-Devel] [Patch] [packages] new package dansguardian   hanno
• [OpenWrt-Devel] [Patch] [packages] new package dansguardian   Jiri Slachta
• [OpenWrt-Devel] [Patch] [packages] new package dansguardian   Paul Fertser
• [OpenWrt-Devel] [PATCH] [packages] new package squid3   hanno
• [OpenWrt-Devel] [PATCH] [packages] new package squid3   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [packages_extra] snort: add missing libuuid dependency   daniel
• [OpenWrt-Devel] [PATCH] [packages_extra] snort: add missing libuuid dependency   John Crispin
• [OpenWrt-Devel] [PATCH] [ramips] : add support for Kingston MLWG2   L. D. Pinney
• [OpenWrt-Devel] [PATCH] [RESEND] [v2] base-files: Use 200ms LED timing as before for the new phase preinit_regular.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] [scripts] feeds: search packages by license   John Crispin
• [OpenWrt-Devel] [PATCH] [scripts] feeds: search packages by license   Eric Schultz
• [OpenWrt-Devel] [patch] [x86] Backport hyperv change the receive buffer size for legacy hosts to 3.14 tree   Ning Ye
• [OpenWrt-Devel] [Patch] [x86_64] Enable multi-processor support and hyperthreading by default   hanno
• [OpenWrt-Devel] [PATCH] added support for TL-WA701ND v2   Luigi Tarenga
• [OpenWrt-Devel] [PATCH] added support for TL-WA701ND v2   Luigi Tarenga
• [OpenWrt-Devel] [PATCH] Adding support for 6LoWPAN over Bluetooth Low Energy in kernel 3.18.   Duda, Lukasz
• [OpenWrt-Devel] [PATCH] Adding support for 6LoWPAN over Bluetooth Low Energy in kernel 3.18.   John Crispin
• [OpenWrt-Devel] [PATCH] Adding support for 6LoWPAN over Bluetooth Low Energy in kernel 3.18.   John Crispin
• [OpenWrt-Devel] [PATCH] Add kmod-w1-slave-ds2413   Wouter Paesen
• [OpenWrt-Devel] [PATCH] add pkgconfig information for popt library   Mike Brady
• [OpenWrt-Devel] [PATCH] add pkgconfig information for popt library   Mike Brady
• [OpenWrt-Devel] [PATCH] all targets: remove all =m kernel config symbols   Daniel Golle
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx: add support for TP-LINK TL-WA701ND v2   Luigi Tarenga
• [OpenWrt-Devel] [PATCH] ar71xx: add support for TP-LINK TL-WA701ND v2   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx: add support for TP-LINK TL-WR843ND v1   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] ar71xx: fix board detection for TP-LINK TL-WA860RE   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] base-files: Enhancements to /etc/profile.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] base-files: Enhancements to /etc/profile.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] BB : ramips : Backport for Kingston MLWG2   L. D. Pinney
• [OpenWrt-Devel] [PATCH] build: allow changing kernel name in new image code   Claudio Leite
• [OpenWrt-Devel] [PATCH] build: allow changing kernel name in new image code   Felix Fietkau
• [OpenWrt-Devel] [PATCH] build: allow openwrt.git packages to be replaced by feeds   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] build: allow openwrt.git packages to be replaced by feeds   John Crispin
• [OpenWrt-Devel] [PATCH] build: allow openwrt.git packages to be replaced by feeds   Olivari, Mathieu
• [OpenWrt-Devel] [PATCH] build: explicitly unexport CONFIG_SITE   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] build: explicitly unexport CONFIG_SITE   Felix Fietkau
• [OpenWrt-Devel] [PATCH] comgt-ncm: Fix NCM protocol   Matti Laakso
• [OpenWrt-Devel] [PATCH] comgt-ncm: Fix NCM protocol   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] comgt-ncm: Fix NCM protocol   Matti Laakso
• [OpenWrt-Devel] [PATCH] Comgt: Add option to ignore ioctl errors   John Crispin
• [OpenWrt-Devel] [PATCH] comgt: Allow using non-TTY devices   Matti Laakso
• [OpenWrt-Devel] [PATCH] comgt: Allow using non-TTY devices   John Crispin
• [OpenWrt-Devel] [PATCH] config: fix typo in Global build settings menu   Daniel Golle
• [OpenWrt-Devel] [PATCH] curl: enable "https" protocol   Felix Fietkau
• [OpenWrt-Devel] [PATCH] curl: enable "https" protocol   Lars Kruse
• [OpenWrt-Devel] [PATCH] feeds.conf.default: add dlan feed   Florian Fainelli
• [OpenWrt-Devel] [PATCH] feeds.conf.default: add dlan feed   Michael Heimpold
• [OpenWrt-Devel] [PATCH] firewall3: fix left shift on 64 bit systems in fw3_bitlen2netmask   Ulrich Weber
• [OpenWrt-Devel] [PATCH] firewall3: fix left shift on 64 bit systems in fw3_bitlen2netmask   Yousong Zhou
• [OpenWrt-Devel] [PATCH] firewall3: Immediate continue when no source is specified as it is used later on (seg fault)   Kim De Mey
• [OpenWrt-Devel] [PATCH] firewall3: Immediate continue when no source is specified as it is used later on (seg fault)   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] firewall3: Immediate continue when no source is specified as it is used later on (seg fault)   Kim De Mey
• [OpenWrt-Devel] [PATCH] fix typo in netifd.sh   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] fix typo in netifd.sh   John Crispin
• [OpenWrt-Devel] [PATCH] fix typo in netifd.sh   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] fix typo in netifd.sh   John Crispin
• [OpenWrt-Devel] [PATCH] fix typo in netifd.sh   Felix Fietkau
• [OpenWrt-Devel] [PATCH] fstools: update to the latest git HEAD   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] hostapd: Add client association log file   Stefan Tomanek
• [OpenWrt-Devel] [PATCH] hostapd: add dependency to hostapd-common   Nathan Hintz
• [OpenWrt-Devel] [PATCH] hostapd: backport BSSID black/whitelists   Stefan Tomanek
• [OpenWrt-Devel] [PATCH] hostapd: backport BSSID black/whitelists   Stefan Tomanek
• [OpenWrt-Devel] [PATCH] hostapd: backport BSSID black/whitelists   John Crispin
• [OpenWrt-Devel] [PATCH] hostapd: backport BSSID black/whitelists   Stefan Tomanek
• [OpenWrt-Devel] [PATCH] igmpproxy: add patch to silence unnecessary logging of downstream igmp traffic   Antti Seppälä
• [OpenWrt-Devel] [PATCH] igmpproxy: add patch to silence unnecessary logging of downstream igmp traffic   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Initramfs image copied to bin for malta builds   Eric Schultz
• [OpenWrt-Devel] [PATCH] Initramfs image copied to bin for malta builds   Imre Kaloz
• [OpenWrt-Devel] [PATCH] iproute2: bump version to v3.18.0, add package for bridge program   Steven Barth
• [OpenWrt-Devel] [PATCH] iproute2: bump version to v3.18.0, add package for bridge program   Russell Senior
• [OpenWrt-Devel] [PATCH] iproute2: bump version to v3.18.0, add package for bridge program   Steven Barth
• [OpenWrt-Devel] [PATCH] iproute2: bump version to v3.18.0, add package for bridge program   Jonathan Thibault
• [OpenWrt-Devel] [PATCH] iptables: IPv6 addresses with some mask values cause memory corruption   Jan Čermák
• [OpenWrt-Devel] [PATCH] kernel/hwmon: package pwm-fan kernel module   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: add references to openwrt alternative button handling   Karl Palsson
• [OpenWrt-Devel] [PATCH] kernel: add support for NFSv4   W. Michael Petullo
• [OpenWrt-Devel] [PATCH] kernel: bridge: multicast: backport a few more fixes for 3.10   Linus Lüssing
• [OpenWrt-Devel] [PATCH] kernel: bridge: multicast: backport a few more fixes for 3.10   Linus Lüssing
• [OpenWrt-Devel] [PATCH] kernel: bridge: multicast: backport a few more fixes for 3.10   Felix Fietkau
• [OpenWrt-Devel] [PATCH] kirkwood: add wpad-mini to guruplug profile   Nathan Hintz
• [OpenWrt-Devel] [PATCH] kirkwood: add wpad-mini to guruplug profile   Luka Perkov
• [OpenWrt-Devel] [PATCH] kirkwood: define ethernet aliases in the device tree   Nathan Hintz
• [OpenWrt-Devel] [PATCH] kirkwood: include kernel images and DTB in rootfs   Nathan Hintz
• [OpenWrt-Devel] [PATCH] kirkwood: include kernel images and DTB in rootfs   Daniel Golle
• [OpenWrt-Devel] [PATCH] kirkwood: include kernel images and DTB in rootfs   Nathan Hintz
• [OpenWrt-Devel] [PATCH] kirkwood: modify guruplug profile name   Nathan Hintz
• [OpenWrt-Devel] [PATCH] lantiq: correct value for fpi clock on ar9   Ben Mulvihill
• [OpenWrt-Devel] [PATCH] lantiq: correct value for fpi clock on ar9   John Crispin
• [OpenWrt-Devel] [PATCH] lantiq: correct value for fpi clock on ar9   Ben Mulvihill
• [OpenWrt-Devel] [PATCH] lantiq: correct value for fpi clock on ar9   John Crispin
• [OpenWrt-Devel] [PATCH] lantiq: correct value for fpi clock on ar9   Ben Mulvihill
• [OpenWrt-Devel] [PATCH] libertas: configure sysfs symlinks   Nathan Hintz
• [OpenWrt-Devel] [PATCH] libertas: set wireless macaddr   Nathan Hintz
• [OpenWrt-Devel] [PATCH] list: remove double freeing of section   yegorslists at googlemail.com
• [OpenWrt-Devel] [PATCH] list: remove double freeing of section   Felix Fietkau
• [OpenWrt-Devel] [PATCH] list: remove double freeing of section   Yegor Yefremov
• [OpenWrt-Devel] [PATCH] mac80211: Add some missing 802.11n capabilities to hostapd configuration   Robert Hancock
• [OpenWrt-Devel] [PATCH] mac80211: Add some missing 802.11n capabilities to hostapd configuration   Felix Fietkau
• [OpenWrt-Devel] [PATCH] mac80211: fix fallback to macaddr   Nathan Hintz
• [OpenWrt-Devel] [PATCH] mac80211: fix NULL pointer crash in monitor frame injection TX path   Johan Almbladh
• [OpenWrt-Devel] [PATCH] mac80211: Revert adding SM Power Save capability to hostapd configuration   Robert Hancock
• [OpenWrt-Devel] [PATCH] mac80211: update libertas_sdio package name   Nathan Hintz
• [OpenWrt-Devel] [PATCH] mdns: install uci package as config   Alexander Couzens
• [OpenWrt-Devel] [PATCH] mdns: install uci package as config   Luka Perkov
• [OpenWrt-Devel] [PATCH] modules: add lz4 compression support   Nathan Hintz
• [OpenWrt-Devel] [PATCH] modules: select grace_period config option for nfs-common   Nathan Hintz
• [OpenWrt-Devel] [PATCH] mwlwifi - dont break fw upload timing with log prints   Ian Kent
• [OpenWrt-Devel] [PATCH] netifd: Make interface identifier of delegated IPv6 address configurable   Hans Dedecker
• [OpenWrt-Devel] [PATCH] package-ipkg.mk: allow to install CC packages on older versions   Christian Schoenebeck
• [OpenWrt-Devel] [PATCH] package-ipkg.mk: allow to install CC packages on older versions   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] package makefile for kernel module "hdpvr"   Ian Cass
• [OpenWrt-Devel] [PATCH] procd: delay inittab workers until the tty exists.   Owen Kirby
• [OpenWrt-Devel] [PATCH] procd: delay inittab workers until the tty exists.   John Crispin
• [OpenWrt-Devel] [PATCH] procd: delay inittab workers until the tty exists.   Owen Kirby
• [OpenWrt-Devel] [PATCH] procd: delay inittab workers until the tty exists.   John Crispin
• [OpenWrt-Devel] [PATCH] procd: increase memory allocated for tmpfs on zram   Nathan Hintz
• [OpenWrt-Devel] [PATCH] procd: reorder the arguments of command invocations   Gianluca Anzolin
• [OpenWrt-Devel] [PATCH] procd: reorder the arguments of command invocations   Felix Fietkau
• [OpenWrt-Devel] [PATCH] procd: reorder the arguments of command invocations   Gianluca Anzolin
• [OpenWrt-Devel] [PATCH] procd: reorder the arguments of command invocations   Gianluca Anzolin
• [OpenWrt-Devel] [PATCH] procd: reorder the arguments of command invocations   Felix Fietkau
• [OpenWrt-Devel] [PATCH] procd: reorder the arguments of command invocations   Gianluca Anzolin
• [OpenWrt-Devel] [PATCH] ralink: add support for firewrt   John Crispin
• [OpenWrt-Devel] [PATCH] ralink: check ethernet MAC address whether it is valid   wengbj
• [OpenWrt-Devel] [PATCH] ralink: fix USB host function for Intenso M2M   Christian Lamparter
• [OpenWrt-Devel] [PATCH] ramips: add i2c pingroup to the pinmux for rt-n14u   Pavel Löbl
• [OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0   Christian Lamparter
• [OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0   Christian Lamparter
• [OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0   Christian Lamparter
• [OpenWrt-Devel] [PATCH] ramips: add support for Tenda 3G150B   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] ramips: fix default led configuration for rt-n14u   Pavel Löbl
• [OpenWrt-Devel] [PATCH] ramips: HooToo HT-TM02 factory image generation.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] ramips: HooToo HT-TM02 factory image generation.   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: HooToo HT-TM02 factory image generation.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] ramips: HooToo HT-TM02 factory image generation.   Florian Fainelli
• [OpenWrt-Devel] [PATCH] ramips: HooToo HT-TM02 factory image generation.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] ramips: improve and fix Memory 2 Move support   Christian Lamparter
• [OpenWrt-Devel] [PATCH] ramips: revert failsafe switch workaround for RT5350 introduced in r42179.   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: revert failsafe switch workaround for RT5350 introduced in r42179.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] scripts: remote-gdb: fix detection with multiple targets   Karl Palsson
• [OpenWrt-Devel] [PATCH] sunxi: disable MMC debugging in kernel config   Daniel Golle
• [OpenWrt-Devel] [PATCH] Support for building an hardened OpenWRT   Alessandro Di Federico
• [OpenWrt-Devel] [PATCH] toolchain: Add libatomic when using external toolchain   Helmut Schaa
• [OpenWrt-Devel] [PATCH] uboot-lantiq: fix P-2812HNU-F1/3 package dependency   Antti Seppälä
• [OpenWrt-Devel] [PATCH] uboot-lantiq: fix P-2812HNU-F1/3 package dependency   Sylwester Petela
• [OpenWrt-Devel] [PATCH] uboot-lantiq: fix P-2812HNU-F1/3 package dependency   Antti Seppälä
• [OpenWrt-Devel] [PATCH] uboot-lantiq: fix P-2812HNU-F1/3 package dependency   Ben Mulvihill
• [OpenWrt-Devel] [PATCH] uboot-lantiq: fix P-2812HNU-F1/3 package dependency   Daniel Schwierzeck
• [OpenWrt-Devel] [PATCH] uboot-lantiq: fix P-2812HNU-F1/3 package dependency   Ben Mulvihill
• [OpenWrt-Devel] [PATCH] uboot-lantiq: fix P-2812HNU-F1/3 package dependency   Daniel Schwierzeck
• [OpenWrt-Devel] [PATCH] uboot-sunxi: bump to 2015.01 release   Daniel Golle
• [OpenWrt-Devel] [PATCH] uboot-sunxi: bump to 2015.01 release   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH] util-linux: fix packaging issues   Gergely Kiss
• [OpenWrt-Devel] [PATCH] util-linux: fix packaging issues   Steven Barth
• [OpenWrt-Devel] [PATCH] video-core package fix for trunk   Ian Cass
• [OpenWrt-Devel] [PATCH fstools] libblkid-tiny: add btrfs probe info   Felix Fietkau
• [OpenWrt-Devel] [PATCH libubox 1/2] usock: add helper waiting for socket to be ready   Rafał Miłecki
• [OpenWrt-Devel] [PATCH libubox 1/2] usock: add helper waiting for socket to be ready   Felix Fietkau
• [OpenWrt-Devel] [PATCH libubox 2/2] usock: set socket flags right after creating it   Rafał Miłecki
• [OpenWrt-Devel] [PATCH libubox] uloop: ignore SIGPIPE by default   Rafał Miłecki
• [OpenWrt-Devel] [PATCH libubox] uloop: ignore SIGPIPE by default   Felix Fietkau
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   Matthias Schiffer
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   John Crispin
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   Matthias Schiffer
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   John Crispin
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   John Crispin
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   Matthias Schiffer
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   Matthias Schiffer
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   Matthias Schiffer
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   John Crispin
• [OpenWrt-Devel] [PATCH uclient] allow sending requests with DELETE method   Rafał Miłecki
• [OpenWrt-Devel] [PATCH uclient] allow sending requests with DELETE method   Felix Fietkau
• [OpenWrt-Devel] [PATCH uclient] http: wait for socket to be ready before using it   Rafał Miłecki
• [OpenWrt-Devel] [PATCH uclient] http: wait for socket to be ready before using it   Felix Fietkau
• [OpenWrt-Devel] [PATCH uclient] http: wait for socket to be ready before using it   Rafał Miłecki
• [OpenWrt-Devel] [PATCH uclient] support for connection timeout   Rafał Miłecki
• [OpenWrt-Devel] [PATCH uclient] support for connection timeout   Felix Fietkau
• [OpenWrt-Devel] [PATCH uclient] use const for char buffer in uclient_write   Rafał Miłecki
• [OpenWrt-Devel] [PATCH uclient] use const for char buffer in uclient_write   Felix Fietkau
• [OpenWrt-Devel] [PATCH uqmi] Add command for listing device capabilities   Sławomir Demeszko
• [OpenWrt-Devel] [PATCH uqmi] Add command for listing device capabilities   Felix Fietkau
• [OpenWrt-Devel] [PATCH uqmi] Add command to specify preferred PLMN   Sławomir Demeszko
• [OpenWrt-Devel] [PATCH uqmi] Add command to specify preferred PLMN   Felix Fietkau
• [OpenWrt-Devel] [PATCH uqmi] Add missing option for getting tdma signal strength   Sławomir Demeszko
• [OpenWrt-Devel] [PATCH uqmi] Add missing option for getting tdma signal strength   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2 1/3] iproute2: bump version to 3.18.0   Russell Senior
• [OpenWrt-Devel] [PATCH v2 1/3] iproute2: bump version to 3.18.0   Steven Barth
• [OpenWrt-Devel] [PATCH v2 2/2] dnsmasq: fix dependency problems of the dnsmasq-full variant.   Frank Schäfer
• [OpenWrt-Devel] [PATCH v2 2/2] dnsmasq: fix dependency problems of the dnsmasq-full variant.   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2 2/2] dnsmasq: fix dependency problems of the dnsmasq-full variant.   Frank Schäfer
• [OpenWrt-Devel] [PATCH v2 2/3] iproute2: fix header problem for musl   Russell Senior
• [OpenWrt-Devel] [PATCH v2 2/8] packages: uboot-sunxi: uEnv is used as a script rather than default env   Daniel Golle
• [OpenWrt-Devel] [PATCH v2 2/8] packages: uboot-sunxi: uEnv is used as a script rather than default env   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH v2 3/3] iproute2: add package for bridge program   Russell Senior
• [OpenWrt-Devel] [PATCH v2 7/8] sunxi: add support for Lamobo R1   Daniel Golle
• [OpenWrt-Devel] [PATCH v2 7/8] sunxi: add support for Lamobo R1   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH v2] [ar71xx] add support for TP-LINK TL-WA701ND v2   Luigi Tarenga
• [OpenWrt-Devel] [PATCH v2] [ar71xx] add support for TP-LINK TL-WA701ND v2   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2] [ar71xx] add support for TP-LINK TL-WA701ND v2   Luigi Tarenga
• [OpenWrt-Devel] [PATCH v2] [ar71xx] add support for TP-LINK TL-WA701ND v2   Luigi Tarenga
• [OpenWrt-Devel] [PATCH v2] Adding support for 6LoWPAN over Bluetooth Low Energy in kernel 3.18.   Duda, Lukasz
• [OpenWrt-Devel] [PATCH v2] Adding support for 6LoWPAN over Bluetooth Low Energy in kernel 3.18.   John Crispin
• [OpenWrt-Devel] [PATCH v2] build: allow openwrt.git packages to be replaced by feeds   Mathieu Olivari
• [OpenWrt-Devel] [PATCH v2] build: allow openwrt.git packages to be replaced by feeds   John Crispin
• [OpenWrt-Devel] [PATCH v2] build: allow openwrt.git packages to be replaced by feeds   John Crispin
• [OpenWrt-Devel] [PATCH v2] comgt: Allow using non-TTY devices   Matti Laakso
• [OpenWrt-Devel] [PATCH v2] mac80211: Add some missing 802.11n capabilities to hostapd configuration   Robert Hancock
• [OpenWrt-Devel] [PATCH v2] procd: delay inittab workers until the tty exists.   Owen Kirby
• [OpenWrt-Devel] [PATCH v2] procd: delay inittab workers until the tty exists.   John Crispin
• [OpenWrt-Devel] [PATCH v2] procd: delay inittab workers until the tty exists.   Owen Kirby
• [OpenWrt-Devel] [PATCH V2 libubox 1/2] usock: add helper waiting for socket to be ready   Rafał Miłecki
• [OpenWrt-Devel] [PATCH V2 libubox 1/2] usock: add helper waiting for socket to be ready   Felix Fietkau
• [OpenWrt-Devel] [PATCH V2 libubox] uloop: ignore SIGPIPE by default   Rafał Miłecki
• [OpenWrt-Devel] [PATCH V2 libubox] uloop: ignore SIGPIPE by default   Felix Fietkau
• [OpenWrt-Devel] [PATCH V2 uclient] support for connection timeout   Rafał Miłecki
• [OpenWrt-Devel] [PATCH V2 uclient] support for connection timeout   John Szakmeister
• [OpenWrt-Devel] [PATCH v2 uqmi] Add command for listing device capabilities   Sławomir Demeszko
• [OpenWrt-Devel] [PATCH v2 uqmi] Add command for listing device capabilities   Felix Fietkau
• [OpenWrt-Devel] [PATCH V3 1/5] brcm63xx: add basic-mmio-gpio DT support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH V3 2/5] brcm63xx: prefer DT GPIOs over legacy   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH V3 3/5] brcm63xx: backport DT spi-gpio no CS   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH V3 4/5] brcm63xx: refresh patches   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH V3 5/5] brcm63xx: register GPIOs through DT   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v3] Adding support for 6LoWPAN over Bluetooth Low Energy in kernel 3.18.   Duda, Lukasz
• [OpenWrt-Devel] [PATCH v3] Adding support for 6LoWPAN over Bluetooth Low Energy in kernel 3.18.   John Crispin
• [OpenWrt-Devel] [PATCH v3] add support for TL-WA701ND v2   Luigi Tarenga
• [OpenWrt-Devel] [PATCH v3] add support for TL-WA701ND v2   John Crispin
• [OpenWrt-Devel] [PATCH V3 libubox] uloop: ignore SIGPIPE by default   Rafał Miłecki
• [OpenWrt-Devel] [PATCH V3 uclient] support for connection timeout   Rafał Miłecki
• [OpenWrt-Devel] [PATCH V3 uclient] support for connection timeout   Felix Fietkau
• [OpenWrt-Devel] [PATCH v4] Adding support for 6LoWPAN over Bluetooth Low Energy in kernel 3.18.   Duda, Lukasz
• [OpenWrt-Devel] [PATCH v4] add support for TL-WA701ND v2   Luigi Tarenga
• [OpenWrt-Devel] [PATCH v4] add support for TL-WA701ND v2   John Crispin
• [OpenWrt-Devel] [ramips] Help supporting Xiaomi MiWiFi Mini (.dts file)   Roger Pueyo Centelles
• [OpenWrt-Devel] [ramips] Help supporting Xiaomi MiWiFi Mini (.dts file)   郭传鈜
• [OpenWrt-Devel] [ramips] Help supporting Xiaomi MiWiFi Mini (.dts file)   郭传鈜
• [OpenWrt-Devel] [ramips] Help supporting Xiaomi MiWiFi Mini (.dts file)   Roger Pueyo Centelles
• [OpenWrt-Devel] [RFC 0/7] Enhancement for kexec of MIPS kernel.   Yousong Zhou
• [OpenWrt-Devel] [RFC 1/7] kexec-tools: add patch for fixing kexec-tools' configure.ac.   Yousong Zhou
• [OpenWrt-Devel] [RFC 2/7] kexec-tools: add patch for fixing zlib/lzma decompression.   Yousong Zhou
• [OpenWrt-Devel] [RFC 3/7] kexec-tools: add patch for fixing compilation warnings.   Yousong Zhou
• [OpenWrt-Devel] [RFC 4/7] kexec-tools: remove unnecessary patch 0004-mips_regdefs.patch.   Yousong Zhou
• [OpenWrt-Devel] [RFC 5/7] kexec-tools: show up only when KERNEL_KEXEC is enabled.   Yousong Zhou
• [OpenWrt-Devel] [RFC 6/7] kexec-tools: add choice for selecting lzma support.   Yousong Zhou
• [OpenWrt-Devel] [RFC 7/7] mips/kexec: parse and use parameters specified by userspace kexec tool.   Yousong Zhou
• [OpenWrt-Devel] [RFC] [mvebu] WRT1900AC syscfg as overlay   mark milburn
• [OpenWrt-Devel] [RFC] [mvebu] WRT1900AC syscfg as overlay   Imre Kaloz
• [OpenWrt-Devel] [RFC] [mvebu] WRT1900AC syscfg as overlay   mark milburn
• [OpenWrt-Devel] [RFC PATCH 0/3] hostapd: add 802.11r support   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 1/3] hostapd: append nasid to config for all WPA types   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 2/3] hostapd: allow multiple key management algorithms   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 3/3] hostapd: add 802.11r support   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH] mac80211: brcmfmac: separate SDIO and USB support   Zoltan HERPAI
• [OpenWrt-Devel] [RFC PATCH] mac80211: brcmfmac: separate SDIO and USB support   José Vázquez
• [OpenWrt-Devel] [RFC PATCH] mac80211: brcmfmac: separate SDIO and USB support   Zoltan HERPAI
• [OpenWrt-Devel] Announcement of mac80211 driver support for Marvell 88W8864 chip   mark milburn
• [OpenWrt-Devel] Announcement of mac80211 driver support for Marvell 88W8864 chip   David Lin
• [OpenWrt-Devel] Announcement of mac80211 driver support for Marvell 88W8864 chip   Ian Kent
• [OpenWrt-Devel] Announcement of mac80211 driver support for Marvell 88W8864 chip   David Lin
• [OpenWrt-Devel] Announcement of mac80211 driver support for Marvell 88W8864 chip   Ian Kent
• [OpenWrt-Devel] Announcement of mac80211 driver support for Marvell 88W8864 chip   Ian Kent
• [OpenWrt-Devel] Announcement of mac80211 driver support for Marvell 88W8864 chip   David Lin
• [OpenWrt-Devel] Anyone familiar with RouterBoot? Trying to port board.   David Hutchison
• [OpenWrt-Devel] Anyone familiar with RouterBoot? Trying to port board.   Soren Harward
• [OpenWrt-Devel] Anyone familiar with RouterBoot? Trying to port board.   David Hutchison
• [OpenWrt-Devel] ar8216: phy_init and bug report 18415   Weedy
• [OpenWrt-Devel] ar8216: phy_init and bug report 18415   Heiner Kallweit
• [OpenWrt-Devel] ar8216: phy_init and bug report 18415   Weedy
• [OpenWrt-Devel] ar8216: phy_init and bug report 18415   Heiner Kallweit
• [OpenWrt-Devel] ar8216: phy_init and bug report 18415   Weedy
• [OpenWrt-Devel] Archer C7, leds and led trigger for ath10k   Gianluca Anzolin
• [OpenWrt-Devel] Archer C7, leds and led trigger for ath10k   John Crispin
• [OpenWrt-Devel] Archer C7, leds and led trigger for ath10k   Gianluca Anzolin
• [OpenWrt-Devel] Archer C7, leds and led trigger for ath10k   John Crispin
• [OpenWrt-Devel] Archer C7, leds and led trigger for ath10k   Gianluca Anzolin
• [OpenWrt-Devel] Archer C7, leds and led trigger for ath10k   John Crispin
• [OpenWrt-Devel] barrier breaker 14.07 stable release location   Madhu koriginja
• [OpenWrt-Devel] barrier breaker 14.07 stable release location   Claudio Thomas
• [OpenWrt-Devel] Buildbot "exception master shell command" (& broken packages not up to date)   Etienne Champetier
• [OpenWrt-Devel] cmake.mk: ignores package CFLAGS   Rafał Miłecki
• [OpenWrt-Devel] Codenames dark and dirty ?!   phadros
• [OpenWrt-Devel] Compex WPJ558 board support   Christian Mehlis
• [OpenWrt-Devel] Compex WPJ558 board support   SGT. Garcia
• [OpenWrt-Devel] Compex WPJ558 board support   Christian Mehlis
• [OpenWrt-Devel] cURL: implement new functionality with cleanup and fixes   Christian Schoenebeck
• [OpenWrt-Devel] cURL: Update to version 7.40.0   Christian Schoenebeck
• [OpenWrt-Devel] ddns-scripts "sleep 10" before updating?   Catalin Patulea
• [OpenWrt-Devel] ddns-scripts "sleep 10" before updating?   Christian Schoenebeck
• [OpenWrt-Devel] ddns-scripts "sleep 10" before updating?   Catalin Patulea
• [OpenWrt-Devel] ddns-scripts "sleep 10" before updating?   Christian Schoenebeck
• [OpenWrt-Devel] ddns-scripts "sleep 10" before updating?   Catalin Patulea
• [OpenWrt-Devel] ddns-scripts "sleep 10" before updating?   Christian Schoenebeck
• [OpenWrt-Devel] ddns-scripts "sleep 10" before updating?   Catalin Patulea
• [OpenWrt-Devel] ddns-scripts "sleep 10" before updating?   Christian Schoenebeck
• [OpenWrt-Devel] ddns-scripts "sleep 10" before updating?   SGT. Garcia
• [OpenWrt-Devel] ddns-scripts 2.0.1-1 breaks freedns.afraid.org?   Catalin Patulea
• [OpenWrt-Devel] ddns-scripts 2.0.1-1 breaks freedns.afraid.org?   Jo-Philipp Wich
• [OpenWrt-Devel] ddns-scripts 2.0.1-1 breaks freedns.afraid.org?   Christian Schoenebeck
• [OpenWrt-Devel] ddns-scripts 2.0.1-1 breaks freedns.afraid.org?   Catalin Patulea
• [OpenWrt-Devel] ddns-scripts 2.0.1-1 breaks freedns.afraid.org?   Christian Schoenebeck
• [OpenWrt-Devel] Default OPKG Configuration for ramips.mt7620   Gottfried Haider
• [OpenWrt-Devel] Default OPKG Configuration for ramips.mt7620   Bastian Bittorf
• [OpenWrt-Devel] Dual Wifi for OpenWRT   Bruno Randolf
• [OpenWrt-Devel] Dual Wifi for OpenWRT   Aaron Z
• [OpenWrt-Devel] Dual Wifi for OpenWRT   Bastian Bittorf
• [OpenWrt-Devel] Dual Wifi for OpenWRT   David Lang
• [OpenWrt-Devel] Dual Wifi for OpenWRT   Bruno Randolf
• [OpenWrt-Devel] Dual Wifi for OpenWRT   David Lang
• [OpenWrt-Devel] fstools / always fires 'uci commit' each reboot   Bastian Bittorf
• [OpenWrt-Devel] fstools / always fires 'uci commit' each reboot   Lars Kruse
• [OpenWrt-Devel] fstools / always fires 'uci commit' each reboot   Bastian Bittorf
• [OpenWrt-Devel] fstools / always fires 'uci commit' each reboot   Peter Lawler
• [OpenWrt-Devel] Fwd: MIPS libatomic   Santiago Regusci
• [OpenWrt-Devel] Fwd: MIPS libatomic   Alexandru Ardelean
• [OpenWrt-Devel] Fwd: MIPS libatomic   Santiago Regusci
• [OpenWrt-Devel] Fwd: MIPS libatomic   Dirk Neukirchen
• [OpenWrt-Devel] hardened openwrt & luci   Etienne Champetier
• [OpenWrt-Devel] hardened openwrt & luci   Jo-Philipp Wich
• [OpenWrt-Devel] Hardlock in ath9k   Gianluca Anzolin
• [OpenWrt-Devel] Hardlock in ath9k   Felix Fietkau
• [OpenWrt-Devel] Hardlock in ath9k   Gianluca Anzolin
• [OpenWrt-Devel] Hardlock in ath9k   Felix Fietkau
• [OpenWrt-Devel] Hardlock in ath9k   Gianluca Anzolin
• [OpenWrt-Devel] Hardlock in ath9k   Sergey Ryazanov
• [OpenWrt-Devel] hostapd disconnects with Apple devices.   Mikko Hissa
• [OpenWrt-Devel] How to acces init mtd partition on RB2011-UiAS   Matt Lee
• [OpenWrt-Devel] How To Create a Package Tutorial   Eric Schultz
• [OpenWrt-Devel] How to enable EARLY_PRINTK by default on ARM target?   Rafał Miłecki
• [OpenWrt-Devel] How to enable EARLY_PRINTK by default on ARM target?   Florian Fainelli
• [OpenWrt-Devel] How to enable EARLY_PRINTK by default on ARM target?   Rafał Miłecki
• [OpenWrt-Devel] How to handle multiple providers?   Mats Karrman
• [OpenWrt-Devel] How to handle multiple providers?   Alexandru Ardelean
• [OpenWrt-Devel] How to handle multiple providers?   Mats Karrman
• [OpenWrt-Devel] How to handle multiple providers?   Alexandru Ardelean
• [OpenWrt-Devel] How to install OpenWrt on Mikrotik SXT Lite 5?   Bráulio Bhavamitra
• [OpenWrt-Devel] How to install OpenWrt on Mikrotik SXT Lite 5?   Bráulio Bhavamitra
• [OpenWrt-Devel] Hyper-V Support for X86 or X86_64   Ning Ye
• [OpenWrt-Devel] imagebuilder "no valid architecture" and "incompatible with the architectures" errors   valent.turkovic at gmail.com
• [OpenWrt-Devel] imagebuilder "no valid architecture" and "incompatible with the architectures" errors   valent.turkovic at gmail.com
• [OpenWrt-Devel] info about distance optimization   zhang zhao
• [OpenWrt-Devel] Install .pc files of Python   Szilárd Pfeiffer
• [OpenWrt-Devel] Install .pc files of Python   Felix Fietkau
• [OpenWrt-Devel] Install .pc files of Python   Alexandru Ardelean
• [OpenWrt-Devel] Introducing "fastpath" - Kernel module for speeding up IP forwarding   Weedy
• [OpenWrt-Devel] Is Linksys/Belkin lying (again) about being open source (WRT1200AC router) ?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Is Linksys/Belkin lying (again) about being open source (WRT1200AC router) ?   Imre Kaloz
• [OpenWrt-Devel] Is Linksys/Belkin lying (again) about being open source (WRT1200AC router) ?   Fernando Frediani
• [OpenWrt-Devel] Is Linksys/Belkin lying (again) about being open source (WRT1200AC router) ?   David Lang
• [OpenWrt-Devel] Is Linksys/Belkin lying (again) about being open source (WRT1200AC router) ?   Bjørn Mork
• [OpenWrt-Devel] Is Linksys/Belkin lying (again) about being open source (WRT1200AC router) ?   Jacek Kikiewicz
• [OpenWrt-Devel] Is Linksys/Belkin lying (again) about being open source (WRT1200AC router) ?   Bjørn Mork
• [OpenWrt-Devel] issue: usb1.x not detected in CC   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] issue: usb1.x not detected in CC   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] JSON data interchange format for networks   Nemesis
• [OpenWrt-Devel] libcurl: questing about configure/build options   Christian Schoenebeck
• [OpenWrt-Devel] Modifying configuration at package install   Eric Schultz
• [OpenWrt-Devel] Modifying configuration at package install   Matthias Strubel
• [OpenWrt-Devel] Modifying configuration at package install   Eric Schultz
• [OpenWrt-Devel] Modifying configuration at package install   Jo-Philipp Wich
• [OpenWrt-Devel] MT7688 -- is anyone working on this already?   Marc Nicholas
• [OpenWrt-Devel] MT7688 -- is anyone working on this already?   John Crispin
• [OpenWrt-Devel] netifd + split dns servers   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] netifd + split dns servers   Hans Dedecker
• [OpenWrt-Devel] netifd + split dns servers   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] netifd + split dns servers   Steven Barth
• [OpenWrt-Devel] netifd + split dns servers   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] network/znc: Package binaries appear to be broken by MIPS16   Oliver
• [OpenWrt-Devel] network/znc: Package binaries appear to be broken by MIPS16   Sławomir Demeszko
• [OpenWrt-Devel] network/znc: Package binaries appear to be broken by MIPS16   Sławomir Demeszko
• [OpenWrt-Devel] network/znc: Package binaries appear to be broken by MIPS16   Karl Vogel
• [OpenWrt-Devel] openconnect does not remove default routes [was: Some OpenConnect observations]   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] openconnect does not remove default routes [was: Some OpenConnect observations]   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] openconnect does not remove default routes [was: Some OpenConnect observations]   Gottfried Haider
• [OpenWrt-Devel] OpenWRT SDK and autotools + EclipseCDT development.   Carlos Ferreira
• [OpenWrt-Devel] OpenWRT Wiki License   Riley Baird
• [OpenWrt-Devel] p2812hnu-f1   Michaël Zweers
• [OpenWrt-Devel] p2812hnu-f1   Sylwester Petela
• [OpenWrt-Devel] pivot_overlay doesn't work anymore   Gianluca Anzolin
• [OpenWrt-Devel] pivot_overlay doesn't work anymore   Rafał Miłecki
• [OpenWrt-Devel] pivot_overlay doesn't work anymore   Gianluca Anzolin
• [OpenWrt-Devel] Plans for procd   Mats Karrman
• [OpenWrt-Devel] Plans for procd   Mats Karrman
• [OpenWrt-Devel] Plans for procd   Karl Palsson
• [OpenWrt-Devel] Port for Edimax BR-6435ND (RALink 3352F)   geotti
• [OpenWrt-Devel] Porting Intel DPDK to openwrt?   Shankar Unni
• [OpenWrt-Devel] procd/inittab with a delayed console   Owen Kirby
• [OpenWrt-Devel] procd/inittab with a delayed console   Stam, Michel [FINT]
• [OpenWrt-Devel] procd/inittab with a delayed console   Karl Palsson
• [OpenWrt-Devel] procd/inittab with a delayed console   Michael Heimpold
• [OpenWrt-Devel] procd/inittab with a delayed console   Owen Kirby
• [OpenWrt-Devel] procd/inittab with a delayed console   Owen Kirby
• [OpenWrt-Devel] procd button handling   beeronice
• [OpenWrt-Devel] procd button handling   John Crispin
• [OpenWrt-Devel] procd limits usage   Karl Palsson
• [OpenWrt-Devel] procd limits usage   Yousong Zhou
• [OpenWrt-Devel] procd limits usage   Karl Palsson
• [OpenWrt-Devel] procd limits usage   Yousong Zhou
• [OpenWrt-Devel] procd limits usage   Karl Palsson
• [OpenWrt-Devel] Proposal: change buildbot's build failure logic to be less restrictive regarding packages from feeds   Hannu Nyman
• [OpenWrt-Devel] Q: autoupload a configuration file   Bastian Bittorf
• [OpenWrt-Devel] QEMU 2.0.0   Ning Ye
• [OpenWrt-Devel] QEMU 2.0.0   Florian Fainelli
• [OpenWrt-Devel] QEMU 2.0.0   Ning Ye
• [OpenWrt-Devel] question about ath9k endianness check in eeprom_9287.c   Ben Mulvihill
• [OpenWrt-Devel] question about ath9k endianness check in eeprom_9287.c   Felix Fietkau
• [OpenWrt-Devel] RouterBOARD CRS125-24G-1S   Charlie Smurthwaite
• [OpenWrt-Devel] RouterBOARD CRS125-24G-1S   . Garcia
• [OpenWrt-Devel] setting up ocserv VPN interactions with lan   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] Status of new standard ETSI EN 300 328 (ralink)   Michael Heimpold
• [OpenWrt-Devel] Status of NFSv4   W. Michael Petullo
• [OpenWrt-Devel] Strange LED behavior on ramips   Vittorio G (VittGam)
• [OpenWrt-Devel] Ubiquiti XW builds   Ken Buska
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Ben Mulvihill
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Conor O'Gorman
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Daniel Schwierzeck
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Ben Mulvihill
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Ben Mulvihill
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Daniel Schwierzeck
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Ben Mulvihill
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Ben Mulvihill
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Ben Mulvihill
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Daniel Schwierzeck
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Ben Mulvihill
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Daniel Schwierzeck
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   John Crispin
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Ben Mulvihill
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Daniel Schwierzeck
• [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image   Ben Mulvihill
• [OpenWrt-Devel] ubus document   Yang Haixiang
• [OpenWrt-Devel] uclient & libubox: handling SIGPIPE / EPIPE   Rafał Miłecki
• [OpenWrt-Devel] uclient & libubox: handling SIGPIPE / EPIPE   John Crispin
• [OpenWrt-Devel] UDAP-Protocol Broadcast-Handling with Relayd   Dierk Modrow
• [OpenWrt-Devel] Wiki upload rights   valent.turkovic at gmail.com
• [OpenWrt-Devel] Wiki upload rights   valent.turkovic at gmail.com
• [OpenWrt-Devel] Wiki upload rights   valent.turkovic at gmail.com
• [OpenWrt-Devel] Wiki upload rights   valent.turkovic at gmail.com
• [OpenWrt-Devel] Wiki upload rights   Jo-Philipp Wich
• [OpenWrt-Devel] Wrong Network Configuration File Fails Everything   Yilun Zhou
• [OpenWrt-Devel] Wrong Network Configuration File Fails Everything   Sami Olmari
• [OpenWrt-Devel] WRT1900AC - Available firmwares ?   Fernando Frediani
• [OpenWrt-Devel] WRT1900AC - Available firmwares ?   Imre Kaloz
• [OpenWrt-Devel] WRT1900AC - Available firmwares ?   Fernando Frediani
• [OpenWrt-Devel] WRT1900AC - Available firmwares ?   Imre Kaloz
• [OpenWrt-Devel] WRT1900AC - Available firmwares ?   Ian Kent
• [OpenWrt-Devel] Xilinx Zynq zedboard integration   Javier Domingo Cansino
• [OpenWrt-Devel] Xilinx Zynq zedboard integration   Javier Domingo Cansino
• [PATCH] ath10k: add throughput led trigger   Gianluca Anzolin
• [PATCH] kernel: add support for NFSv4   W. Michael Petullo
• [PATCH] util-linux: fix packaging issues   Gergely Kiss

Last message date: Sat Jan 31 09:00:47 EST 2015
Archived on: Thu Jun 25 05:56:06 EDT 2020

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...