[PATCH] ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2
Neil Armstrong
narmstrong at baylibre.com
Tue Mar 6 08:19:33 PST 2018
This patch adds a specific wetek dtsi to handle the specific Hub and Play2
boards by no more depending on the p20x dtsi.
This simplifies the hub and play2 dts and will avoid breaking these
boards when adding p200 and p201 specific changes.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
.../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 43 +---
.../boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 83 +------
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 256 +++++++++++++++++++++
3 files changed, 262 insertions(+), 120 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
index 1878ac2..0852da3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -43,50 +43,9 @@
/dts-v1/;
-#include "meson-gxbb-p20x.dtsi"
+#include "meson-gxbb-wetek.dtsi"
/ {
compatible = "wetek,hub", "amlogic,meson-gxbb";
model = "WeTek Hub";
-
- leds {
- compatible = "gpio-leds";
-
- system {
- label = "wetek-play:system-status";
- gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- panic-indicator;
- };
- };
-};
-
-&cvbs_connector {
- status = "disabled";
-};
-
-ðmac {
- status = "okay";
- pinctrl-0 = <ð_rgmii_pins>;
- pinctrl-names = "default";
-
- phy-handle = <ð_phy0>;
- phy-mode = "rgmii";
-
- amlogic,tx-delay-ns = <2>;
-
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- eth_phy0: ethernet-phy at 0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- };
- };
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index f7144fd..63681e9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -43,7 +43,7 @@
/dts-v1/;
-#include "meson-gxbb-p20x.dtsi"
+#include "meson-gxbb-wetek.dtsi"
#include <dt-bindings/input/input.h>
/ {
@@ -51,15 +51,6 @@
model = "WeTek Play 2";
leds {
- compatible = "gpio-leds";
-
- system {
- label = "wetek-play:system-status";
- gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- panic-indicator;
- };
-
wifi {
label = "wetek-play:wifi-status";
gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
@@ -85,82 +76,18 @@
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
};
};
-
- cvbs-connector {
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-};
-
-&cec_AO {
- status = "okay";
- pinctrl-0 = <&ao_cec_pins>;
- pinctrl-names = "default";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
};
-ðmac {
+&i2c_A {
status = "okay";
- pinctrl-0 = <ð_rgmii_pins>;
+ pinctrl-0 = <&i2c_a_pins>;
pinctrl-names = "default";
-
- phy-handle = <ð_phy0>;
- phy-mode = "rgmii";
-
- amlogic,tx-delay-ns = <2>;
-
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- eth_phy0: ethernet-phy at 0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- };
- };
};
-&hdmi_tx {
+&usb1_phy {
status = "okay";
- pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
- pinctrl-names = "default";
};
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
-&i2c_A {
+&usb1 {
status = "okay";
- pinctrl-0 = <&i2c_a_pins>;
- pinctrl-names = "default";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
new file mode 100644
index 0000000..70325b2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman at kernel.org>
+ */
+
+#include "meson-gxbb.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "wetek-play:system-status";
+ gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ panic-indicator;
+ };
+ };
+
+ usb_pwr: regulator-usb-pwrs {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_PWR";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+};
+
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_rgmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
+ phy-mode = "rgmii";
+
+ amlogic,tx-delay-ns = <2>;
+
+ snps,reset-gpio = <&gpio GPIOZ_14 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy at 0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ eee-broken-1000t;
+ };
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+
+ brcmf: wifi at 1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vcc_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb0_phy {
+ status = "okay";
+ phy-supply = <&usb_pwr>;
+};
+
+&usb0 {
+ status = "okay";
+};
--
2.7.4
More information about the linux-amlogic
mailing list