March 2018 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Mar 1 19:39:31 PST 2018
Ending: Sat Mar 31 18:57:01 PDT 2018
Messages: 362

• [PATCH v4 3/4] dt-bindings: display: amlogic: DT fix s/resets-names/reset-names/   Neil Armstrong
• [PATCH] meson-gx-socinfo: Add package id for S905H   Neil Armstrong
• [PATCH] ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2   Neil Armstrong
• [PATCH v4 0/2] Meson GXL USB3 PHY driver   Neil Armstrong
• [usb-next PATCH v11 0/8] initialize (multiple) PHYs for a HCD   Neil Armstrong
• [PATCH usb-next v2 0/3] DWC3 support for Amlogic Meson AXG and GXL SoCs   Neil Armstrong
• [PATCH] amlogic: meson-gx-socinfo: Update soc ids   Neil Armstrong
• [PATCH] drm/meson: Add support for DMT modes on HDMI   Neil Armstrong
• [PATCH v2 00/19] clk: meson: use regmap in clock controllers   Neil Armstrong
• [PATCH 00/11] clk: meson: second round of updates   Neil Armstrong
• [GIT PULL] Amlogic clock driver updates for 4.17   Neil Armstrong
• [PATCH] ARM64: dts: meson: bump mali450 clk to 744MHz   Neil Armstrong
• [PATCH v2] amlogic: meson-gx-socinfo: Update soc ids   Neil Armstrong
• [GIT PULL v2] Amlogic clock driver updates for 4.17   Neil Armstrong
• [PATCH 2/3] drm/meson: Use drm_dev_put() instead of drm_dev_unref()   Neil Armstrong
• [PATCH 3/3] drm/meson: Fix some error handling paths in 'meson_drv_bind_master()'   Neil Armstrong
• [PATCH 1/3] drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()'   Neil Armstrong
• [PATCH 0/3] Fix some error handling paths in 'meson_drv_bind_master()'   Neil Armstrong
• [PATCH] drm/meson: Add support for DMT modes on HDMI   Neil Armstrong
• [PATCH] drm/meson: Add support for DMT modes on HDMI   Neil Armstrong
• [PATCH 0/3] dw-hdmi: add property to disable CEC   Neil Armstrong
• [PATCH 1/3] dt-bindings: display: dw_hdmi.txt   Neil Armstrong
• [PATCH 2/3] drm: bridge: dw-hdmi: check the cec-disable property   Neil Armstrong
• [PATCH 3/3] arm64: dts: meson-gxl-s905x-libretech-cc: add cec-disable   Neil Armstrong
• [PATCH -next] drm/meson: Fix potential NULL dereference in meson_drv_bind_master()   Neil Armstrong
• [PATCH -next] drm/meson: Fix potential NULL dereference in meson_drv_bind_master()   Neil Armstrong
• [PATCHv2 0/3] dw-hdmi: add property to disable CEC   Neil Armstrong
• [PATCH 1/4] dt-bindings: clock: meson: update documentation with hhi syscon   Neil Armstrong
• [PATCH v2 0/7] Meson GXL/GXM USB host mode support   Neil Armstrong
• [PATCH 0/4] Meson clock driver   Neil Armstrong
• [PATCH u-boot 0/2] Cleanup for Amlogic GX SoCs   Neil Armstrong
• [PATCH u-boot 1/2] ARM: meson: rename GXBB to GX   Neil Armstrong
• [PATCH u-boot 2/2] ARM: meson: Add cpu info display for GX SoCs   Neil Armstrong
• [PATCH 0/4] Meson clock driver   Neil Armstrong
• [PATCH 3/4] clk: add Amlogic meson clock driver   Neil Armstrong
• [PATCH u-boot] reset: Add Amlogic Meson Reset Controller   Neil Armstrong
• [PATCH] serial: meson: Update compatible with new Linux bindings   Neil Armstrong
• [PATCH u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs   Neil Armstrong
• [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Neil Armstrong
• [PATCH u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs   Neil Armstrong
• [PATCH u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers   Neil Armstrong
• [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Neil Armstrong
• [PATCH u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs   Neil Armstrong
• [PATCH u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers   Neil Armstrong
• [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Neil Armstrong
• [PATCH 3/4] clk: add Amlogic meson clock driver   Neil Armstrong
• [PATCH u-boot] clk: Add get/enable/disable/release for a bulk of clocks   Neil Armstrong
• [PATCH u-boot] reset: Add get/assert/deassert/release for bulk of reset signals   Neil Armstrong
• [PATCH usb-next v2 0/3] DWC3 support for Amlogic Meson AXG and GXL SoCs   Felipe Balbi
• [GIT PULL] Amlogic 64-bit DT updates for v4.17   Arnd Bergmann
• [PATCH 06/10] ARM64: dts: meson: Remove "cooling-{min|max}-level" for CPU nodes   Arnd Bergmann
• [GIT PULL] Amlogic 32-bit DT updates for v4.17, redo   Arnd Bergmann
• [GIT PULL] Amlogic deconfig updates for v4.17   Arnd Bergmann
• [GIT PULL] Amlogic driver updates for v4.17   Arnd Bergmann
• [PATCH v2 1/2] pinctrl: meson: meson8b: fix requesting GPIOs greater than GPIOZ_3   Martin Blumenstingl
• [PATCH v4 0/2] Meson GXL USB3 PHY driver   Martin Blumenstingl
• [PATCH v4 1/2] dt-bindings: phy: Add support for the USB3 PHY on Amlogic Meson GXL SoCs   Martin Blumenstingl
• [PATCH v4 2/2] phy: amlogic: add USB3 PHY support for Meson GXL and GXM   Martin Blumenstingl
• [usb-next PATCH v11 0/8] initialize (multiple) PHYs for a HCD   Martin Blumenstingl
• [usb-next PATCH v11 1/8] dt-bindings: usb: add the documentation for USB HCDs   Martin Blumenstingl
• [usb-next PATCH v11 2/8] usb: add a flag to skip PHY initialization to struct usb_hcd   Martin Blumenstingl
• [usb-next PATCH v11 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Martin Blumenstingl
• [usb-next PATCH v11 4/8] usb: core: hcd: integrate the PHY wrapper into the HCD core   Martin Blumenstingl
• [usb-next PATCH v11 5/8] usb: host: xhci-mtk: remove custom USB PHY handling   Martin Blumenstingl
• [usb-next PATCH v11 6/8] usb: host: ehci-platform: remove custom USB PHY handling   Martin Blumenstingl
• [usb-next PATCH v11 7/8] usb: host: ohci-platform: remove custom USB PHY handling   Martin Blumenstingl
• [usb-next PATCH v11 8/8] usb: core: hcd: remove support for initializing a single PHY   Martin Blumenstingl
• [PATCH usb-next v2 0/3] DWC3 support for Amlogic Meson AXG and GXL SoCs   Martin Blumenstingl
• [PATCH v3 0/1] Meson8b: fix requesting GPIOs greater than GPIOZ_3   Martin Blumenstingl
• [PATCH v3 1/1] ARM: dts: meson8b: the CBUS GPIO controller only has 83 GPIOs   Martin Blumenstingl
• [RFC PATCH] ARM: dts: meson8b-odroidc1: add microSD support   Martin Blumenstingl
• [PATCH v5 0/2] Meson GXL USB3 PHY driver   Martin Blumenstingl
• [PATCH v5 1/2] dt-bindings: phy: Add support for the USB3 PHY on Amlogic Meson GXL SoCs   Martin Blumenstingl
• [PATCH v5 2/2] phy: amlogic: add USB3 PHY support for Meson GXL and GXM   Martin Blumenstingl
• [RFC v1 0/7] Meson GXL/GXM USB host mode support   Martin Blumenstingl
• [RFC v1 1/7] ARM64: dts: meson-gxl: add USB host support   Martin Blumenstingl
• [RFC v1 2/7] ARM64: dts: meson-gxm: add GXM specific USB host configuration   Martin Blumenstingl
• [RFC v1 3/7] ARM64: dts: meson-gxl-s905x-p212: enable the USB controller   Martin Blumenstingl
• [RFC v1 4/7] ARM64: dts: meson-gx-p23x-q20x: enable the USB controller   Martin Blumenstingl
• [RFC v1 5/7] ARM64: dts: meson-gxl-s905x-libretech-cc: enable the USB controller   Martin Blumenstingl
• [RFC v1 6/7] ARM64: dts: meson-gxl-nexbox-a95x: enable the USB controller   Martin Blumenstingl
• [RFC v1 7/7] ARM64: dts: meson-gxm-khadas-vim2: enable the USB controller   Martin Blumenstingl
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Martin Blumenstingl
• [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules   Martin Blumenstingl
• [PATCH v2 1/1] clk: meson: meson8b: add support for the NAND clocks   Martin Blumenstingl
• [RFC PATCH] ARM: dts: meson8b-odroidc1: add microSD support   Martin Blumenstingl
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Martin Blumenstingl
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Martin Blumenstingl
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Martin Blumenstingl
• [PATCHv2 0/3] dw-hdmi: add property to disable CEC   Martin Blumenstingl
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Martin Blumenstingl
• [PATCH usb-next v1] usb: core: phy: fix return value of usb_phy_roothub_exit()   Martin Blumenstingl
• [RFC usb-next v2 0/2] fix HCD PHY suspend handling   Martin Blumenstingl
• [RFC usb-next v2 1/2] usb: core: split usb_phy_roothub_{init,alloc}   Martin Blumenstingl
• [RFC usb-next v2 2/2] usb: core: use phy_exit during suspend if wake up is not supported   Martin Blumenstingl
• [PATCHv2 0/3] dw-hdmi: add property to disable CEC   Martin Blumenstingl
• [PATCH usb-next v1] usb: core: phy: fix return value of usb_phy_roothub_exit()   Martin Blumenstingl
• [RFC usb-next v2 1/2] usb: core: split usb_phy_roothub_{init, alloc}   Martin Blumenstingl
• [RFC usb-next v3 0/2] fix HCD PHY suspend handling   Martin Blumenstingl
• [RFC usb-next v3 1/2] usb: core: split usb_phy_roothub_{init,alloc}   Martin Blumenstingl
• [RFC usb-next v3 2/2] usb: core: use phy_exit during suspend if wake up is not supported   Martin Blumenstingl
• [PATCH v2 0/7] Meson GXL/GXM USB host mode support   Martin Blumenstingl
• [PATCH v2 1/7] ARM64: dts: meson-gxl: add USB host support   Martin Blumenstingl
• [PATCH v2 2/7] ARM64: dts: meson-gxm: add GXM specific USB host configuration   Martin Blumenstingl
• [PATCH v2 3/7] ARM64: dts: meson-gxl-s905x-p212: enable the USB controller   Martin Blumenstingl
• [PATCH v2 4/7] ARM64: dts: meson-gx-p23x-q20x: enable the USB controller   Martin Blumenstingl
• [PATCH v2 5/7] ARM64: dts: meson-gxl-s905x-libretech-cc: enable the USB controller   Martin Blumenstingl
• [PATCH v2 6/7] ARM64: dts: meson-gxl-nexbox-a95x: enable the USB controller   Martin Blumenstingl
• [PATCH v2 7/7] ARM64: dts: meson-gxm-khadas-vim2: enable the USB controller   Martin Blumenstingl
• [PATCH usb-next v4 0/2] fix HCD PHY suspend handling   Martin Blumenstingl
• [PATCH usb-next v4 1/2] usb: core: split usb_phy_roothub_{init, alloc}   Martin Blumenstingl
• [PATCH usb-next v4 2/2] usb: core: use phy_exit during suspend if wake up is not supported   Martin Blumenstingl
• [PATCH v2 0/7] Meson GXL/GXM USB host mode support   Martin Blumenstingl
• [PATCH net-next v1 0/2] Meson8m2 support for dwmac-meson8b   Martin Blumenstingl
• [PATCH net-next v1 1/2] dt-bindings: net: meson-dwmac: add support for the Meson8m2 SoC   Martin Blumenstingl
• [PATCH net-next v1 2/2] net: stmmac: dwmac-meson8b: Add support for the Meson8m2 SoC   Martin Blumenstingl
• [PATCH 2/3] dt-bindings: iio: adc: document the Meson AXG support   Martin Blumenstingl
• [PATCH 1/3] iio: adc: meson-saradc: squash and share the common adc platform data   Martin Blumenstingl
• [PATCH 3/3] iio: adc: meson-axg: add saradc driver   Martin Blumenstingl
• [PATCH] usb: core: phy: Fix usb_phy_roothub_add_phy if GENERIC_PHY=n   Martin Blumenstingl
• [GIT PULL v2] Amlogic clock driver updates for 4.17   Stephen Boyd
• [PATCH v2 1/1] clk: meson: meson8b: add support for the NAND clocks   Stephen Boyd
• [PATCH] ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate   Jerome Brunet
• [PATCH net-next] net: phy: mdio-mux: slience probe defer error   Jerome Brunet
• [PATCH] drm/meson: Add support for DMT modes on HDMI   Jerome Brunet
• [GIT PULL v2] Amlogic clock driver updates for 4.17   Jerome Brunet
• [PATCH 0/4] ARM64: dts: meson: hhi syscon and clock controllers   Jerome Brunet
• [PATCH 1/4] dt-bindings: clock: meson: update documentation with hhi syscon   Jerome Brunet
• [PATCH 2/4] ARM64: dts: meson-gx: sysctrl is the parent of the clock controller   Jerome Brunet
• [PATCH 3/4] ARM64: dts: meson-axg: use hhi syscon for the clock controller   Jerome Brunet
• [PATCH 4/4] ARM64: dts: meson-gx: fix gxl clock controller compatible   Jerome Brunet
• [PATCH] ARM64: dts: meson-gx: make efuse read-only   Jerome Brunet
• [PATCH 0/2] nvmem: meson-efuse: add write support   Jerome Brunet
• [PATCH 1/2] nvmem: meson-efuse: remove econfig global   Jerome Brunet
• [PATCH 2/2] nvmem: meson-efuse: add write support   Jerome Brunet
• [PATCH v2 1/1] clk: meson: meson8b: add support for the NAND clocks   Jerome Brunet
• [PATCH 1/4] dt-bindings: clock: meson: update documentation with hhi syscon   Jerome Brunet
• [PATCH v2 1/1] clk: meson: meson8b: add support for the NAND clocks   Jerome Brunet
• [PATCH v2 2/7] clk: meson: aoclk: refactor common code into dedicated file   Jerome Brunet
• [PATCH v2 1/7] clk: meson: drop meson_aoclk_gate_regmap_ops   Jerome Brunet
• [PATCH v2 7/7] ARM64: dts: meson-axg: add an 32K alt aoclk   Jerome Brunet
• [PATCH 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO   Jerome Brunet
• [PATCH 0/3] clk: meson: drop unnecessary AO clock flags   Jerome Brunet
• [PATCH 1/3] iio: adc: meson-saradc: squash and share the common adc platform data   Jonathan Cameron
• [PATCH 2/3] dt-bindings: iio: adc: document the Meson AXG support   Jonathan Cameron
• [PATCH 3/3] iio: adc: meson-axg: add saradc driver   Jonathan Cameron
• [PATCH 3/3] iio: adc: meson-axg: add saradc driver   Jonathan Cameron
• [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules   Jeremy Cline
• [kbuild-all] [PATCH] nvmem: meson-efuse: fix ptr_ret.cocci warnings   Fabio Estevam
• [PATCH 1/3] dt-bindings: display: dw_hdmi.txt   Fabio Estevam
• [PATCH v3 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree   Marcus Folkesson
• [PATCH v3 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree   Marcus Folkesson
• [PATCH 3/4] clk: add Amlogic meson clock driver   Andreas Färber
• [PATCH 0/4] Meson clock driver   Beniamino Galvani
• [PATCH] serial: meson: Update compatible with new Linux bindings   Simon Glass
• [PATCH 3/4] clk: add Amlogic meson clock driver   Simon Glass
• [PATCH 3/4] clk: add Amlogic meson clock driver   Simon Glass
• [PATCH u-boot] clk: Add get/enable/disable/release for a bulk of clocks   Simon Glass
• [PATCH 3/4] clk: add Amlogic meson clock driver   Simon Glass
• [PATCH u-boot] reset: Add get/assert/deassert/release for bulk of reset signals   Simon Glass
• [PATCH 1/4] dt-bindings: clock: meson: update documentation with hhi syscon   Rob Herring
• [PATCH 1/4] dt-bindings: clock: meson: update documentation with hhi syscon   Rob Herring
• [PATCHv2 1/3] dt-bindings: display: dw_hdmi.txt: add cec-disable property   Rob Herring
• [PATCH v2 3/7] dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC   Rob Herring
• [PATCH v2 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings   Rob Herring
• [PATCH 2/3] dt-bindings: iio: adc: document the Meson AXG support   Rob Herring
• [PATCH] amlogic: meson-gx-socinfo: Update soc ids   Kevin Hilman
• [PATCH] ARM64: dts: meson-axg: add sec_AO system controller   Kevin Hilman
• [PATCH] ARM64: dts: meson-axg: fix pwm_AO_cd compatible   Kevin Hilman
• [PATCH] ARM: dts: meson8b: add the I2C clocks   Kevin Hilman
• [PATCH] ARM64: dts: amlogic: Convert to new-style SPDX license identifiers   Kevin Hilman
• [PATCH] ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate   Kevin Hilman
• [PATCH] ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2   Kevin Hilman
• [PATCH] amlogic: meson-gx-socinfo: Update soc ids   Kevin Hilman
• [PATCH] firmware: meson-sm: rework meson_sm_init to use module_platform_driver_probe   Kevin Hilman
• [PATCH v3 1/1] ARM: dts: meson8b: the CBUS GPIO controller only has 83 GPIOs   Kevin Hilman
• [PATCH] ARM64: dts: meson: bump mali450 clk to 744MHz   Kevin Hilman
• [PATCH v2] amlogic: meson-gx-socinfo: Update soc ids   Kevin Hilman
• [PATCH] ARM64: dts: meson-gx: make efuse read-only   Kevin Hilman
• [PATCH] ARM: dts: meson8b-odroidc1: add microSD support   Kevin Hilman
• [GIT PULL] Amlogic driver updates for v4.17   Kevin Hilman
• [GIT PULL] Amlogic driver updates for v4.17   Kevin Hilman
• [GIT PULL] Amlogic deconfig updates for v4.17   Kevin Hilman
• [GIT PULL] Amlogic 32-bit DT updates for v4.17   Kevin Hilman
• [GIT PULL] Amlogic 64-bit DT updates for v4.17   Kevin Hilman
• [GIT PULL] Amlogic driver updates for v4.17, redo   Kevin Hilman
• [GIT PULL] Amlogic 32-bit DT updates for v4.17   Kevin Hilman
• [GIT PULL] Amlogic 32-bit DT updates for v4.17, redo   Kevin Hilman
• [PATCH] ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate   Kevin Hilman
• [PATCH] ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate   Kevin Hilman
• [GIT PULL] Amlogic 64-bit DT updates for v4.17   Kevin Hilman
• [PATCH] firmware: meson-sm: rework meson_sm_init to use module_platform_driver_probe   Sudeep Holla
• [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules   Marcel Holtmann
• [RFC v1 6/8] Bluetooth: hci_h5: add support for Realtek UART Bluetooth modules   Marcel Holtmann
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Kishon Vijay Abraham I
• [PATCH 0/3] Fix some error handling paths in 'meson_drv_bind_master()'   Christophe JAILLET
• [PATCH 1/3] drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()'   Christophe JAILLET
• [PATCH 2/3] drm/meson: Use drm_dev_put() instead of drm_dev_unref()   Christophe JAILLET
• [PATCH 3/3] drm/meson: Fix some error handling paths in 'meson_drv_bind_master()'   Christophe JAILLET
• [PATCH] ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate   Greg KH
• [RFC usb-next v3 1/2] usb: core: split usb_phy_roothub_{init,alloc}   Greg KH
• [PATCH 06/10] ARM64: dts: meson: Remove "cooling-{min|max}-level" for CPU nodes   Viresh Kumar
• [PATCH 06/10] ARM64: dts: meson: Remove "cooling-{min|max}-level" for CPU nodes   Viresh Kumar
• [PATCH 1/2] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings   Yixun Lan
• [PATCH 2/2] clk: meson-axg: Add AO Clock and Reset controller driver   Yixun Lan
• [PATCH v2 0/7] clk: meson-axg: Add AO Cloclk and Reset driver   Yixun Lan
• [PATCH v2 1/7] clk: meson: drop meson_aoclk_gate_regmap_ops   Yixun Lan
• [PATCH v2 2/7] clk: meson: aoclk: refactor common code into dedicated file   Yixun Lan
• [PATCH v2 3/7] dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC   Yixun Lan
• [PATCH v2 4/7] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings   Yixun Lan
• [PATCH v2 5/7] clk: meson-axg: Add AO Clock and Reset controller driver   Yixun Lan
• [PATCH v2 6/7] arm64: dts: meson-axg: add AO clock driver DT info   Yixun Lan
• [PATCH v2 7/7] ARM64: dts: meson-axg: add an 32K alt aoclk   Yixun Lan
• [PATCH 0/3] clk: meson: drop unnecessary AO clock flags   Yixun Lan
• [PATCH 1/3] clk: meson: drop CLK_SET_RATE_PARENT flag   Yixun Lan
• [PATCH 2/3] clk: meson: drop CLK_IGNORE_UNUSED flag   Yixun Lan
• [PATCH 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO   Yixun Lan
• [PATCH 0/3] iio: adc: meson-axg: add saradc driver support   Yixun Lan
• [PATCH 1/3] iio: adc: meson-saradc: squash and share the common adc platform data   Yixun Lan
• [PATCH 2/3] dt-bindings: iio: adc: document the Meson AXG support   Yixun Lan
• [PATCH 3/3] iio: adc: meson-axg: add saradc driver   Yixun Lan
• [PATCH] ARM64: dts: meson-axg: add saradc support   Yixun Lan
• [PATCH 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO   Yixun Lan
• [PATCH 0/3] clk: meson: drop unnecessary AO clock flags   Yixun Lan
• [PATCH v3 0/6] clk: meson-axg: Add AO Cloclk and Reset driver   Yixun Lan
• [PATCH v3 1/6] clk: meson: aoclk: refactor common code into dedicated file   Yixun Lan
• [PATCH v3 2/6] dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC   Yixun Lan
• [PATCH v3 3/6] dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings   Yixun Lan
• [PATCH v3 4/6] clk: meson-axg: Add AO Clock and Reset controller driver   Yixun Lan
• [PATCH v3 5/6] clk: meson: drop CLK_SET_RATE_PARENT flag   Yixun Lan
• [PATCH v3 6/6] clk: meson: drop CLK_IGNORE_UNUSED flag   Yixun Lan
• [PATCH v3 0/3] ARM64: dts: meson-axg: add AO clock driver   Yixun Lan
• [PATCH v3 1/3] arm64: dts: meson-axg: add AO clock driver DT info   Yixun Lan
• [PATCH v3 2/3] ARM64: dts: meson-axg: add an 32K alt aoclk   Yixun Lan
• [PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO   Yixun Lan
• [PATCH 1/3] iio: adc: meson-saradc: squash and share the common adc platform data   Yixun Lan
• [PATCH net-next] net: phy: mdio-mux: slience probe defer error   Andrew Lunn
• [RFC PATCH] ARM: dts: meson8b-odroidc1: add microSD support   Linus Lüssing
• [PATCH] ARM: dts: meson8b-odroidc1: add microSD support   Linus Lüssing
• [PATCH net-next] net: phy: mdio-mux: slience probe defer error   David Miller
• [PATCH net-next v1 0/2] Meson8m2 support for dwmac-meson8b   David Miller
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Roger Quadros
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Roger Quadros
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Roger Quadros
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Roger Quadros
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Roger Quadros
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Roger Quadros
• [RFC usb-next v2 2/2] usb: core: use phy_exit during suspend if wake up is not supported   Roger Quadros
• [RFC usb-next v2 1/2] usb: core: split usb_phy_roothub_{init,alloc}   Roger Quadros
• [RFC usb-next v3 1/2] usb: core: split usb_phy_roothub_{init,alloc}   Roger Quadros
• [RFC usb-next v3 2/2] usb: core: use phy_exit during suspend if wake up is not supported   Roger Quadros
• [PATCH] media: rc: meson-ir: add timeout on idle   Matthias Reichl
• [PATCH] media: rc: meson-ir: add timeout on idle   Matthias Reichl
• [PATCH] media: rc: meson-ir: add timeout on idle   Matthias Reichl
• [PATCH] media: rc: meson-ir: add timeout on idle   Matthias Reichl
• [PATCH] media: rc: meson-ir: lower timeout and make configurable   Matthias Reichl
• [PATCH] media: rc: meson-ir: add timeout on idle   Matthias Reichl
• [PATCH 0/3] Improve latency of IR decoding   Matthias Reichl
• [PATCH v3 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree   Guenter Roeck
• [PATCH v3 01/22] nvmem: Document struct nvmem_config   Andrey Smirnov
• [PATCH v5 00/21] Verbatim device names and devm_nvmem_(un)register()   Andrey Smirnov
• [PATCH v5 01/21] nvmem: Document struct nvmem_config   Andrey Smirnov
• [PATCH v5 02/21] nvmem: core: Allow specifying device name verbatim   Andrey Smirnov
• [PATCH v5 03/21] nvmem: Introduce devm_nvmem_(un)register()   Andrey Smirnov
• [PATCH v5 04/21] nvmem: vf610-ocotp: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 05/21] nvmem: imx-ocotp: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 06/21] nvmem: uniphier-efuse: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 07/21] nvmem: snvs_lgpr: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 08/21] nvmem: rockchip-efuse: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 09/21] nvmem: mtk-efuse: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 10/21] nvmem: meson-mx-efuse: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 11/21] nvmem: meson-efuse: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 12/21] nvmem: lpc18xx_otp: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 13/21] nvmem: imx-iim: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 14/21] nvmem: bcm-ocotp: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 15/21] nvmem: qfprom: Convert to use devm_nvmem_register()   Andrey Smirnov
• [PATCH v5 16/21] nvmem: snvs_lpgpr: Convert commas to semicolons   Andrey Smirnov
• [PATCH v5 17/21] nvmem: rockchip-efuse: Make use of of_device_get_match_data()   Andrey Smirnov
• [PATCH v5 18/21] nvmem: vf610-ocotp: Do not use "&pdev->dev" explicitly   Andrey Smirnov
• [PATCH v5 19/21] nvmem: rockchip-efuse: Do not use "&pdev->dev" explicitly   Andrey Smirnov
• [PATCH v5 20/21] nvmem: imx-iim: Do not use "&pdev->dev" explicitly   Andrey Smirnov
• [PATCH v5 21/21] nvmem: bcm-ocotp: Do not use "&pdev->dev" explicitly   Andrey Smirnov
• [PATCH v4] watchdog: add SPDX identifiers for watchdog subsystem   Joel Stanley
• [PATCH v2 00/19] clk: meson: use regmap in clock controllers   Michael Turquette
• [PATCH v4 0/4] DT: Fix spelling of standard properties   Geert Uytterhoeven
• [PATCH v4 1/4] arm64: dts: lg1312: DT fix s/#interrupts-cells/#interrupt-cells/   Geert Uytterhoeven
• [PATCH v4 2/4] arm64: dts: lg1313: DT fix s/#interrupts-cells/#interrupt-cells/   Geert Uytterhoeven
• [PATCH v4 3/4] dt-bindings: display: amlogic: DT fix s/resets-names/reset-names/   Geert Uytterhoeven
• [PATCH v4 4/4] dt-bindings: net: btusb: DT fix s/interrupt-name/interrupt-names/   Geert Uytterhoeven
• [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Marek Vasut
• [PATCH u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs   Marek Vasut
• [PATCH u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers   Marek Vasut
• [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Marek Vasut
• [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Marek Vasut
• [PATCH 0/3] dw-hdmi: add property to disable CEC   Hans Verkuil
• [PATCH 1/3] dt-bindings: display: dw_hdmi.txt   Hans Verkuil
• [PATCH 2/3] drm: bridge: dw-hdmi: check the cec-disable property   Hans Verkuil
• [PATCH 3/3] arm64: dts: meson-gxl-s905x-libretech-cc: add cec-disable   Hans Verkuil
• [PATCH 1/3] dt-bindings: display: dw_hdmi.txt   Hans Verkuil
• [PATCHv2 0/3] dw-hdmi: add property to disable CEC   Hans Verkuil
• [PATCHv2 1/3] dt-bindings: display: dw_hdmi.txt: add cec-disable property   Hans Verkuil
• [PATCHv2 2/3] drm: bridge: dw-hdmi: check the cec-disable property   Hans Verkuil
• [PATCHv2 3/3] arm64: dts: meson-gx.dtsi: add cec-disable   Hans Verkuil
• [PATCH v2 1/2] pinctrl: meson: meson8b: fix requesting GPIOs greater than GPIOZ_3   Linus Walleij
• [PATCH v2 2/2] ARM: dts: meson8b: the CBUS GPIO controller only has 83 GPIOs   Linus Walleij
• [usb-next PATCH v11 5/8] usb: host: xhci-mtk: remove custom USB PHY handling   Sean Wang
• [PATCH -next] drm/meson: Fix potential NULL dereference in meson_drv_bind_master()   Wei Yongjun
• [PATCH] media: rc: meson-ir: add timeout on idle   Sean Young
• [PATCH] media: rc: meson-ir: add timeout on idle   Sean Young
• [PATCH] media: rc: meson-ir: add timeout on idle   Sean Young
• [PATCH] media: rc: meson-ir: add timeout on idle   Sean Young
• [PATCH] media: rc: meson-ir: lower timeout and make configurable   Sean Young
• [PATCH 0/3] Improve latency of IR decoding   Sean Young
• [PATCH 1/3] media: rc: set timeout to smallest value required by enabled protocols   Sean Young
• [PATCH 2/3] media: rc: add ioctl to get the current timeout   Sean Young
• [PATCH 3/3] media: rc: per-protocol repeat period and minimum keyup timer   Sean Young
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Chunfeng Yun
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Chunfeng Yun
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Chunfeng Yun
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Chunfeng Yun
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Chunfeng Yun
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Chunfeng Yun
• [PATCH usb-next v10 3/8] usb: core: add a wrapper for the USB PHYs on the HCD   Chunfeng Yun
• [RFC usb-next v2 2/2] usb: core: use phy_exit during suspend if wake up is not supported   Chunfeng Yun
• [RFC usb-next v2 1/2] usb: core: split usb_phy_roothub_{init,alloc}   Chunfeng Yun
• [PATCH usb-next v1] usb: core: phy: fix return value of usb_phy_roothub_exit()   Chunfeng Yun
• [RFC usb-next v2 1/2] usb: core: split usb_phy_roothub_{init,alloc}   Chunfeng Yun
• [PATCH usb-next v1] usb: core: phy: fix return value of usb_phy_roothub_exit()   Chunfeng Yun
• [RFC usb-next v3 1/2] usb: core: split usb_phy_roothub_{init,alloc}   Chunfeng Yun
• [RFC usb-next v3 2/2] usb: core: use phy_exit during suspend if wake up is not supported   Chunfeng Yun
• [PATCH 01/25] nvmem: Document struct nvmem_config   srinivas.kandagatla at linaro.org
• [PATCH 02/25] nvmem: core: Allow specifying device name verbatim   srinivas.kandagatla at linaro.org
• [PATCH 03/25] nvmem: Introduce devm_nvmem_(un)register()   srinivas.kandagatla at linaro.org
• [PATCH 04/25] nvmem: vf610-ocotp: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 05/25] nvmem: imx-ocotp: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 06/25] nvmem: uniphier-efuse: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 07/25] nvmem: snvs_lgpr: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 08/25] nvmem: rockchip-efuse: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 09/25] nvmem: mtk-efuse: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 10/25] nvmem: meson-mx-efuse: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 11/25] nvmem: meson-efuse: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 12/25] nvmem: lpc18xx_otp: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 13/25] nvmem: imx-iim: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 14/25] nvmem: bcm-ocotp: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 15/25] nvmem: qfprom: Convert to use devm_nvmem_register()   srinivas.kandagatla at linaro.org
• [PATCH 16/25] nvmem: snvs_lpgpr: Convert commas to semicolons   srinivas.kandagatla at linaro.org
• [PATCH 17/25] nvmem: rockchip-efuse: Make use of of_device_get_match_data()   srinivas.kandagatla at linaro.org
• [PATCH 18/25] nvmem: vf610-ocotp: Do not use "&pdev->dev" explicitly   srinivas.kandagatla at linaro.org
• [PATCH 19/25] nvmem: rockchip-efuse: Do not use "&pdev->dev" explicitly   srinivas.kandagatla at linaro.org
• [PATCH 20/25] nvmem: imx-iim: Do not use "&pdev->dev" explicitly   srinivas.kandagatla at linaro.org
• [PATCH 21/25] nvmem: bcm-ocotp: Do not use "&pdev->dev" explicitly   srinivas.kandagatla at linaro.org
• [PATCH] nvmem: uniphier-efuse: fix ptr_ret.cocci warnings   kbuild test robot
• [PATCH v4 06/22] nvmem: uniphier-efuse: Convert to use devm_nvmem_register()   kbuild test robot
• [PATCH v4 16/22] nvmem: meson-efuse: Do no gate COMPILE_TEST with MESON_SM   kbuild test robot
• [PATCH] nvmem: meson-mx-efuse: fix ptr_ret.cocci warnings   kbuild test robot
• [PATCH v4 11/22] nvmem: meson-mx-efuse: Convert to use devm_nvmem_register()   kbuild test robot
• [PATCH v4 13/22] nvmem: lpc18xx_otp: Convert to use devm_nvmem_register()   kbuild test robot
• [PATCH] nvmem: lpc18xx_otp: fix ptr_ret.cocci warnings   kbuild test robot
• [PATCH] nvmem: meson-efuse: fix ptr_ret.cocci warnings   kbuild test robot
• [PATCH v4 16/22] nvmem: meson-efuse: Do no gate COMPILE_TEST with MESON_SM   kbuild test robot
• [PATCH] ARM64: dts: meson-axg: add saradc support   kbuild test robot
• [PATCH v3 1/3] arm64: dts: meson-axg: add AO clock driver DT info   kbuild test robot

Last message date: Sat Mar 31 18:57:01 PDT 2018
Archived on: Sat Mar 31 18:57:22 PDT 2018

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...