problems with zydas

[John H.]

Here is where it is locking up stuff...

 wpa_supplicant -D zydas -dd -c/etc/wpa_supplicant.conf -iwlan0
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
Line: 190 - start of a new network block
SSID - hexdump_ascii(len=12):
     4e 65 74 77 6f 72 6b 34 48 6f 6d 65               Network4Home
proto: 0x1
key_mgmt: 0x2
pairwise: 0x8
group: 0x1e
PSK (ASCII passphrase) - hexdump_ascii(len=9):
     6d 72 73 61 6d 62 65 61 72                        mypass
priority=2
PSK (from passphrase) - hexdump(len=32): ea c6 8b 53 41 90 ea 70 f2 80
b4 ab 91 58 d1 14 a6 bb db 58 22 df 20 50 68 06 17 62 83 7e 1f a8
Priority group 2
   id=0 ssid='Network4Home'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Get own MAC [1211]00:11:0g:51:c7:12
wpa_driver_zydas_set_wpa: enabled=1
wpa_driver_zydas_set_key: alg=NONE key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_zydas_set_key: alg=NONE key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_zydas_set_key: alg=NONE key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_zydas_set_key: alg=NONE key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_zydas_set_countermeasures: enabled=0
wpa_driver_zydas_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Starting AP scan (broadcast SSID)



---
it's locked up here, i can't kill it, and if i try to rmmod zd1211,
and ifconfig, iwconfig, etc, lock up




On 10/1/05, John H. <mistamaila at gmail.com> wrote:
> ok, i am using the zd1211 driver, not the one from hawking, and it
> works fine on open networks.
>
> however, i want to use it on a wpa network, and i set it up to do so,
> but the only wpa_supplicant i can find with zydas driver is the one
> linked on zd1211 homepage
>
> http://www.zydas.com.tw/web_driver/ZD1211_USB/Linux/lnx_wpa_supplicant_1_2_0_0.zip
>
> however, after that one loads wpa_supplicant process, i can see it
> from ps auxw,but it locks up tons of processes, locking up iwconfig,
> ifconfig, etc, and i cannot kill them, nor can i kill it.
>
> help?
>