September 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Sep 1 07:10:29 PDT 2016
Ending: Fri Sep 30 10:07:27 PDT 2016
Messages: 213

• 全民VIP强势来袭2016您就是VIP，属于您的至尊赌场，澳门金沙集团！(AD)   oujujian
• [RFT PATCH v4 0/3] usb: dwc2: Fix core reset and force mode delays   John Youn
  • [RFT PATCH v4 1/3] usb: dwc2: gadget: Only initialize device if in device mode   John Youn
  • [RFT PATCH v4 2/3] usb: dwc2: Add delay to core soft reset   John Youn
  • [RFT PATCH v4 3/3] usb: dwc2: Properly account for the force mode delays   John Youn
  • [RFT PATCH v4 0/3] usb: dwc2: Fix core reset and force mode delays   Stefan Wahren
    • [RFT PATCH v4 0/3] usb: dwc2: Fix core reset and force mode delays   Felipe Balbi
• 享受精致服务——特殊的尊贵权限，只在澳门金沙集团 VIP culb！(AD)   baiweiguan
• [PATCH v3 0/4] clk: bcm2835: critical clocks and parent selection   Martin Sperl
  • [PATCH v3 0/4] clk: bcm2835: critical clocks and parent selection   Stephen Boyd
• [PATCH] dt: assign uart0 to BT and uart1 to pin headers   Gerd Hoffmann
• [PATCH 0/8] ARM: dts: bcm283x: add and use pinctrl groups   Gerd Hoffmann
  • [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Gerd Hoffmann
    • [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Stefan Wahren
      • [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Eric Anholt
      • [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Gerd Hoffmann
    • [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Stefan Wahren
      • [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Gerd Hoffmann
      • [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Eric Anholt
      • [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Dave Stevenson
      • [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Eric Anholt
      • [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Stefan Wahren
  • [PATCH 2/8] ARM: dts: bcm283x: Add the emmc pin group to bcm283x.dtsi.   Gerd Hoffmann
  • [PATCH 3/8] ARM: dts: bcm283x: Add a group for mapping pins 48-53 to sdhost.   Gerd Hoffmann
  • [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.   Gerd Hoffmann
    • [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.   Stefan Wahren
      • [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.   Gerd Hoffmann
      • [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.   Stefan Wahren
      • [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.   Gerd Hoffmann
      • [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.   Gerd Hoffmann
      • [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.   Scott Branden
      • [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.   Stefan Wahren
      • [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.   Scott Branden
      • [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.   Eric Anholt
  • [PATCH 5/8] ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio   Gerd Hoffmann
  • [PATCH 6/8] ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio   Gerd Hoffmann
  • [PATCH 7/8] ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio   Gerd Hoffmann
  • [PATCH 8/8] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio   Gerd Hoffmann
• [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode   Gerd Hoffmann
  • [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode   Stefan Wahren
    • [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode   Gerd Hoffmann
      • [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode   Stefan Wahren
      • [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode   Eric Anholt
      • [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode   Stefan Wahren
      • [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode   Eric Anholt
• [PATCH] char: hw_random: bcm2835: handle of_iomap failures in bcm2835 driver   Herbert Xu
• [PATCH v5 0/3] usb: dwc2: Fix core reset and force mode delays   John Youn
  • [PATCH v5 1/3] usb: dwc2: gadget: Only initialize device if in device mode   John Youn
  • [PATCH v5 2/3] usb: dwc2: Add delay to core soft reset   John Youn
  • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   John Youn
    • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   Heiko Stuebner
      • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   Stefan Wahren
      • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   Heiko Stuebner
      • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   Stefan Wahren
      • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   Heiko Stübner
      • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   John Youn
      • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   Heiko Stübner
      • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   John Youn
      • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   Stefan Wahren
      • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   John Youn
      • [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays   John Youn
• [PATCH 2/5] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Gerd Hoffmann
  • [PATCH 2/5] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Eric Anholt
    • [PATCH 2/5] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Ulf Hansson
• [RFC 00/17] clk: Add per-controller locks to fix deadlocks   Stephen Boyd
• [PATCH V4 0/4] thermal: bcm2835: add thermal driver   kernel at martin.sperl.org
  • [PATCH V4 1/4] dt: bindings: add thermal device driver for bcm2835   kernel at martin.sperl.org
  • [PATCH V4 2/4] thermal: bcm2835: add thermal driver for bcm2835 soc   kernel at martin.sperl.org
    • [PATCH V4 2/4] thermal: bcm2835: add thermal driver for bcm2835 soc   Eric Anholt
  • [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x   kernel at martin.sperl.org
  • [PATCH V4 4/4] ARM: bcm2835: add thermal driver to default_config   kernel at martin.sperl.org
• [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x   Stefan Wahren
  • [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x   Martin Sperl
  • [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x   Stefan Wahren
    • [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x   Martin Sperl
      • [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x   Stefan Wahren
      • [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x   Martin Sperl
      • [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x   Stefan Wahren
• [PATCH v2 1/2] ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi   Ian Campbell
  • [PATCH v2 1/2] ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi   Arnd Bergmann
    • [PATCH v2 1/2] ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi   Ian Campbell
• [PATCH v2 0/6] ARM: dts: bcm283x: add and use pinctrl groups   Gerd Hoffmann
  • [PATCH v2 1/6] pinctrl: bcm2835: add pull defines to dt bindings   Gerd Hoffmann
  • [PATCH v2 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Gerd Hoffmann
    • [PATCH v2 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Stefan Wahren
      • [PATCH v2 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Stefan Wahren
      • [PATCH v2 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Gerd Hoffmann
      • [PATCH v2 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Gerd Hoffmann
  • [PATCH v2 3/6] ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio   Gerd Hoffmann
  • [PATCH v2 4/6] ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio   Gerd Hoffmann
  • [PATCH v2 5/6] ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio   Gerd Hoffmann
  • [PATCH v2 6/6] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio   Gerd Hoffmann
    • [PATCH v2 6/6] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio   Stefan Wahren
• [PATCH V5 0/6] thermal: bcm2835: add thermal driver   kernel at martin.sperl.org
  • [PATCH V5 1/6] dt: bindings: add thermal device driver for bcm2835   kernel at martin.sperl.org
  • [PATCH V5 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc   kernel at martin.sperl.org
    • [PATCH V5 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc   Eric Anholt
    • [PATCH V5 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc   Stefan Wahren
      • [PATCH V5 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc   kernel at martin.sperl.org
  • [PATCH V5 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x   kernel at martin.sperl.org
    • [PATCH V5 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x   Stefan Wahren
  • [PATCH V5 4/6] ARM64: bcm2835: dts: add thermal node to device-tree of bcm2837   kernel at martin.sperl.org
  • [PATCH V5 5/6] ARM: bcm2835: add thermal driver to default_config   kernel at martin.sperl.org
  • [PATCH V5 6/6] ARM64: bcm2835: add thermal driver to default_config   kernel at martin.sperl.org
• [PATCH v3 0/6] ARM: dts: bcm283x: add and use pinctrl groups   Gerd Hoffmann
  • [PATCH v3 1/6] pinctrl: bcm2835: add pull defines to dt bindings   Gerd Hoffmann
  • [PATCH v3 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Gerd Hoffmann
  • [PATCH v3 3/6] ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio   Gerd Hoffmann
  • [PATCH v3 4/6] ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio   Gerd Hoffmann
  • [PATCH v3 5/6] ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio   Gerd Hoffmann
  • [PATCH v3 6/6] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio   Gerd Hoffmann
    • [PATCH v3 6/6] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio   Stefan Wahren
• Multiple invocations of cron-job AT THE SAME MINUTE on Raspbian   Ajay Garg
  • Multiple invocations of cron-job AT THE SAME MINUTE on Raspbian   Ajay Garg
    • Multiple invocations of cron-job AT THE SAME MINUTE on Raspbian   Phil Elwell
      • Multiple invocations of cron-job AT THE SAME MINUTE on Raspbian   Ajay Garg
• [PATCH v4 0/7] ARM: dts: bcm283x: add and use pinctrl groups   Gerd Hoffmann
  • [PATCH v4 1/7] pinctrl: bcm2835: add pull defines to dt bindings   Gerd Hoffmann
    • [PATCH v4 1/7] pinctrl: bcm2835: add pull defines to dt bindings   Eric Anholt
      • [PATCH v4 1/7] pinctrl: bcm2835: add pull defines to dt bindings   Linus Walleij
  • [PATCH v4 2/7] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.   Gerd Hoffmann
  • [PATCH v4 3/7] ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio   Gerd Hoffmann
  • [PATCH v4 4/7] ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio   Gerd Hoffmann
  • [PATCH v4 5/7] ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio   Gerd Hoffmann
  • [PATCH v4 6/7] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio   Gerd Hoffmann
  • [PATCH v4 7/7] ARM: dts: bcm283x: drop alt3 from &gpio   Gerd Hoffmann
    • [PATCH v4 7/7] ARM: dts: bcm283x: drop alt3 from &gpio   Eric Anholt
  • [PATCH v4 0/7] ARM: dts: bcm283x: add and use pinctrl groups   Stefan Wahren
• [PATCH V6 0/6] thermal: bcm2835: add thermal driver   kernel at martin.sperl.org
  • [PATCH V6 1/6] dt: bindings: add thermal device driver for bcm2835   kernel at martin.sperl.org
  • [PATCH V6 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc   kernel at martin.sperl.org
    • [PATCH V6 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc   Stefan Wahren
      • [PATCH V6 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc   Stefan Wahren
  • [PATCH V6 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x   kernel at martin.sperl.org
  • [PATCH V6 4/6] ARM64: bcm2835: dts: add thermal node to device-tree of bcm2837   kernel at martin.sperl.org
  • [PATCH V6 5/6] ARM: bcm2835: add thermal driver to default_config   kernel at martin.sperl.org
  • [PATCH V6 6/6] ARM64: bcm2835: add thermal driver to default_config   kernel at martin.sperl.org
• [PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig   Eric Anholt
  • [PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig   Florian Fainelli
• [PATCH 1/3] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes   Noralf Trønnes
  • [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer   Noralf Trønnes
    • [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer   Martin Sperl
      • [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer   Noralf Trønnes
      • [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer   Martin Sperl
      • [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer   Noralf Trønnes
      • [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer   kernel at martin.sperl.org
      • [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer   Noralf Trønnes
  • [PATCH 1/3] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes   Eric Anholt
    • [PATCH 1/3] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes   Noralf Trønnes
  • [PATCH 1/3] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes   Martin Sperl
• [PATCH 3/3] i2c: bcm2835: Use ratelimited logging on transfer errors   Noralf Trønnes
• [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.   Eric Anholt
  • [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.   Eric Anholt
    • [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.   Linus Walleij
      • [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.   Eric Anholt
      • [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.   Linus Walleij
      • [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.   Eric Anholt
      • [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.   Stephen Warren
    • [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.   Stefan Wahren
  • [PATCH 3/3] arm64: Add the Raspberry Pi firmware's interface to the FXL6408.   Eric Anholt
    • [PATCH 3/3] arm64: Add the Raspberry Pi firmware's interface to the FXL6408.   Gerd Hoffmann
      • [PATCH 3/3] arm64: Add the Raspberry Pi firmware's interface to the FXL6408.   Linus Walleij
  • [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.   Linus Walleij
    • [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.   Eric Anholt
      • [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.   Linus Walleij
      • [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.   Stephen Warren
  • [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.   Stefan Wahren
    • [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.   Stephen Warren
      • [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.   Stefan Wahren
      • [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.   Stephen Warren
• [PATCH V7 0/6] thermal: bcm2835: add thermal driver   kernel at martin.sperl.org
  • [PATCH V7 1/6] dt: bindings: add thermal device driver for bcm2835   kernel at martin.sperl.org
  • [PATCH V7 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc   kernel at martin.sperl.org
    • [PATCH V7 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc   Eric Anholt
  • [PATCH V7 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x   kernel at martin.sperl.org
  • [PATCH V7 4/6] ARM64: bcm2835: dts: add thermal node to device-tree of bcm2837   kernel at martin.sperl.org
  • [PATCH V7 5/6] ARM: bcm2835: add thermal driver to default_config   kernel at martin.sperl.org
  • [PATCH V7 6/6] ARM64: bcm2835: add thermal driver to default_config   kernel at martin.sperl.org
• [PATCH] clocksource: bcm2835_timer: Unmap region obtained by of_iomap   Arvind Yadav
  • [PATCH] clocksource: bcm2835_timer: Unmap region obtained by of_iomap   Eric Anholt
• [GIT PULL] bcm2835-defconfig-64-next-2016-09-22   Eric Anholt
• [PATCH v2 0/8] i2c: bcm2835: Bring in changes from downstream   Noralf Trønnes
  • [PATCH v2 2/8] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts   Noralf Trønnes
  • [PATCH v2 4/8] i2c: bcm2835: Can't support I2C_M_IGNORE_NAK   Noralf Trønnes
  • [PATCH v2 5/8] i2c: bcm2835: Add support for Repeated Start Condition   Noralf Trønnes
• [PATCH v2 1/8] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes   Noralf Trønnes
• [PATCH v2 3/8] i2c: bcm2835: Use ratelimited logging on transfer errors   Noralf Trønnes
  • [PATCH v2 3/8] i2c: bcm2835: Use ratelimited logging on transfer errors   Martin Sperl
    • [PATCH v2 3/8] i2c: bcm2835: Use ratelimited logging on transfer errors   Noralf Trønnes
• [PATCH v2 6/8] i2c: bcm2835: Support i2c-dev ioctl I2C_TIMEOUT   Noralf Trønnes
• [PATCH v2 7/8] i2c: bcm2835: Add support for dynamic clock   Noralf Trønnes
• [PATCH v2 8/8] ARM: bcm2835: Disable i2c2 in the Device Tree   Noralf Trønnes
  • [PATCH v2 8/8] ARM: bcm2835: Disable i2c2 in the Device Tree   Stefan Wahren
    • [PATCH v2 8/8] ARM: bcm2835: Disable i2c2 in the Device Tree   Jan Kandziora
    • [PATCH v2 8/8] ARM: bcm2835: Disable i2c2 in the Device Tree   Noralf Trønnes
• [PATCH v3 0/7] i2c: bcm2835: Bring in changes from downstream   Noralf Trønnes
  • [PATCH v3 2/7] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts   Noralf Trønnes
    • [PATCH v3 2/7] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts   Eric Anholt
      • [PATCH v3 2/7] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts   Noralf Trønnes
      • [PATCH v3 2/7] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts   Stefan Wahren
  • [PATCH v3 5/7] i2c: bcm2835: Add support for Repeated Start Condition   Noralf Trønnes
  • [PATCH v3 6/7] i2c: bcm2835: Support i2c-dev ioctl I2C_TIMEOUT   Noralf Trønnes
  • [PATCH v3 7/7] i2c: bcm2835: Add support for dynamic clock   Noralf Trønnes
    • [PATCH v3 7/7] i2c: bcm2835: Add support for dynamic clock   Eric Anholt
      • [PATCH v3 7/7] i2c: bcm2835: Add support for dynamic clock   Noralf Trønnes
      • [PATCH v3 7/7] i2c: bcm2835: Add support for dynamic clock   Martin Sperl
• [PATCH v3 1/7] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes   Noralf Trønnes
• [PATCH v3 3/7] i2c: bcm2835: Use dev_dbg logging on transfer errors   Noralf Trønnes
  • [PATCH v3 3/7] i2c: bcm2835: Use dev_dbg logging on transfer errors   Martin Sperl
• [PATCH v3 4/7] i2c: bcm2835: Can't support I2C_M_IGNORE_NAK   Noralf Trønnes
• [PATCH] clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.   Stephen Boyd
  • [PATCH] clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.   Eric Anholt
• [PATCH v2] clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.   Eric Anholt

Last message date: Fri Sep 30 10:07:27 PDT 2016
Archived on: Sat Oct 1 00:37:40 PDT 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...