August 2024 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Aug 1 00:19:44 PDT 2024
Ending: Thu Aug 29 14:14:08 PDT 2024
Messages: 178

• [PATCH v1 1/2] dt-bindings: i3c: Add NPCM845 i3c controller   Alexandre Belloni
• [PATCH RESEND v3 1/6] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   Alexandre Belloni
• [PATCH 1/1] MAINTAINERS: I3C: Add Frank Li as nxp I3C controller driver maintainer   Alexandre Belloni
• [PATCH v2 10/11] i3c: master: svc: wait for Manual ACK/NACK Done before next step   Dan Carpenter
• [PATCH -next] i3c: master: cdns: fix module autoloading   Liao Chen
• [PATCH v1 0/2] Add Nuvoton NPCM845 i3c master driver   Stanley Chu
• [PATCH v1 1/2] dt-bindings: i3c: Add NPCM845 i3c controller   Stanley Chu
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Stanley Chu
• [PATCH v1 1/2] dt-bindings: i3c: Add NPCM845 i3c controller   Stanley Chu
• [PATCH v1 1/2] dt-bindings: i3c: Add NPCM845 i3c controller   Stanley Chu
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Stanley Chu
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Stanley Chu
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Stanley Chu
• [PATCH v3 01/11] i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin   Stanley Chu
• [PATCH 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Markus Elfring
• [PATCH 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Markus Elfring
• [PATCH v2 2/5] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH v3 0/5] Introduce initial AMD I3C HCI driver support   Shyam Sundar S K
• [PATCH v3 1/5] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH v3 2/5] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH v3 3/5] i3c: mipi-i3c-hci: Relocate helper macros to HCI header file   Shyam Sundar S K
• [PATCH v3 4/5] i3c: mipi-i3c-hci: Add a quirk to set timing parameters   Shyam Sundar S K
• [PATCH v3 5/5] i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold   Shyam Sundar S K
• [PATCH v3 2/5] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH RESEND v3 0/6] Introduce initial AMD I3C HCI driver support   Shyam Sundar S K
• [PATCH RESEND v3 1/6] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH RESEND v3 2/6] i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1   Shyam Sundar S K
• [PATCH RESEND v3 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH RESEND v3 4/6] i3c: mipi-i3c-hci: Relocate helper macros to HCI header file   Shyam Sundar S K
• [PATCH RESEND v3 5/6] i3c: mipi-i3c-hci: Add a quirk to set timing parameters   Shyam Sundar S K
• [PATCH RESEND v3 6/6] i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold   Shyam Sundar S K
• [PATCH RESEND v3 1/6] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH RESEND v3 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH RESEND v3 2/6] i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1   Shyam Sundar S K
• [PATCH RESEND v3 1/6] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH RESEND v3 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH RESEND v3 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH RESEND v3 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH v4 0/6] Introduce initial AMD I3C HCI driver support   Shyam Sundar S K
• [PATCH v4 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH v4 2/6] i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1   Shyam Sundar S K
• [PATCH v4 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH v4 4/6] i3c: mipi-i3c-hci: Relocate helper macros to HCI header file   Shyam Sundar S K
• [PATCH v4 5/6] i3c: mipi-i3c-hci: Add a quirk to set timing parameters   Shyam Sundar S K
• [PATCH v4 6/6] i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold   Shyam Sundar S K
• [PATCH v4 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH v4 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH v4 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH v4 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH v5 0/6] Introduce initial AMD I3C HCI driver support   Shyam Sundar S K
• [PATCH v5 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH v5 2/6] i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1   Shyam Sundar S K
• [PATCH v5 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH v5 4/6] i3c: mipi-i3c-hci: Relocate helper macros to HCI header file   Shyam Sundar S K
• [PATCH v5 5/6] i3c: mipi-i3c-hci: Add a quirk to set timing parameters   Shyam Sundar S K
• [PATCH v5 6/6] i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold   Shyam Sundar S K
• [PATCH v6 0/6] Introduce initial AMD I3C HCI driver support   Shyam Sundar S K
• [PATCH v6 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Shyam Sundar S K
• [PATCH v6 2/6] i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1   Shyam Sundar S K
• [PATCH v6 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Shyam Sundar S K
• [PATCH v6 4/6] i3c: mipi-i3c-hci: Relocate helper macros to HCI header file   Shyam Sundar S K
• [PATCH v6 5/6] i3c: mipi-i3c-hci: Add a quirk to set timing parameters   Shyam Sundar S K
• [PATCH v6 6/6] i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold   Shyam Sundar S K
• [PATCH v1 1/2] dt-bindings: i3c: Add NPCM845 i3c controller   Krzysztof Kozlowski
• [PATCH v1 1/2] dt-bindings: i3c: Add NPCM845 i3c controller   Krzysztof Kozlowski
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Krzysztof Kozlowski
• [PATCH 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Krzysztof Kozlowski
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Frank Li
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Frank Li
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   Frank Li
• [PATCH 1/2] i3c: master: support to adjust first broadcast address speed   Frank Li
• [PATCH 2/2] i3c: master: svc: use slow speed for first broadcast address   Frank Li
• [PATCH v2 00/11] i3c: master: some fix and improvemnt for hotjoin   Frank Li
• [PATCH v2 01/11] i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin   Frank Li
• [PATCH v2 02/11] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_BITS   Frank Li
• [PATCH v2 03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT   Frank Li
• [PATCH v2 04/11] i3c: master: Fix dynamic address leak when 'assigned-address' is present   Frank Li
• [PATCH v2 05/11] i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()   Frank Li
• [PATCH v2 06/11] i3c: master: svc: use repeat start when IBI WIN happens   Frank Li
• [PATCH v2 07/11] i3c: master: svc: manually emit NACK/ACK for hotjoin   Frank Li
• [PATCH v2 08/11] i3c: master: svc: need check IBIWON for dynamtica address assign   Frank Li
• [PATCH v2 09/11] i3c: master: svc: use spinlock_saveirq at svc_i3c_master_ibi_work()   Frank Li
• [PATCH v2 10/11] i3c: master: svc: wait for Manual ACK/NACK Done before next step   Frank Li
• [PATCH v2 11/11] i3c: master: svc: fix possible assignment of the same address to two devices   Frank Li
• [PATCH 1/1] MAINTAINERS: I3C: Add Frank Li as nxp I3C controller driver maintainer   Frank Li
• [PATCH v2 1/1] MAINTAINERS: I3C: Add Frank Li as nxp I3C controller driver maintainer   Frank Li
• [PATCH v3 00/11] i3c: master: some fix and improvemnt for hotjoin   Frank Li
• [PATCH v3 01/11] i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin   Frank Li
• [PATCH v3 02/11] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_BITS   Frank Li
• [PATCH v3 03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT   Frank Li
• [PATCH v3 04/11] i3c: master: Fix dynamic address leak when 'assigned-address' is present   Frank Li
• [PATCH v3 05/11] i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()   Frank Li
• [PATCH v3 06/11] i3c: master: svc: use repeat start when IBI WIN happens   Frank Li
• [PATCH v3 07/11] i3c: master: svc: manually emit NACK/ACK for hotjoin   Frank Li
• [PATCH v3 08/11] i3c: master: svc: need check IBIWON for dynamtica address assign   Frank Li
• [PATCH v3 09/11] i3c: master: svc: use spinlock_saveirq at svc_i3c_master_ibi_work()   Frank Li
• [PATCH v3 10/11] i3c: master: svc: wait for Manual ACK/NACK Done before next step   Frank Li
• [PATCH v3 11/11] i3c: master: svc: fix possible assignment of the same address to two devices   Frank Li
• [PATCH v3 01/11] i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin   Frank Li
• [PATCH] i3c: master: Avoid sending DISEC command with old device address.   Frank Li
• [PATCH v3 10/11] i3c: master: svc: wait for Manual ACK/NACK Done before next step   Frank Li
• [PATCH v3 09/11] i3c: master: svc: use spinlock_saveirq at svc_i3c_master_ibi_work()   Frank Li
• [PATCH v3 03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT   Frank Li
• [PATCH v3 02/11] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_BITS   Frank Li
• [PATCH v3 03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT   Frank Li
• [PATCH v3] i3c: master: support to adjust first broadcast address speed   Frank Li
• [PATCH v3 03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT   Frank Li
• [PATCH v4 00/11] i3c: master: some fix and improvemnt for hotjoin   Frank Li
• [PATCH v4 01/11] i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin   Frank Li
• [PATCH v4 02/11] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS   Frank Li
• [PATCH v4 03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT   Frank Li
• [PATCH v4 04/11] i3c: master: Fix dynamic address leak when 'assigned-address' is present   Frank Li
• [PATCH v4 05/11] i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()   Frank Li
• [PATCH v4 06/11] i3c: master: svc: use repeat start when IBI WIN happens   Frank Li
• [PATCH v4 07/11] i3c: master: svc: manually emit NACK/ACK for hotjoin   Frank Li
• [PATCH v4 08/11] i3c: master: svc: need check IBIWON for dynamtica address assign   Frank Li
• [PATCH v4 09/11] i3c: master: svc: use spin_lock_irqsave at svc_i3c_master_ibi_work()   Frank Li
• [PATCH v4 10/11] i3c: master: svc: wait for Manual ACK/NACK Done before next step   Frank Li
• [PATCH v4 11/11] i3c: master: svc: fix possible assignment of the same address to two devices   Frank Li
• [PATCH v2 1/5] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   Jarkko Nikula
• [PATCH v2 2/5] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Jarkko Nikula
• [PATCH v2 2/5] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Jarkko Nikula
• [PATCH RESEND v3 2/6] i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1   Jarkko Nikula
• [PATCH RESEND v3 4/6] i3c: mipi-i3c-hci: Relocate helper macros to HCI header file   Jarkko Nikula
• [PATCH RESEND v3 1/6] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   Jarkko Nikula
• [PATCH RESEND v3 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Jarkko Nikula
• [PATCH RESEND v3 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Jarkko Nikula
• [PATCH RESEND v3 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Jarkko Nikula
• [PATCH v4 2/6] i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1   Jarkko Nikula
• [PATCH v4 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Jarkko Nikula
• [PATCH v4 5/6] i3c: mipi-i3c-hci: Add a quirk to set timing parameters   Jarkko Nikula
• [PATCH v4 6/6] i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold   Jarkko Nikula
• [PATCH] i3c/master: cmd_v1: Fix the exit criteria for the daa procedure   Jarkko Nikula
• [PATCH v5 3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode   Jarkko Nikula
• [PATCH v5 2/6] i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1   Jarkko Nikula
• [PATCH v2 1/2] i3c: master: support to adjust first broadcast address speed   Miquel Raynal
• [EXT] Re: [PATCH v2 1/2] i3c: master: support to adjust first broadcast address speed   Miquel Raynal
• [PATCH v3 01/11] i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin   Miquel Raynal
• [PATCH v3 02/11] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_BITS   Miquel Raynal
• [PATCH v3 03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT   Miquel Raynal
• [PATCH v3 05/11] i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()   Miquel Raynal
• [PATCH v3 06/11] i3c: master: svc: use repeat start when IBI WIN happens   Miquel Raynal
• [PATCH v3 07/11] i3c: master: svc: manually emit NACK/ACK for hotjoin   Miquel Raynal
• [PATCH v3 08/11] i3c: master: svc: need check IBIWON for dynamtica address assign   Miquel Raynal
• [PATCH v3 09/11] i3c: master: svc: use spinlock_saveirq at svc_i3c_master_ibi_work()   Miquel Raynal
• [PATCH v3 10/11] i3c: master: svc: wait for Manual ACK/NACK Done before next step   Miquel Raynal
• [PATCH v3 11/11] i3c: master: svc: fix possible assignment of the same address to two devices   Miquel Raynal
• [PATCH v3 03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT   Miquel Raynal
• [PATCH v3 02/11] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_BITS   Miquel Raynal
• [PATCH v3] i3c: master: support to adjust first broadcast address speed   Miquel Raynal
• [PATCH v3] i3c: master: support to adjust first broadcast address speed   Miquel Raynal
• [PATCH v3 03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT   Miquel Raynal
• [PATCH -next] i3c: master: cdns: fix module autoloading   Mukesh Kumar Savaliya
• [PATCH RESEND v3 1/6] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   Andy Shevchenko
• [PATCH RESEND v3 1/6] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   Andy Shevchenko
• [PATCH RESEND v3 1/6] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   Andy Shevchenko
• [PATCH v4 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Andy Shevchenko
• [PATCH v4 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Andy Shevchenko
• [PATCH v4 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Andy Shevchenko
• [PATCH v4 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Andy Shevchenko
• [PATCH v6 1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List   Andy Shevchenko
• [PATCH v2 1/1] i3c: master: Avoid sending DISEC command with old device address.   Ravindra Yashvant Shinde
• [EXT] Re: [PATCH v2 1/2] i3c: master: support to adjust first broadcast address speed   Carlos Song
• [PATCH] i3c/master: cmd_v1: Fix the exit criteria for the daa procedure   Billy Tsai
• [PATCH] i3c/master: cmd_v1: Fix the exit criteria for the daa procedure   Billy Tsai
• [PATCH v1] i3c/master: cmd_v1: Fix the rule for getting i3c mode   Billy Tsai
• [PATCH v1] i3c/master: cmd_v1: Fix the rule for getting i3c mode   Billy Tsai
• [PATCH] i3c: master: Avoid sending DISEC command with old device address.   nxf24178
• [PATCH 1/2] i3c: master: support to adjust first broadcast address speed   carlos.song at nxp.com
• [PATCH 2/2] i3c: master: svc: use slow speed for first broadcast address   carlos.song at nxp.com
• [PATCH v2 1/2] i3c: master: support to adjust first broadcast address speed   carlos.song at nxp.com
• [PATCH v2 2/2] i3c: master: svc: use slow speed for first broadcast address   carlos.song at nxp.com
• [PATCH v3] i3c: master: support to adjust first broadcast address speed   carlos.song at nxp.com
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   kernel test robot
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   kernel test robot
• [PATCH v1 2/2] i3c: master: Add Nuvoton npcm845 i3c master driver   kernel test robot
• [PATCH 2/2] i3c: master: svc: use slow speed for first broadcast address   kernel test robot
• [PATCH v3 1/5] i3c: mipi-i3c-hci: Add MIPI0100 ACPI ID to the I3C Support List   kernel test robot

Last message date: Thu Aug 29 14:14:08 PDT 2024
Archived on: Thu Aug 29 14:15:33 PDT 2024

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...