September 2016 Archives by subject
Starting: Thu Sep 1 07:10:29 PDT 2016
Ending: Fri Sep 30 10:07:27 PDT 2016
Messages: 213
- [GIT PULL] bcm2835-defconfig-64-next-2016-09-22
Eric Anholt
- [PATCH 0/8] ARM: dts: bcm283x: add and use pinctrl groups
Gerd Hoffmann
- [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.
Eric Anholt
- [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.
Linus Walleij
- [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.
Eric Anholt
- [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.
Linus Walleij
- [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.
Stefan Wahren
- [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.
Stephen Warren
- [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.
Stephen Warren
- [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.
Stefan Wahren
- [PATCH 1/3] dt-bindings: Add a binding for the RPi firmware GPIO driver.
Stephen Warren
- [PATCH 1/3] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes
Noralf Trønnes
- [PATCH 1/3] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes
Eric Anholt
- [PATCH 1/3] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes
Noralf Trønnes
- [PATCH 1/3] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes
Martin Sperl
- [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Gerd Hoffmann
- [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Stefan Wahren
- [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Eric Anholt
- [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Gerd Hoffmann
- [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Stefan Wahren
- [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Gerd Hoffmann
- [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Stefan Wahren
- [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Eric Anholt
- [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Dave Stevenson
- [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Eric Anholt
- [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.
Eric Anholt
- [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.
Linus Walleij
- [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.
Eric Anholt
- [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.
Linus Walleij
- [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.
Stefan Wahren
- [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.
Eric Anholt
- [PATCH 2/3] gpio: Add a driver for the Raspberry Pi's firmware GPIO calls.
Stephen Warren
- [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer
Noralf Trønnes
- [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer
Martin Sperl
- [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer
Noralf Trønnes
- [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer
Martin Sperl
- [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer
Noralf Trønnes
- [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer
kernel at martin.sperl.org
- [PATCH 2/3] i2c: bcm2835: Add support for combined write-read transfer
Noralf Trønnes
- [PATCH 2/5] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.
Gerd Hoffmann
- [PATCH 2/5] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.
Eric Anholt
- [PATCH 2/5] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.
Ulf Hansson
- [PATCH 2/8] ARM: dts: bcm283x: Add the emmc pin group to bcm283x.dtsi.
Gerd Hoffmann
- [PATCH 3/3] arm64: Add the Raspberry Pi firmware's interface to the FXL6408.
Eric Anholt
- [PATCH 3/3] arm64: Add the Raspberry Pi firmware's interface to the FXL6408.
Gerd Hoffmann
- [PATCH 3/3] arm64: Add the Raspberry Pi firmware's interface to the FXL6408.
Linus Walleij
- [PATCH 3/3] i2c: bcm2835: Use ratelimited logging on transfer errors
Noralf Trønnes
- [PATCH 3/8] ARM: dts: bcm283x: Add a group for mapping pins 48-53 to sdhost.
Gerd Hoffmann
- [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.
Gerd Hoffmann
- [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.
Stefan Wahren
- [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.
Gerd Hoffmann
- [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.
Stefan Wahren
- [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.
Scott Branden
- [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.
Stefan Wahren
- [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.
Gerd Hoffmann
- [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.
Gerd Hoffmann
- [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.
Scott Branden
- [PATCH 4/8] ARM: dts: bcm283x: Add a new EMMC pin group from the downstream tree.
Eric Anholt
- [PATCH 5/8] ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio
Gerd Hoffmann
- [PATCH 6/8] ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio
Gerd Hoffmann
- [PATCH 7/8] ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio
Gerd Hoffmann
- [PATCH 8/8] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
Gerd Hoffmann
- [PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
Eric Anholt
- [PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
Florian Fainelli
- [PATCH] char: hw_random: bcm2835: handle of_iomap failures in bcm2835 driver
Herbert Xu
- [PATCH] clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.
Eric Anholt
- [PATCH] clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.
Stephen Boyd
- [PATCH] clocksource: bcm2835_timer: Unmap region obtained by of_iomap
Arvind Yadav
- [PATCH] clocksource: bcm2835_timer: Unmap region obtained by of_iomap
Eric Anholt
- [PATCH] dt: assign uart0 to BT and uart1 to pin headers
Gerd Hoffmann
- [PATCH v2 0/6] ARM: dts: bcm283x: add and use pinctrl groups
Gerd Hoffmann
- [PATCH v2 0/8] i2c: bcm2835: Bring in changes from downstream
Noralf Trønnes
- [PATCH v2 1/2] ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
Ian Campbell
- [PATCH v2 1/2] ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
Arnd Bergmann
- [PATCH v2 1/2] ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
Ian Campbell
- [PATCH v2 1/6] pinctrl: bcm2835: add pull defines to dt bindings
Gerd Hoffmann
- [PATCH v2 1/8] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes
Noralf Trønnes
- [PATCH v2 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Gerd Hoffmann
- [PATCH v2 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Stefan Wahren
- [PATCH v2 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Stefan Wahren
- [PATCH v2 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Gerd Hoffmann
- [PATCH v2 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Gerd Hoffmann
- [PATCH v2 2/8] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts
Noralf Trønnes
- [PATCH v2 3/6] ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio
Gerd Hoffmann
- [PATCH v2 3/8] i2c: bcm2835: Use ratelimited logging on transfer errors
Noralf Trønnes
- [PATCH v2 3/8] i2c: bcm2835: Use ratelimited logging on transfer errors
Martin Sperl
- [PATCH v2 3/8] i2c: bcm2835: Use ratelimited logging on transfer errors
Noralf Trønnes
- [PATCH v2 4/6] ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio
Gerd Hoffmann
- [PATCH v2 4/8] i2c: bcm2835: Can't support I2C_M_IGNORE_NAK
Noralf Trønnes
- [PATCH v2 5/6] ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio
Gerd Hoffmann
- [PATCH v2 5/8] i2c: bcm2835: Add support for Repeated Start Condition
Noralf Trønnes
- [PATCH v2 6/6] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
Gerd Hoffmann
- [PATCH v2 6/6] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
Stefan Wahren
- [PATCH v2 6/8] i2c: bcm2835: Support i2c-dev ioctl I2C_TIMEOUT
Noralf Trønnes
- [PATCH v2 7/8] i2c: bcm2835: Add support for dynamic clock
Noralf Trønnes
- [PATCH v2 8/8] ARM: bcm2835: Disable i2c2 in the Device Tree
Noralf Trønnes
- [PATCH v2 8/8] ARM: bcm2835: Disable i2c2 in the Device Tree
Stefan Wahren
- [PATCH v2 8/8] ARM: bcm2835: Disable i2c2 in the Device Tree
Jan Kandziora
- [PATCH v2 8/8] ARM: bcm2835: Disable i2c2 in the Device Tree
Noralf Trønnes
- [PATCH v2] clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.
Eric Anholt
- [PATCH v3 0/4] clk: bcm2835: critical clocks and parent selection
Martin Sperl
- [PATCH v3 0/4] clk: bcm2835: critical clocks and parent selection
Stephen Boyd
- [PATCH v3 0/6] ARM: dts: bcm283x: add and use pinctrl groups
Gerd Hoffmann
- [PATCH v3 0/7] i2c: bcm2835: Bring in changes from downstream
Noralf Trønnes
- [PATCH v3 1/6] pinctrl: bcm2835: add pull defines to dt bindings
Gerd Hoffmann
- [PATCH v3 1/7] i2c: bcm2835: Fix hang for writing messages larger than 16 bytes
Noralf Trønnes
- [PATCH v3 2/6] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Gerd Hoffmann
- [PATCH v3 2/7] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts
Noralf Trønnes
- [PATCH v3 2/7] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts
Eric Anholt
- [PATCH v3 2/7] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts
Noralf Trønnes
- [PATCH v3 2/7] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts
Stefan Wahren
- [PATCH v3 3/6] ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio
Gerd Hoffmann
- [PATCH v3 3/7] i2c: bcm2835: Use dev_dbg logging on transfer errors
Noralf Trønnes
- [PATCH v3 3/7] i2c: bcm2835: Use dev_dbg logging on transfer errors
Martin Sperl
- [PATCH v3 4/6] ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio
Gerd Hoffmann
- [PATCH v3 4/7] i2c: bcm2835: Can't support I2C_M_IGNORE_NAK
Noralf Trønnes
- [PATCH v3 5/6] ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio
Gerd Hoffmann
- [PATCH v3 5/7] i2c: bcm2835: Add support for Repeated Start Condition
Noralf Trønnes
- [PATCH v3 6/6] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
Gerd Hoffmann
- [PATCH v3 6/6] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
Stefan Wahren
- [PATCH v3 6/7] i2c: bcm2835: Support i2c-dev ioctl I2C_TIMEOUT
Noralf Trønnes
- [PATCH v3 7/7] i2c: bcm2835: Add support for dynamic clock
Noralf Trønnes
- [PATCH v3 7/7] i2c: bcm2835: Add support for dynamic clock
Eric Anholt
- [PATCH v3 7/7] i2c: bcm2835: Add support for dynamic clock
Noralf Trønnes
- [PATCH v3 7/7] i2c: bcm2835: Add support for dynamic clock
Martin Sperl
- [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode
Gerd Hoffmann
- [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode
Stefan Wahren
- [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode
Gerd Hoffmann
- [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode
Stefan Wahren
- [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode
Eric Anholt
- [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode
Stefan Wahren
- [PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode
Eric Anholt
- [PATCH V4 0/4] thermal: bcm2835: add thermal driver
kernel at martin.sperl.org
- [PATCH v4 0/7] ARM: dts: bcm283x: add and use pinctrl groups
Gerd Hoffmann
- [PATCH v4 0/7] ARM: dts: bcm283x: add and use pinctrl groups
Stefan Wahren
- [PATCH V4 1/4] dt: bindings: add thermal device driver for bcm2835
kernel at martin.sperl.org
- [PATCH v4 1/7] pinctrl: bcm2835: add pull defines to dt bindings
Gerd Hoffmann
- [PATCH v4 1/7] pinctrl: bcm2835: add pull defines to dt bindings
Eric Anholt
- [PATCH v4 1/7] pinctrl: bcm2835: add pull defines to dt bindings
Linus Walleij
- [PATCH V4 2/4] thermal: bcm2835: add thermal driver for bcm2835 soc
kernel at martin.sperl.org
- [PATCH V4 2/4] thermal: bcm2835: add thermal driver for bcm2835 soc
Eric Anholt
- [PATCH v4 2/7] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Gerd Hoffmann
- [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x
kernel at martin.sperl.org
- [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x
Stefan Wahren
- [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x
Martin Sperl
- [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x
Stefan Wahren
- [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x
Martin Sperl
- [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x
Stefan Wahren
- [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x
Martin Sperl
- [PATCH V4 3/4] ARM: bcm2835: add thermal node to device-tree of bcm283x
Stefan Wahren
- [PATCH v4 3/7] ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio
Gerd Hoffmann
- [PATCH V4 4/4] ARM: bcm2835: add thermal driver to default_config
kernel at martin.sperl.org
- [PATCH v4 4/7] ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio
Gerd Hoffmann
- [PATCH v4 5/7] ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio
Gerd Hoffmann
- [PATCH v4 6/7] ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
Gerd Hoffmann
- [PATCH v4 7/7] ARM: dts: bcm283x: drop alt3 from &gpio
Gerd Hoffmann
- [PATCH v4 7/7] ARM: dts: bcm283x: drop alt3 from &gpio
Eric Anholt
- [PATCH v5 0/3] usb: dwc2: Fix core reset and force mode delays
John Youn
- [PATCH V5 0/6] thermal: bcm2835: add thermal driver
kernel at martin.sperl.org
- [PATCH v5 1/3] usb: dwc2: gadget: Only initialize device if in device mode
John Youn
- [PATCH V5 1/6] dt: bindings: add thermal device driver for bcm2835
kernel at martin.sperl.org
- [PATCH v5 2/3] usb: dwc2: Add delay to core soft reset
John Youn
- [PATCH V5 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc
kernel at martin.sperl.org
- [PATCH V5 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc
Eric Anholt
- [PATCH V5 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc
Stefan Wahren
- [PATCH V5 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc
kernel at martin.sperl.org
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
John Youn
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
Heiko Stuebner
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
Stefan Wahren
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
Heiko Stuebner
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
Stefan Wahren
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
Heiko Stübner
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
John Youn
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
Heiko Stübner
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
John Youn
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
Stefan Wahren
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
John Youn
- [PATCH v5 3/3] usb: dwc2: Properly account for the force mode delays
John Youn
- [PATCH V5 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
kernel at martin.sperl.org
- [PATCH V5 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
Stefan Wahren
- [PATCH V5 4/6] ARM64: bcm2835: dts: add thermal node to device-tree of bcm2837
kernel at martin.sperl.org
- [PATCH V5 5/6] ARM: bcm2835: add thermal driver to default_config
kernel at martin.sperl.org
- [PATCH V5 6/6] ARM64: bcm2835: add thermal driver to default_config
kernel at martin.sperl.org
- [PATCH V6 0/6] thermal: bcm2835: add thermal driver
kernel at martin.sperl.org
- [PATCH V6 1/6] dt: bindings: add thermal device driver for bcm2835
kernel at martin.sperl.org
- [PATCH V6 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc
kernel at martin.sperl.org
- [PATCH V6 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc
Stefan Wahren
- [PATCH V6 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc
Stefan Wahren
- [PATCH V6 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
kernel at martin.sperl.org
- [PATCH V6 4/6] ARM64: bcm2835: dts: add thermal node to device-tree of bcm2837
kernel at martin.sperl.org
- [PATCH V6 5/6] ARM: bcm2835: add thermal driver to default_config
kernel at martin.sperl.org
- [PATCH V6 6/6] ARM64: bcm2835: add thermal driver to default_config
kernel at martin.sperl.org
- [PATCH V7 0/6] thermal: bcm2835: add thermal driver
kernel at martin.sperl.org
- [PATCH V7 1/6] dt: bindings: add thermal device driver for bcm2835
kernel at martin.sperl.org
- [PATCH V7 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc
kernel at martin.sperl.org
- [PATCH V7 2/6] thermal: bcm2835: add thermal driver for bcm2835 soc
Eric Anholt
- [PATCH V7 3/6] ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
kernel at martin.sperl.org
- [PATCH V7 4/6] ARM64: bcm2835: dts: add thermal node to device-tree of bcm2837
kernel at martin.sperl.org
- [PATCH V7 5/6] ARM: bcm2835: add thermal driver to default_config
kernel at martin.sperl.org
- [PATCH V7 6/6] ARM64: bcm2835: add thermal driver to default_config
kernel at martin.sperl.org
- [RFC 00/17] clk: Add per-controller locks to fix deadlocks
Stephen Boyd
- [RFT PATCH v4 0/3] usb: dwc2: Fix core reset and force mode delays
John Youn
- [RFT PATCH v4 0/3] usb: dwc2: Fix core reset and force mode delays
Stefan Wahren
- [RFT PATCH v4 0/3] usb: dwc2: Fix core reset and force mode delays
Felipe Balbi
- [RFT PATCH v4 1/3] usb: dwc2: gadget: Only initialize device if in device mode
John Youn
- [RFT PATCH v4 2/3] usb: dwc2: Add delay to core soft reset
John Youn
- [RFT PATCH v4 3/3] usb: dwc2: Properly account for the force mode delays
John Youn
- Multiple invocations of cron-job AT THE SAME MINUTE on Raspbian
Ajay Garg
- Multiple invocations of cron-job AT THE SAME MINUTE on Raspbian
Ajay Garg
- Multiple invocations of cron-job AT THE SAME MINUTE on Raspbian
Phil Elwell
- Multiple invocations of cron-job AT THE SAME MINUTE on Raspbian
Ajay Garg
- 享受精致服务——特殊的尊贵权限,只在澳门金沙集团 VIP culb!(AD)
baiweiguan
- 全民VIP强势来袭2016您就是VIP,属于您的至尊赌场,澳门金沙集团!(AD)
oujujian
Last message date:
Fri Sep 30 10:07:27 PDT 2016
Archived on: Sat Oct 1 00:37:40 PDT 2016
This archive was generated by
Pipermail 0.09 (Mailman edition).