August 2017 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Aug 1 01:38:22 PDT 2017
Ending: Thu Aug 31 13:16:07 PDT 2017
Messages: 202

• [PATCH v2 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Loic Poulain
• [PATCH v2 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Loic Poulain
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Loic Poulain
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Sebastian Reichel
• Rpi3: no ethernet in 4.13: bisected to patch 'USB: of: fix root-hub device-tree node handling'   Hans Verkuil
• [PATCH] pinctrl: bcm2835: constify gpio_chip structure   Linus Walleij
• Rpi3: no ethernet in 4.13: bisected to patch 'USB: of: fix root-hub device-tree node handling'   Johan Hovold
• Rpi3: no ethernet in 4.13: bisected to patch 'USB: of: fix root-hub device-tree node handling'   Hans Verkuil
• Rpi3: no ethernet in 4.13: bisected to patch 'USB: of: fix root-hub device-tree node handling'   Johan Hovold
• Rpi3: no ethernet in 4.13: bisected to patch 'USB: of: fix root-hub device-tree node handling'   Stefan Wahren
• Rpi3: no ethernet in 4.13: bisected to patch 'USB: of: fix root-hub device-tree node handling'   Robin Murphy
• Rpi3: no ethernet in 4.13: bisected to patch 'USB: of: fix root-hub device-tree node handling'   Johan Hovold
• [PATCH] pinctrl: Convert to using %pOF instead of full_name   Linus Walleij
• [PATCH] pinctrl: bcm2835: Remove unneeded irq_group field   Linus Walleij
• Rpi3: no ethernet in 4.13: bisected to patch 'USB: of: fix root-hub device-tree node handling'   Stefan Wahren
• Rpi3: no ethernet in 4.13: bisected to patch 'USB: of: fix root-hub device-tree node handling'   Hans Verkuil
• [PATCH] dma-mapping: skip USB devices when configuring DMA during probe   Johan Hovold
• Rpi3: no ethernet in 4.13: bisected to patch 'USB: of: fix root-hub device-tree node handling'   Johan Hovold
• [PATCH] dma-mapping: skip USB devices when configuring DMA during probe   Robin Murphy
• [PATCH] dma-mapping: skip USB devices when configuring DMA during probe   Johan Hovold
• [PATCH v2] dma-mapping: skip USB devices when configuring DMA during probe   Johan Hovold
• [PATCH v2] dma-mapping: skip USB devices when configuring DMA during probe   Robin Murphy
• [PATCH v2] dma-mapping: skip USB devices when configuring DMA during probe   Alan Stern
• [PATCH v2] dma-mapping: skip USB devices when configuring DMA during probe   Johan Hovold
• [PATCH v2] dma-mapping: skip USB devices when configuring DMA during probe   Robin Murphy
• [PATCH v2] dma-mapping: skip USB devices when configuring DMA during probe   Johan Hovold
• [PATCH v2] dma-mapping: skip USB devices when configuring DMA during probe   Johan Hovold
• [PATCH v2] dma-mapping: skip USB devices when configuring DMA during probe   Johan Hovold
• [PATCH] dma-mapping: skip USB devices when configuring DMA during probe   kbuild test robot
• [PATCH] dma-mapping: skip USB devices when configuring DMA during probe   kbuild test robot
• [PATCH V2 0/3] ARM: bcm283x: Raspberry Pi Zero W support   Eric Anholt
• [PATCH v2 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Marcel Holtmann
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Stefan Wahren
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Marcel Holtmann
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Stefan Wahren
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Marcel Holtmann
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Stefan Wahren
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Marcel Holtmann
• staging: bcm2835-audio: Fix memory corruption   Stefan Wahren
• [PATCH 0/6] constify vb2_ops structures   Julia Lawall
• [PATCH 5/6] staging: bcm2835-camera: constify vb2_ops structures   Julia Lawall
• [PATCH 0/4] constify thermal_zone_of_device_ops structures   Julia Lawall
• [PATCH 4/4] thermal: bcm2835: constify thermal_zone_of_device_ops structures   Julia Lawall
• [PATCH v2] dma-mapping: skip USB devices when configuring DMA during probe   kbuild test robot
• [PATCH 0/3] ARM: bcm2836: Move SMP startup code to arch/arm   Stefan Wahren
• [PATCH 1/3] dt-bindings: arm: add SMP enable-method for BCM2836   Stefan Wahren
• [PATCH 2/3] ARM: dts: bcm283x: Add 32-bit enable method for SMP   Stefan Wahren
• [PATCH 3/3] irqchip: bcm2836: Move SMP startup code to arch/arm   Stefan Wahren
• [PATCH 4/4] thermal: bcm2835: constify thermal_zone_of_device_ops structures   Stefan Wahren
• [PATCH 2/2] Bluetooth: hci_bcm: Add serdev support   Peter Robinson
• [PATCH 3/3] irqchip: bcm2836: Move SMP startup code to arch/arm   Marc Zyngier
• [PATCH 3/3] irqchip: bcm2836: Move SMP startup code to arch/arm   Phil Elwell
• [PATCH 3/3] irqchip: bcm2836: Move SMP startup code to arch/arm   Stefan Wahren
• [PATCH 2/2] Bluetooth: hci_bcm: Add serdev support   Marcel Holtmann
• [PATCH v3 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Loic Poulain
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Loic Poulain
• [PATCH v3 3/3] Bluetooth: hci_bcm: Add serdev support   Loic Poulain
• [GIT PULL 1/2] bcm2835-dt-next-2017-08-07   Eric Anholt
• [GIT PULL 2/2] bcm2835-defconfig-next-2017-08-07   Eric Anholt
• [PATCH 3/3] irqchip: bcm2836: Move SMP startup code to arch/arm   Eric Anholt
• [GIT PULL 1/2] bcm2835-dt-next-2017-08-07   Florian Fainelli
• [GIT PULL 2/2] bcm2835-defconfig-next-2017-08-07   Florian Fainelli
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Eric Anholt
• [PATCH v2 3/3] Bluetooth: hci_bcm: Add serdev support   Marcel Holtmann
• [PATCH] staging: bcm2835-audio: Fix memory corruption   Phil Elwell
• [PATCH 0/4] constify thermal_zone_of_device_ops structures   Zhang Rui
• [PATCH 0/4] constify thermal_zone_of_device_ops structures   Julia Lawall
• [PATCH 0/9 v2] constify thermal_zone_of_device_ops structures   Julia Lawall
• [PATCH 7/9 v2] thermal: bcm2835: constify thermal_zone_of_device_ops structures   Julia Lawall
• [PATCH 7/9 v2] thermal: bcm2835: constify thermal_zone_of_device_ops structures   Stefan Wahren
• [PATCH 2/2] arm64: dts: move rpi into rpi directory   kbuild test robot
• [PATCH] staging: bcm2835-audio: constify snd_pcm_ops structures   Arvind Yadav
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Rob Herring
• [PATCH v3 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Rob Herring
• [PATCH] staging: bcm2835-audio: Fix memory corruption   Dan Carpenter
• [PATCH] staging: bcm2835-audio: Fix memory corruption   Phil Elwell
• [PATCH] staging: bcm2835-audio: Fix memory corruption   Dan Carpenter
• [PATCH] staging: bcm2835-audio: Fix memory corruption   Dan Carpenter
• [PATCH] staging: bcm2835-audio: Fix memory corruption   Dan Carpenter
• [PATCH] staging: bcm2835-audio: Fix memory corruption   Phil Elwell
• [PATCH] staging: bcm2835-audio: Fix memory corruption   Dan Carpenter
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• [PATCH 1/3] dt-bindings: arm: add SMP enable-method for BCM2836   Rob Herring
• [PATCH 0/9 v2] constify thermal_zone_of_device_ops structures   Zhang Rui
• [PATCH 0/9 v2] constify thermal_zone_of_device_ops structures   Julia Lawall
• brcmfmac: BCM43431 won't get probed on Raspberry Pi Zero W   Stefan Wahren
• brcmfmac: BCM43431 won't get probed on Raspberry Pi Zero W   Arend van Spriel
• [PATCH v2] staging: bcm2835-audio: Fix memory corruption   Phil Elwell
• [PATCH v2] staging: bcm2835-audio: Fix memory corruption   Dan Carpenter
• PMU setting in bcm2387 dtsi file   Vince Weaver
• [PATCH V2 0/2] pwm: bcm2835: Support for polarity setting via DT   Stefan Wahren
• [PATCH V2 1/2] dt-bindings: pwm-bcm2835: Increase pwm-cells   Stefan Wahren
• [PATCH V2 2/2] pwm: bcm2835: Support for polarity setting via DT   Stefan Wahren
• PMU setting in bcm2387 dtsi file   Stefan Wahren
• [PATCH 0/6] drivers: make snd_pcm_hardware const   Bhumika Goyal
• [PATCH 1/6] [media] usb: make snd_pcm_hardware const   Bhumika Goyal
• [PATCH 2/6] [media] pci: make snd_pcm_hardware const   Bhumika Goyal
• [PATCH 3/6] drm: bridge: dw-hdmi: make snd_pcm_hardware const   Bhumika Goyal
• [PATCH 4/6] usb: gadget: make snd_pcm_hardware const   Bhumika Goyal
• [PATCH 5/6] staging: bcm2835-audio: make snd_pcm_hardware const   Bhumika Goyal
• [PATCH 6/6] [media] tuners: make snd_pcm_hardware const   Bhumika Goyal
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Loic Poulain
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Loic Poulain
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Stefan Wahren
• [PATCH] arm64: bcm2837 dts: enable bcm2708 frambuffer driver for the raspberry pi-3   Eric Anholt
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• [PATCH v3 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Eric Anholt
• [GIT PULL 1/2] bcm2835-dt-next-2017-08-15   Eric Anholt
• [GIT PULL 2/2] bcm2835-soc-next-2017-08-15   Eric Anholt
• PMU setting in bcm2387 dtsi file   Vince Weaver
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Rob Herring
• PMU setting in bcm2387 dtsi file   Stefan Wahren
• PMU setting in bcm2387 dtsi file   Stefan Wahren
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Peter Robinson
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• PMU setting in bcm2387 dtsi file   Vince Weaver
• PMU setting in bcm2387 dtsi file   Stefan Wahren
• [GIT PULL 1/2] bcm2835-dt-next-2017-08-15   Florian Fainelli
• [GIT PULL 2/2] bcm2835-soc-next-2017-08-15   Florian Fainelli
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Loic Poulain
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• [GIT PULL 2/2] bcm2835-soc-next-2017-08-15   Eric Anholt
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Eric Anholt
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Marcel Holtmann
• [PATCH v4 1/4] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Loic Poulain
• [PATCH v4 2/4] ARM: dts: bcm283x: Use stdout-path instead of console bootarg   Loic Poulain
• [PATCH v4 3/4] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave   Loic Poulain
• [PATCH v4 4/4] Bluetooth: hci_bcm: Add serdev support   Loic Poulain
• [GIT PULL 2/2] bcm2835-soc-next-2017-08-15   Florian Fainelli
• [PATCH v4 4/4] Bluetooth: hci_bcm: Add serdev support   Marcel Holtmann
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Eric Anholt
• [PATCH v4 4/4] Bluetooth: hci_bcm: Add serdev support   Marcel Holtmann
• [PATCH v3 2/3] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 as serial slave   Phil Elwell
• [PATCH v4 4/4] Bluetooth: hci_bcm: Add serdev support   Loic Poulain
• [PATCH V2 0/2] pwm: bcm2835: Support for polarity setting via DT   Thierry Reding
• Crash when booting RPi2 / bcm2836 with ftrace=function   Matthias Reichl
• Crash when booting RPi2 / bcm2836 with ftrace=function   Stefan Wahren
• Crash when booting RPi2 / bcm2836 with ftrace=function   Matthias Reichl
• [PATCH v4 1/4] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Rob Herring
• [PATCH v4 2/4] ARM: dts: bcm283x: Use stdout-path instead of console bootarg   Rob Herring
• [PATCH v4 3/4] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave   Rob Herring
• [PATCH v2 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Maxime Ripard
• [PATCH v2 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Stefan Wahren
• [PATCH v2 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Loic Poulain
• [PATCH] irqchip: Convert to using %pOF instead of full_name   Marc Zyngier
• [PATCH v2 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Maxime Ripard
• [PATCH v2 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Marcel Holtmann
• [PATCH v4 3/4] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave   Marcel Holtmann
• Crash when booting RPi2 / bcm2836 with ftrace=function   Steven Rostedt
• Crash when booting RPi2 / bcm2836 with ftrace=function   Matthias Reichl
• Crash when booting RPi2 / bcm2836 with ftrace=function   Steven Rostedt
• [PATCH v4 3/4] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave   Eric Anholt
• [PATCH v4 3/4] ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave   Rob Herring
• Crash when booting RPi2 / bcm2836 with ftrace=function   Matthias Reichl
• Crash when booting RPi2 / bcm2836 with ftrace=function   Steven Rostedt
• PMU setting in bcm2387 dtsi file   Vince Weaver
• [PATCH] Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro   Steven Rostedt
• [PATCH] Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro   Matthias Reichl
• [PATCH] Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro   Kees Cook
• [PATCH] Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro   Steven Rostedt
• [PATCH] ARM: bcm283x: Fix SMP for old dtb files   Stefan Wahren
• PMU setting in bcm2387 dtsi file   Stefan Wahren
• [PATCH] ARM: bcm283x: Fix SMP for old dtb files   Arnd Bergmann
• [PATCH] ARM: bcm283x: Fix SMP for old dtb files   Eric Anholt
• [GIT PULL] bcm2835-soc-next-2017-08-24   Eric Anholt
• [GIT PULL] bcm2835-soc-next-2017-08-24   Florian Fainelli
• [PATCH] staging: bcm2835-camera: make video_device const   Bhumika Goyal
• [PATCH v2 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Stefan Wahren
• [PATCH v2 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Marcel Holtmann
• [PATCH v2 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Stefan Wahren
• PFNs busy flood during vchiq_test   Stefan Wahren
• [PATCH] clocksource: Delete an error message for a failed memory allocation in bcm2835_timer_init()   SF Markus Elfring
• [RFC 0/2] BCM283x Camera Receiver driver   Hans Verkuil
• PFNs busy flood during vchiq_test   Eric Anholt
• [PATCH] clocksource: Delete an error message for a failed memory allocation in bcm2835_timer_init()   Daniel Lezcano
• [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure   Daniel Lezcano
• [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure   SF Markus Elfring
• [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure   Daniel Lezcano
• [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure   SF Markus Elfring
• [PATCH 9/9] clocksource/drivers/bcm2835: Remove message on memory allocation failure   Daniel Lezcano
• clocksource/drivers/bcm2835: Remove message on memory allocation failure   SF Markus Elfring
• clocksource/drivers/bcm2835: Remove message on memory allocation failure   Daniel Lezcano
• [RFC 0/2] BCM283x Camera Receiver driver   Dave Stevenson
• [RFC 0/2] BCM283x Camera Receiver driver   Hans Verkuil
• [RFC 0/2] BCM283x Camera Receiver driver   Stefan Wahren
• [RFC 0/2] BCM283x Camera Receiver driver   Dave Stevenson
• [RFC 0/2] BCM283x Camera Receiver driver   Hans Verkuil
• [PATCH] thermal: use upstream bcm2835 thermal driver for arm64   Allen Wild
• [PATCH] thermal: use upstream bcm2835 thermal driver for arm64   Eric Anholt
• [PATCH] thermal: use upstream bcm2835 thermal driver for arm64   Stefan Wahren
• [RFC 0/2] BCM283x Camera Receiver driver   Hans Verkuil
• [PATCH 1/2] ARM: dts: Add the CLCD controller to Cygnus.   Eric Anholt
• [PATCH 2/2] ARM: dts: Add the PWM node to Cygnus   Eric Anholt
• [PATCH v2 1/3] dt-bindings: net: bluetooth: Add broadcom-bluetooth   Frédéric Danis
• [PATCH 2/2] ARM: dts: Add the PWM node to Cygnus   Scott Branden
• [PATCH 1/2] ARM: dts: Add the CLCD controller to Cygnus.   Scott Branden

Last message date: Thu Aug 31 13:16:07 PDT 2017
Archived on: Fri Sep 1 00:38:18 PDT 2017

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...