problems with zydas

[Pedro Ramalhais]

John H. wrote:
> Here is where it is locking up stuff...
> 
>  wpa_supplicant -D zydas -dd -c/etc/wpa_supplicant.conf -iwlan0
> Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
> Reading configuration file '/etc/wpa_supplicant.conf'
> ctrl_interface='/var/run/wpa_supplicant'
> ctrl_interface_group=0
> eapol_version=1
> ap_scan=1
> Line: 190 - start of a new network block
> SSID - hexdump_ascii(len=12):
>      4e 65 74 77 6f 72 6b 34 48 6f 6d 65               Network4Home
> proto: 0x1
> key_mgmt: 0x2
> pairwise: 0x8
> group: 0x1e
> PSK (ASCII passphrase) - hexdump_ascii(len=9):
>      6d 72 73 61 6d 62 65 61 72                        mypass
> priority=2
> PSK (from passphrase) - hexdump(len=32): ea c6 8b 53 41 90 ea 70 f2 80
> b4 ab 91 58 d1 14 a6 bb db 58 22 df 20 50 68 06 17 62 83 7e 1f a8
> Priority group 2
>    id=0 ssid='Network4Home'
> EAPOL: SUPP_PAE entering state DISCONNECTED
> EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> EAPOL: SUPP_BE entering state INITIALIZE
> EAP: EAP entering state DISABLED
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Get own MAC [1211]00:11:0g:51:c7:12
> wpa_driver_zydas_set_wpa: enabled=1
> wpa_driver_zydas_set_key: alg=NONE key_idx=0 set_tx=0 seq_len=0 key_len=0
> wpa_driver_zydas_set_key: alg=NONE key_idx=1 set_tx=0 seq_len=0 key_len=0
> wpa_driver_zydas_set_key: alg=NONE key_idx=2 set_tx=0 seq_len=0 key_len=0
> wpa_driver_zydas_set_key: alg=NONE key_idx=3 set_tx=0 seq_len=0 key_len=0
> wpa_driver_zydas_set_countermeasures: enabled=0
> wpa_driver_zydas_set_drop_unencrypted: enabled=1
> Setting scan request: 0 sec 100000 usec
> Starting AP scan (broadcast SSID)
> 
> 
> 
> ---
> it's locked up here, i can't kill it, and if i try to rmmod zd1211,
> and ifconfig, iwconfig, etc, lock up
> 
> 
> 
> 
> On 10/1/05, John H. <mistamaila at gmail.com> wrote:
> 
>>ok, i am using the zd1211 driver, not the one from hawking, and it
>>works fine on open networks.
>>
>>however, i want to use it on a wpa network, and i set it up to do so,
>>but the only wpa_supplicant i can find with zydas driver is the one
>>linked on zd1211 homepage
>>
>>http://www.zydas.com.tw/web_driver/ZD1211_USB/Linux/lnx_wpa_supplicant_1_2_0_0.zip
>>
>>however, after that one loads wpa_supplicant process, i can see it
>>from ps auxw,but it locks up tons of processes, locking up iwconfig,
>>ifconfig, etc, and i cannot kill them, nor can i kill it.
>>
>>help?
>>
> 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap

If th eproblem is the broadcast scan, try adding ap_scan=0 or ap_scan=2
to the config file.

-- 
Pedro Ramalhais