[PATCH] ARM: boards: phytec-som-am335x: Fallback ram timings

[Daniel Schultz]

Hi,


On 12/15/2017 08:49 AM, Sascha Hauer wrote:
> Hi Daniel,
>
> On Thu, Dec 14, 2017 at 04:51:15PM +0100, Daniel Schultz wrote:
>> The 'get_ram_size' function can return false values with 1GB RAMs during
>> warm reset. If a not-existing RAM size will be returned, the fallback
>> RAM timings get loaded to prevent hangs.
> Just continuing with wrong ram size and fallback timing is not really an
> option. It doesn't help the user and only changes the bug reports you
> get.
>
> Sascha
>
yes, sorry. I sent a new patch to remove the bug from our MLO and I will 
investigate for this problem next year, because this seems to be a 
little more trickier.

Daniel
>> Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
>> ---
>>   arch/arm/boards/phytec-som-am335x/lowlevel.c | 3 ++-
>>   1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boards/phytec-som-am335x/lowlevel.c b/arch/arm/boards/phytec-som-am335x/lowlevel.c
>> index b1576ee..5030966 100644
>> --- a/arch/arm/boards/phytec-som-am335x/lowlevel.c
>> +++ b/arch/arm/boards/phytec-som-am335x/lowlevel.c
>> @@ -174,8 +174,9 @@ static noinline void physom_board_init(void *fdt, int sdram, int module_family)
>>   		/* Find the ram size and set up the correct ram timings */
>>   		ramsize = get_ram_size((long *) 0x80000000, SZ_1G);
>>   		timing = get_timings_by_size(module_family, ramsize);
>> +		/* In case of a failure, load generic ram timings as fallback */
>>   		if (!timing)
>> -			hang();
>> +			timing = get_minimal_timings(module_family);
>>   	}
>>   
>>   	am335x_sdram_init(DDR_IOCTRL, &physom_cmd,
>> -- 
>> 2.7.4
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
>>

-- 
Mit freundlichen Grüßen,
With best regards,
   Daniel Schultz

- Entwicklung -
Tel.: 	+49 6131 92 21 457
d.schultz at phytec.de
www.phytec.de

Sie finden uns auch auf: Facebook, LinkedIn, Xing, YouTube

PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
Handelsregister Mainz HRB 4656 | Finanzamt Mainz-Mitte | St.Nr. 266500608,
DE 149059855
This E-Mail may contain confidential or privileged information. If you are
not the intended recipient (or have received this E-Mail in error) please
notify the sender immediately and destroy this E-Mail. Any unauthorized
copying, disclosure or distribution of the material in this E-Mail is
strictly forbidden.