December 2017 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Dec 1 03:03:19 PST 2017
Ending: Sun Dec 31 02:02:44 PST 2017
Messages: 160

• [PATCH] ARM: dts: bcm2835-rpi: re-enable booting from SD card   Alexander Dahl
• bootchooser and state (again)   David GARRIOU
• Fix Documentation build warnings   Sascha Hauer
• [PATCH 1/7] Documentation: arm-qemu-vexpress: Fix too short underline   Sascha Hauer
• [PATCH 2/7] Documentation: Change many code blocks to no highlight   Sascha Hauer
• [PATCH 3/7] Documentation: socfpga: Fix numbered list   Sascha Hauer
• [PATCH 4/7] Documentation: change default highlight language to shell   Sascha Hauer
• [PATCH 5/7] Documentation: defaultenv-2: Change highlight to make   Sascha Hauer
• [PATCH 6/7] Documentation: remove :numbered: from lower level toctrees   Sascha Hauer
• [PATCH 7/7] ARM: psci command: Add to misc group   Sascha Hauer
• [PATCH] net/e1000: add missing \n in error message   Sascha Hauer
• [PATCH 3/5] net: phy: Port MDIO bus miltiplexer framework from Linux kernel   Sascha Hauer
• [PATCH v2] Networking updates   Sascha Hauer
• [PATCH 01/27] detect command: Drop -e option   Sascha Hauer
• [PATCH 02/27] driver: Add device_detect_all() function   Sascha Hauer
• [PATCH 03/27] nvvar: when setting a nvvar to NULL just free the content   Sascha Hauer
• [PATCH 04/27] net: use pr_* functions for messages   Sascha Hauer
• [PATCH 05/27] net: Add and use IP_BROADCAST   Sascha Hauer
• [PATCH 06/27] net: Make domainname and nameserver globalvars   Sascha Hauer
• [PATCH 07/27] net: Add functions to get/set nameserver and domainname   Sascha Hauer
• [PATCH 08/27] net: introduce global.net.server   Sascha Hauer
• [PATCH 09/27] net: dhcp: Do not overwrite serverip if it is valid   Sascha Hauer
• [PATCH 10/27] net: Use a single gateway   Sascha Hauer
• [PATCH 11/27] net: allow udp connections on specified network device   Sascha Hauer
• [PATCH 12/27] net: dhcp: Allow to specify network device   Sascha Hauer
• [PATCH 13/27] net: dhcp: avoid unnecessary casts   Sascha Hauer
• [PATCH 14/27] net: dhcp: Coding style fixes   Sascha Hauer
• [PATCH 15/27] net: dhcp: rework   Sascha Hauer
• [PATCH 16/27] net: Pick network device based on IP settings   Sascha Hauer
• [PATCH 17/27] net: remove "current" network device   Sascha Hauer
• [PATCH 18/27] net: ifup: Factor out a eth_discover function   Sascha Hauer
• [PATCH 19/27] ifup: Use dhcp C API rather than running command   Sascha Hauer
• [PATCH 20/27] net: Provide new way to configure network devices   Sascha Hauer
• [PATCH 21/27] net: update network docs   Sascha Hauer
• [PATCH 22/27] net: environment: remove ethx setup files   Sascha Hauer
• [PATCH 23/27] net: environment: update automounts   Sascha Hauer
• [PATCH 24/27] defaultenv: Add README for new network config   Sascha Hauer
• [PATCH 25/27] net: Add linuxdevname property   Sascha Hauer
• [PATCH 26/27] commands: Add ip_route_add command   Sascha Hauer
• [PATCH 27/27] defaultenv-2: set bootargs correctly for network boot   Sascha Hauer
• [PATCH v1 2/4] MIPS: add generic QCA AR9331 board   Sascha Hauer
• [PATCH v1] usbgadget command: provide -m option to set usb mode   Sascha Hauer
• [PATCH v2 0/6] MDIO bus multiplexer support   Sascha Hauer
• [PATCH 0/4] A bit more consistent interface for "miitool"   Sascha Hauer
• [PATCH] net/e1000: indicate at boot time if flash is in secure mode   Sascha Hauer
• bootchooser and state (again)   Sascha Hauer
• [PATCH] ARM: dts: bcm2835-rpi: re-enable booting from SD card   Sascha Hauer
• [PATCH] Documentation: state: mention SD/eMMC devices   Sascha Hauer
• [PATCH] Documentation: state: mention SD/eMMC devices   Sascha Hauer
• barebox on RaspberryPi2 and Pi3   Sascha Hauer
• [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1   Sascha Hauer
• [PATCH] net: dhcp: make tftp work again   Sascha Hauer
• v2017.12.0   Sascha Hauer
• [PATCH v2 0/5] add support for DPTechnics DPT-Module v1   Sascha Hauer
• [PATCH] spi: imx: make xchg_single timeout value compatible for older boards   Sascha Hauer
• [PATCH] Bootm: remove uimage_close done later in bootm_boot   Sascha Hauer
• [PATCH] net: phy: scan PHYs referenced by phandle   Sascha Hauer
• [PATCH] ARM: boards: phytec-som-am335x: Fallback ram timings   Sascha Hauer
• [PATCH] ARM: dts: bcm2835-rpi: re-enable booting from SD card   Roland Hieber
• [PATCH] net/e1000: indicate at boot time if flash is in secure mode   Uwe Kleine-König
• [PATCH] string.h: Implement strndup   Uwe Kleine-König
• [PATCH] spi: imx: make xchg_single timeout value compatible for older boards   Alexander Kurz
• [PATCH] Bootm: remove uimage_close done later in bootm_boot   Clément Leger
• command: hashsum: md5sum reports wrong sum for the file named 4k.bin   Peter Mamonov
• command: hashsum: md5sum reports wrong sum for the file named 4k.bin   Peter Mamonov
• barebox on RaspberryPi2 and Pi3   Jens Maus
• [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1   Antony Pavlov
• [PATCH] net: make struct bootp __packed to prevent unaligned store on MIPS   Antony Pavlov
• [PATCH] EFI: add poweroff support   Antony Pavlov
• [PATCH 0/4] build: minimize rebuilds   Sam Ravnborg
• [PATCH 1/4] build: fix that defaultenv is always rebuilt   Sam Ravnborg
• [PATCH 2/4] build: fix that passwd.h is always built   Sam Ravnborg
• [PATCH 3/4] build: fix that the bbenv file is always rebuilt   Sam Ravnborg
• [PATCH 4/4] build: fix that LZO file is always rebuilt   Sam Ravnborg
• [PATCH v3 0/24] at91: move reset vector to board code   Sam Ravnborg
• [PATCH 01/24] arm: at91: refactor lowlevel_init selection   Sam Ravnborg
• [PATCH 02/24] arm: at91: drop unused at91sam9x5_lowlevel_init.c   Sam Ravnborg
• [PATCH 03/24] arm: at91: add at91sam926x_board_init.h   Sam Ravnborg
• [PATCH 04/24] at91sam9263ek: move reset vector to board code   Sam Ravnborg
• [PATCH 05/24] at91sam9261ek, at91sam9g10ek: move reset vector to board code   Sam Ravnborg
• [PATCH 06/24] pm9261: move reset vector to board code   Sam Ravnborg
• [PATCH 07/24] at91: drop unused at91sam9261_lowlevel_init   Sam Ravnborg
• [PATCH 08/24] pm9263: move reset vector to board code   Sam Ravnborg
• [PATCH 09/24] usb-a926x: move reset vector to board code   Sam Ravnborg
• [PATCH 10/24] mmccpu: delete unused lowlevel_init   Sam Ravnborg
• [PATCH 11/24] mmccpu: move reset vector to board code   Sam Ravnborg
• [PATCH 12/24] tny-a926x: delete unused tny_a9263_lowlevel_init.c   Sam Ravnborg
• [PATCH 13/24] tny-a926x: move reset vector to board code   Sam Ravnborg
• [PATCH 14/24] qil-a926x: move reset vector to board code   Sam Ravnborg
• [PATCH 15/24] haba-knx: move reset vector to board code   Sam Ravnborg
• [PATCH 16/24] sama5d{3, 4}{xek, xplained}: move reset vector to board code   Sam Ravnborg
• [PATCH 17/24] at91sam9n12ek: move reset vector to board code   Sam Ravnborg
• [PATCH 18/24] at91sam9260ek, at91sam9g20ek: move reset vector to board code   Sam Ravnborg
• [PATCH 19/24] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: move reset vector to board code   Sam Ravnborg
• [PATCH 20/24] animeo: move reset vector to board code   Sam Ravnborg
• [PATCH 21/24] telit-evk-pro3: move reset vector to board code   Sam Ravnborg
• [PATCH 22/24] dss11: move reset vector to board code   Sam Ravnborg
• [PATCH 23/24] at91rm9200ek: move reset vector to board code   Sam Ravnborg
• [PATCH 24/24] arm: at91: remove leftovers from moving reset code in mach-at91   Sam Ravnborg
• [PATCH 0/5] Enable DT support for AT91SAM9263EK   Sam Ravnborg
• [PATCH 1/5] at91sam9263ek: enable multi-image build   Sam Ravnborg
• [PATCH 2/5] at91sam9263ek: add DT file from Linux kernel v4.14-rc4   Sam Ravnborg
• [PATCH 3/5] at91sam9263ek: fix SD card in DT   Sam Ravnborg
• [PATCH 4/5] arm: at91: enable CPU specific init with OF   Sam Ravnborg
• [PATCH 5/5] at91sam9263ek: enable devicetree   Sam Ravnborg
• [PATCH 03/24] arm: at91: add at91sam926x_board_init.h   Sam Ravnborg
• [PATCH 5/5] at91sam9263ek: enable devicetree   Sam Ravnborg
• [RFC PATCH 1/2] arm: at91: move irq_fixup to header file   Sam Ravnborg
• [RFC PATCH 2/2] arm: at91: simplify soc setup   Sam Ravnborg
• [PATCH v4 0/25] at91: move reset vector to board code   Sam Ravnborg
• [PATCH v2 0/4] Enable DT support for AT91SAM9263EK   Sam Ravnborg
• [PATCH v1 1/4] MIPS: ath79: ar9331: add generic RAM macro   Oleksij Rempel
• [PATCH v1 2/4] MIPS: add generic QCA AR9331 board   Oleksij Rempel
• [PATCH v1 3/4] MIPS: add support for DPTechnics DPT-Module v1   Oleksij Rempel
• [PATCH v1 4/4] MIPS: ar9331: add watchdog support   Oleksij Rempel
• [PATCH v1 2/4] MIPS: add generic QCA AR9331 board   Oleksij Rempel
• [PATCH 15/27] net: dhcp: rework   Oleksij Rempel
• [PATCH] net: dhcp: make tftp work again   Oleksij Rempel
• [PATCH v1 1/4] MIPS: ar9331: add watchdog support   Oleksij Rempel
• [PATCH v1 2/4] MIPS: ath79: ar9331: add generic RAM macro   Oleksij Rempel
• [PATCH v1 3/4] MIPS: ath79: ar9331: add ar9331_pbl_generic_start macro   Oleksij Rempel
• [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1   Oleksij Rempel
• [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1   Oleksij Rempel
• [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1   Oleksij Rempel
• [PATCH v2 0/5] add support for DPTechnics DPT-Module v1   Oleksij Rempel
• [PATCH v2 1/5] MIPS: provide HAS_NO_BOARD_HL_CODE   Oleksij Rempel
• [PATCH v2 2/5] MIPS: ar9331: add watchdog support   Oleksij Rempel
• [PATCH v2 3/5] MIPS: ath79: ar9331: add generic RAM macro   Oleksij Rempel
• [PATCH v2 4/5] MIPS: ath79: ar9331: add ar9331_pbl_generic_start macro   Oleksij Rempel
• [PATCH v2 5/5] MIPS: add support for DPTechnics DPT-Module v1   Oleksij Rempel
• [PATCH] net: make struct bootp __packed to prevent unaligned store on MIPS   Oleksij Rempel
• FW: Handling boot on NAND Bad Blocks   Kjell Ove Røte
• [PATCH] bootchooser: Fix initcall before environment is ready   Gavin Schenk
• [PATCH] bootchooser: Fix initcall before environment is ready   Schenk, Gavin
• [PATCH] ARM: boards: phytec-som-am335x: Fallback ram timings   Daniel Schultz
• [PATCH 1/2] common: state: Add property to protect existing data   Daniel Schultz
• [PATCH 2/2] ARM: dts: AM335x: Add keep-previous-content property   Daniel Schultz
• [PATCH] ARM: boards: phytec-som-am335x: Revert unified MLO for 1GB   Daniel Schultz
• [PATCH] ARM: boards: phytec-som-am335x: Fallback ram timings   Daniel Schultz
• [PATCH 3/5] net: phy: Port MDIO bus miltiplexer framework from Linux kernel   Andrey Smirnov
• [PATCH v2 0/6] MDIO bus multiplexer support   Andrey Smirnov
• [PATCH v2 1/6] ARM: vybrid: zii: Make use of DT code from Linux kernel   Andrey Smirnov
• [PATCH v2 2/6] mdio_bus: Port of_mdio_find_bus() from Linux kernel   Andrey Smirnov
• [PATCH v2 3/6] net: phy: Port MDIO bus miltiplexer framework from Linux kernel   Andrey Smirnov
• [PATCH v2 4/6] net: phy: Port GPIO controlled MDIO multiplexer driver   Andrey Smirnov
• [PATCH v2 5/6] net: mdio-mux: Avoid probing multiplexed busses   Andrey Smirnov
• [PATCH v2 6/6] zii_vf610_dev_defconfig: Select MDIO bus GPIO multiplexer   Andrey Smirnov
• [PATCH 0/4] A bit more consistent interface for "miitool"   Andrey Smirnov
• [PATCH 1/4] commands: miitool: Constify 'phydevname' in mdiobus_show()   Andrey Smirnov
• [PATCH 2/4] fs: Introduce devpath_to_name()   Andrey Smirnov
• [PATCH 3/4] i.MX: imu-bbu-internal: Make use of devpath_to_name()   Andrey Smirnov
• [PATCH 4/4] commands/miitool: Allow specifying PHY by their full path   Andrey Smirnov
• [PATCH 5/5] at91sam9263ek: enable devicetree   Andrey Smirnov
• [PATCH 2/5] at91sam9263ek: add DT file from Linux kernel v4.14-rc4   Andrey Smirnov
• [PATCH 02/24] arm: at91: drop unused at91sam9x5_lowlevel_init.c   Andrey Smirnov
• [PATCH 03/24] arm: at91: add at91sam926x_board_init.h   Andrey Smirnov
• [PATCH] ARM: dts: bcm2835-rpi: re-enable booting from SD card   Lucas Stach
• [PATCH] net: phy: scan PHYs referenced by phandle   Lucas Stach
• [PATCH] linux/kernel.h: move ALIGN_DOWN() to include/linux/kernel.h   Masahiro Yamada
• [PATCH] linux/kernel.h: move ALIGN_DOWN() to include/linux/kernel.h   Masahiro Yamada

Last message date: Sun Dec 31 02:02:44 PST 2017
Archived on: Sun Dec 31 02:03:03 PST 2017

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...