Senao 2511 CD Plus ext2 (was Problem with SMC2532W-B V2 (0xd601 0x0010)

Michael Krigsman mkrigsman
Sun Oct 2 17:01:54 PDT 2005


I have a Senao 2511 CD Plus ext2 giving the same type of errors:

   prism2_enable_aux_port: was not disabled!?
   prism2_enable_aux_port(0) timed out
   Wifi0: valid PDA not found 
   hfa384x_setup_bap - timeout before kernel 

This is a prism 2.5 card and works perfectly in Windows, so it is not the
hardware. I have tried both hostap and wlan_ng with no luck. The card is
new.

Can anyone suggest a way to troubleshoot this? Thank you.




-----Original Message-----
From: James Henderson [mailto:his_jimboness at yahoo.ca] 
Sent: Sunday, October 02, 2005 5:44 PM
To: hostap at shmoo.com
Subject: Re: Problem with SMC2532W-B V2 (0xd601 0x0010)

Hi Tom,

Thanks for the response.  These cards have FCC XI-330*, but the serial
numbers are:
S33HP55NU00541
S33HP53NU01103

The first one has a 55 but the other one, bought at the same time (but not
necessarily from the same batch), doesn't have any of 55, 56 or 58.

Looks like Zcomax/SMC may be messing with the hardware...  Frustrating.

-James

Tom Sharples wrote:
> This may (or may not) be helpful- Zcomax, the manufacturer of the SMC 
> branded cards, plays a little fast and loose with FCC-ID numbers and 
> internal hardware:
> 
> Cards with the FCC ID XI-325*  use the Prism 2.5 chipset.  SMC no 
> longer provide these cards, however they are available on special 
> order directly from Zcom (long, long lead times). HostAP worked fine 
> with these cards.
> 
> Cards with FCC ID XI-330* AND a serial number that has the number 55 
> embedded in it, actually use the Prism 2.5 chipset despite having the 
> FCC ID number associated with the Prism 3.0 chipset.
> 
> Cards with FCC ID XI-330* AND a serial number that has the number 56 
> embedded in it, actually use the Prism 3.0 chipset but don't correctly 
> report TX levels when "auto" mode is selected unless you roll back the 
> secondary firmware to 1.3.2 which breaks wds. There may also be other 
> anomalies in a hostAP enviroment.
> 
> Cards with FCC ID XI-330* AND a serial number that has the number 58 
> (we've never received any 57's) embedded in it (these are the cards we 
> now receive when we order) actually use the Prism 3.0 chipset and DO 
> correctly report TX levels when "auto" mode is selected. HostAP seems 
> to work fine.
> 
> Tom Sharples
> President
> Qorvus Systems, Inc.
> www.qorvus.net
> 360.243.7371
> 
__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com _______________________________________________
HostAP mailing list
HostAP at shmoo.com
http://lists.shmoo.com/mailman/listinfo/hostap






More information about the Hostap mailing list