November 2015 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Nov 2 00:46:02 PST 2015
Ending: Mon Nov 30 15:51:56 PST 2015
Messages: 128

• [PATCH 1/2] clk: bcm2835: Support for clock parent selection   Eric Anholt
• [PATCH 2/2] clk: bcm2835: Add PWM clock support   Eric Anholt
• [PATCH 1/2] clk: bcm2835: Support for clock parent selection   Eric Anholt
• [PATCH 0/4 V2 RESEND] usb: dwc2: fix usb host support on Raspberry Pi   Eric Anholt
• [RFC] rpi: add support to enable usb power domain   Eric Anholt
• [PATCH v2 1/3] clk: bcm2835: Always round up clock divisor   Eric Anholt
• [PATCH v2 2/3] clk: bcm2835: Support for clock parent selection   Eric Anholt
• [PATCH v2 3/3] clk: bcm2835: Add PWM clock support   Eric Anholt
• [PATCH] dmaengine: bcm2835-dma: Convert to use DMA pool   Eric Anholt
• [PATCH 2/3] ARM: bcm2835: add rpi power domain driver   Eric Anholt
• [PATCH 2/3] ARM: bcm2835: add rpi power domain driver   Eric Anholt
• [PATCH] pinctrl: bcm2835: Fix initial value for direction_output   Eric Anholt
• [PATCHv2 4/4] ARM: bcm2835: update rpi devicetree entries   Eric Anholt
• [PATCHv2 3/4] devicetree: add rpi power domain driver bindings   Eric Anholt
• [PATCHv2 2/4] ARM: bcm2835: add rpi power domain driver   Eric Anholt
• [RFC] rpi: add support to enable usb power domain   Alexander Aring
• [RFC] rpi: add support to enable usb power domain   Alexander Aring
• [RFCv2 0/2] rpi: add support for rpi power domain driver   Alexander Aring
• [RFCv2 1/2] power: domain: add pm_genpd_uninit   Alexander Aring
• [RFCv2 2/2] rpi: add support to enable usb power domain   Alexander Aring
• [RFCv2 2/2] rpi: add support to enable usb power domain   Alexander Aring
• [RFCv2 2/2] rpi: add support to enable usb power domain   Alexander Aring
• [RFCv2 1/2] power: domain: add pm_genpd_uninit   Alexander Aring
• usb: dwc2: regression during boot on Raspberry Pi   Alexander Aring
• [RFCv2 1/2] power: domain: add pm_genpd_uninit   Alexander Aring
• [RFCv2 2/2] rpi: add support to enable usb power domain   Alexander Aring
• [RFCv2 1/2] power: domain: add pm_genpd_uninit   Alexander Aring
• [PATCH 0/3] ARM: bcm2835: add support for rpi power domain driver   Alexander Aring
• [PATCH 1/3] power: domain: add pm_genpd_uninit   Alexander Aring
• [PATCH 2/3] ARM: bcm2835: add rpi power domain driver   Alexander Aring
• [PATCH 3/3] devicetree: add rpi power domain driver bindings   Alexander Aring
• [PATCH 2/3] ARM: bcm2835: add rpi power domain driver   Alexander Aring
• [PATCHv2 0/4] ARM: bcm2835: add support for rpi power domain driver   Alexander Aring
• [PATCHv2 1/4] power: domain: add pm_genpd_exit   Alexander Aring
• [PATCHv2 2/4] ARM: bcm2835: add rpi power domain driver   Alexander Aring
• [PATCHv2 3/4] devicetree: add rpi power domain driver bindings   Alexander Aring
• [PATCHv2 4/4] ARM: bcm2835: update rpi devicetree entries   Alexander Aring
• [PATCH RESEND 1/2] usb: dwc2: Make PHY optional   Felipe Balbi
• [PATCH RESEND 1/2] usb: dwc2: Make PHY optional   Felipe Balbi
• [PATCH RESEND 1/2] usb: dwc2: Make PHY optional   Felipe Balbi
• [PATCH RESEND 1/2] usb: dwc2: Make PHY optional   Felipe Balbi
• [RFCv2 1/2] power: domain: add pm_genpd_uninit   Ulf Hansson
• [RFCv2 1/2] power: domain: add pm_genpd_uninit   Ulf Hansson
• [RFCv2 1/2] power: domain: add pm_genpd_uninit   Ulf Hansson
• [PATCH 1/3] power: domain: add pm_genpd_uninit   Ulf Hansson
• [PATCH 2/3] ARM: bcm2835: add rpi power domain driver   Ulf Hansson
• [PATCHv2 1/4] power: domain: add pm_genpd_exit   Ulf Hansson
• [RFCv2 2/2] rpi: add support to enable usb power domain   Rob Herring
• [PATCH 3/3] devicetree: add rpi power domain driver bindings   Rob Herring
• [PATCH 1/3] power: domain: add pm_genpd_uninit   Kevin Hilman
• [PATCH 2/3] ARM: bcm2835: add rpi power domain driver   Kevin Hilman
• [PATCH 0/2] Add PWM clock support for bcm2835   Remi Pommarel
• [PATCH 1/2] clk: bcm2835: Support for clock parent selection   Remi Pommarel
• [PATCH 2/2] clk: bcm2835: Add PWM clock support   Remi Pommarel
• [PATCH v2 0/3] Add PWM clock support for bcm2835   Remi Pommarel
• [PATCH v2 1/3] clk: bcm2835: Always round up clock divisor   Remi Pommarel
• [PATCH v2 2/3] clk: bcm2835: Support for clock parent selection   Remi Pommarel
• [PATCH v2 3/3] clk: bcm2835: Add PWM clock support   Remi Pommarel
• [PATCH v2 1/3] clk: bcm2835: Always round up clock divisor   Remi Pommarel
• [PATCH v2 2/3] clk: bcm2835: Support for clock parent selection   Remi Pommarel
• [PATCH v2 3/3] clk: bcm2835: Add PWM clock support   Remi Pommarel
• [PATCH v2 0/3] Add PWM clock support for bcm2835   Remi Pommarel
• [PATCH v2 0/3] Add PWM clock support for bcm2835   Remi Pommarel
• [PATCH v2 1/5] i2c: add i2c quirk flag for unsupported clock stretching   Wolfram Sang
• [PATCH v2 2/5] i2c: add I2C_AQ_NO_CLK_STRETCH to i2c-algo-bit.c   Wolfram Sang
• [PATCH v2 3/5] i2c: add I2C_AQ_NO_CLK_STRETCH to i2c-bcm2835.c   Wolfram Sang
• [PATCH 4/5] i2c: add i2c_check_quirks helper function   Wolfram Sang
• [PATCH 4/5] i2c: add i2c_check_quirks helper function   Wolfram Sang
• [PATCH v5 5/5] iio: humidity: si7020: add No Hold read mode   Wolfram Sang
• [PATCH RESEND 2/2] usb: dwc2: Return errors from PHY   Sergei Shtylyov
• [PATCH 2/4 V2] usb: dwc2: Make PHY optional   Sergei Shtylyov
• usb: dwc2: regression during boot on Raspberry Pi   Marek Szyprowski
• [PATCH 0/4 V2] usb: dwc2: fix usb host support on Raspberry Pi   Marek Szyprowski
• [PATCH] dmaengine: bcm2835-dma: Convert to use DMA pool   Peter Ujfalusi
• [PATCH] dmaengine: bcm2835-dma: Convert to use DMA pool   Peter Ujfalusi
• [PATCH] dmaengine: bcm2835-dma: Convert to use DMA pool   Peter Ujfalusi
• [RFCv2 2/2] rpi: add support to enable usb power domain   Stefan Wahren
• usb: dwc2: regression during boot on Raspberry Pi   Stefan Wahren
• usb: dwc2: regression during boot on Raspberry Pi   Stefan Wahren
• usb: dwc2: regression during boot on Raspberry Pi   Stefan Wahren
• usb: dwc2: regression during boot on Raspberry Pi   Stefan Wahren
• usb: dwc2: regression during boot on Raspberry Pi   Stefan Wahren
• usb: dwc2: regression during boot on Raspberry Pi   Stefan Wahren
• [PATCH 0/4 V2] usb: dwc2: fix usb host support on Raspberry Pi   Stefan Wahren
• [PATCH 1/4 V2] usb: dwc2: fix kernel oops during driver probe   Stefan Wahren
• [PATCH 2/4 V2] usb: dwc2: Make PHY optional   Stefan Wahren
• [PATCH 3/4 V2] usb: dwc2: Return errors from PHY   Stefan Wahren
• [PATCH 4/4 V2] usb: dwc2: make otg clk optional   Stefan Wahren
• [PATCH 2/4 V2] usb: dwc2: Make PHY optional   Stefan Wahren
• [PATCH 0/4 V2 RESEND] usb: dwc2: fix usb host support on Raspberry Pi   Stefan Wahren
• [PATCH 1/4 V2 RESEND] usb: dwc2: fix kernel oops during driver probe   Stefan Wahren
• [PATCH 2/4 V2 RESEND] usb: dwc2: Make PHY optional   Stefan Wahren
• [PATCH 3/4 V2 RESEND] usb: dwc2: Return errors from PHY   Stefan Wahren
• [PATCH 4/4 V2 RESEND] usb: dwc2: make otg clk optional   Stefan Wahren
• bcm2835_gpio_direction_output not setting up GPIO value   Stefan Wahren
• [PATCH] dmaengine: bcm2835-dma: Convert to use DMA pool   Stefan Wahren
• [PATCH] pinctrl: bcm2835: Fix initial value for direction_output   Stefan Wahren
• [PATCH RFC 0/4] ARM: bcm2835: assign pins to sdhci pinctrl   Stefan Wahren
• [PATCH RFC 1/4] ARM: bcm2835: remove sdhci pins from GPIO pinctrl   Stefan Wahren
• [PATCH RFC 2/4] ARM: bcm2835: rename sdhci pin group   Stefan Wahren
• [PATCH RFC 3/4] ARM: bcm2835: specify card detect pin for RPi B   Stefan Wahren
• [PATCH RFC 4/4] ARM: bcm2835: assign pins to sdhci pinctrl   Stefan Wahren
• [PATCH V3 RFT] ARM: bcm2835: enable all bcm2835-relevant in defconfig   Stefan Wahren
• [PATCH RESEND 1/2] usb: dwc2: Make PHY optional   Stefan Wahren
• [PATCH RESEND 1/2] usb: dwc2: Make PHY optional   Stefan Wahren
• [PATCH RESEND 1/2] usb: dwc2: Make PHY optional   Stefan Wahren
• [PATCH] dmaengine: bcm2835-dma: Convert to use DMA pool   Stefan Wahren
• [PATCH 2/2] clk: bcm2835: Add PWM clock support   Stefan Wahren
• [PATCH v2 0/3] Add PWM clock support for bcm2835   Stefan Wahren
• [PATCH v2 0/3] Add PWM clock support for bcm2835   Stefan Wahren
• [PATCH] pinctrl: bcm2835: Fix initial value for direction_output   Linus Walleij
• usb: dwc2: regression during boot on Raspberry Pi   Stephen Warren
• usb: dwc2: regression during boot on Raspberry Pi   John Youn
• usb: dwc2: regression during boot on Raspberry Pi   John Youn
• No subject   John Youn
• [PATCH 1/2] usb: dwc2: Make PHY optional   John Youn
• [PATCH 2/2] usb: dwc2: Return errors from PHY   John Youn
• [PATCH RESEND 0/2] usb: dwc2: Fix issues with getting PHY during probe   John Youn
• [PATCH RESEND 1/2] usb: dwc2: Make PHY optional   John Youn
• [PATCH RESEND 2/2] usb: dwc2: Return errors from PHY   John Youn
• usb: dwc2: regression during boot on Raspberry Pi   John Youn
• usb: dwc2: regression during boot on Raspberry Pi   John Youn
• usb: dwc2: regression during boot on Raspberry Pi   John Youn
• [PATCH 0/4 V2] usb: dwc2: fix usb host support on Raspberry Pi   John Youn
• [PATCH 0/3] spi: spi-message transformation framework   kernel at martin.sperl.org
• [PATCH 1/3] spi: added spi_resource management   kernel at martin.sperl.org
• [PATCH 2/3] spi: add initial set of spi_transfer transformation methods   kernel at martin.sperl.org
• [PATCH 3/3] spi: bcm2835: moved to the spi_transfer transformation to avoid HW restrictions   kernel at martin.sperl.org

Last message date: Mon Nov 30 15:51:56 PST 2015
Archived on: Tue Dec 1 04:21:57 PST 2015

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...