August 2020 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun Aug 2 06:40:41 EDT 2020
Ending: Mon Aug 31 08:20:21 EDT 2020
Messages: 312

• [PATCH 0/2] ARM: i.MX: Add support for IMX7 based board   Anees Rehman
• [PATCH 0/3] squashfs: Fix current master   Sascha Hauer
• [PATCH 01/20] Introduce slices   Sascha Hauer
• [PATCH 02/20] Add workqueues   Sascha Hauer
• [PATCH 03/20] ratp: Switch to workqueues   Sascha Hauer
• [PATCH 04/11] fs: free inodes we no longer need   Ahmad Fatoum
• [PATCH 04/11] fs: free inodes we no longer need   Sascha Hauer
• [PATCH 04/20] net: Add a slice to struct eth_device   Sascha Hauer
• [PATCH 05/20] net: mdiobus: Add slice   Sascha Hauer
• [PATCH 06/20] usb: Add a slice to usb host controllers   Sascha Hauer
• [PATCH 07/20] usbnet: Add slice   Sascha Hauer
• [PATCH 08/20] net: Call net_poll() in a poller   Sascha Hauer
• [PATCH 09/20] net: reply to ping requests   Sascha Hauer
• [PATCH 1/2] ARM: imx8m: Make uart setup function name more generic   Sascha Hauer
• [PATCH 1/2] clk: imx: remove leftover debug printk's from pll14xx   Lucas Stach
• [PATCH 1/2] mci: imx-esdhc-pbl: Add support for IMX7   Anees Rehman
• [PATCH 1/2] ratp: Abort console_countdown when activated   Sascha Hauer
• [PATCH 1/2] treewide: s/filed/failed/   Sascha Hauer
• [PATCH 1/3] ARM: i.MX6 dtsi: add enet_out clock   Marco Felsch
• [PATCH 1/3] ARM: vexpress: set stdout path   Lucas Stach
• [PATCH 1/3] ARM: vexpress: set stdout path   Sascha Hauer
• [PATCH 1/3] fs: squashfs: set s_op in time   Sascha Hauer
• [PATCH 1/3] i2c: sync i2c_parse_fw_timings() with upstream   Sascha Hauer
• [PATCH 1/3] video: add simple, transparent, bridge implementation   Ahmad Fatoum
• [PATCH 1/3] video: add simple, transparent, bridge implementation   Sam Ravnborg
• [PATCH 1/3] video: add simple, transparent, bridge implementation   Ahmad Fatoum
• [PATCH 1/3] video: add simple, transparent, bridge implementation   Sam Ravnborg
• [PATCH 1/3] video: add simple, transparent, bridge implementation   Ahmad Fatoum
• [PATCH 1/5] clk: imx7: add IMX7D_OCOTP_CLK   Sascha Hauer
• [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir-   Masahiro Yamada
• [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir-   Sascha Hauer
• [PATCH 1/7] clk: imx: make string arrays const char * const *   Sascha Hauer
• [PATCH 10/20] usbnet: Be more friendly in the receive path   Sascha Hauer
• [PATCH 11/20] globalvar: Add helper for deprecated variable names   Sascha Hauer
• [PATCH 12/20] fastboot: rename usbgadget.fastboot_* variables to fastboot.*   Sascha Hauer
• [PATCH 13/20] fastboot: Warn when cb_download is called with file still open   Sascha Hauer
• [PATCH 14/20] fastboot: Add fastboot_abort()   Sascha Hauer
• [PATCH 15/20] fastboot: init list head in common   Sascha Hauer
• [PATCH 16/20] fastboot net: implement fastboot over UDP   Sascha Hauer
• [PATCH 17/20] usb: fastboot: execute commands in command context   Sascha Hauer
• [PATCH 17/21] fastboot net: implement fastboot over UDP   Sascha Hauer
• [PATCH 18/20] Add WARN_ONCE() macro   Sascha Hauer
• [PATCH 19/20] fs: Warn when filesystem operations are called from a poller   Sascha Hauer
• [PATCH 2/2] ARM: i.MX8M boards: always set up UART   Sascha Hauer
• [PATCH 2/2] ARM: i.MX: Add atlascopco sxb board   Anees Rehman
• [PATCH 2/2] ARM: i.MX: Add atlascopco sxb board   Ahmad Fatoum
• [PATCH 2/2] clk: imx8mm: fix CPU clock   Lucas Stach
• [PATCH 2/2] clk: imx8mm: fix CPU clock   Sascha Hauer
• [PATCH 2/2] treewide: s/filed/field/   Sascha Hauer
• [PATCH 2/3] ARM: imx6ul: add fec bits to GPR syscon definition   Marco Felsch
• [PATCH 2/3] ARM: vexpress: allow to select debug UART address   Lucas Stach
• [PATCH 2/3] ARM: vexpress: allow to select debug UART address   Sascha Hauer
• [PATCH 2/3] fs: squashfs: Do not free root inode   Sascha Hauer
• [PATCH 2/3] video: ipuv3: parallel-display: support of_graph binding   Ahmad Fatoum
• [PATCH 2/3] video: ipuv3: parallel-display: support of_graph binding   Sascha Hauer
• [PATCH 2/4] ARM: imx8m: make debug UART selection available on i.MX8MM   Sascha Hauer
• [PATCH 2/5] kvx,riscv: remove unused $(dtb-y) assignment   Masahiro Yamada
• [PATCH 2/7] clk: imx: clk-pll14xx: remove debug leftover   Sascha Hauer
• [PATCH 20/20] Documentation: Add document about background execution in barebox   Sascha Hauer
• [PATCH 3/3] ARM: i.MX: setup ENET_CLK_SEL in imx6_init for every imx6q/imx6d   Marco Felsch
• [PATCH 3/3] ARM: i.MX: setup ENET_CLK_SEL in imx6_init for every imx6q/imx6d   Sascha Hauer
• [PATCH 3/3] ARM: i.MX: setup ENET_CLK_SEL in imx6_init for every imx6q/imx6d   Marco Felsch
• [PATCH 3/3] ARM: vexpress: enable KALLSYMS in defconfig   Lucas Stach
• [PATCH 3/3] fs: Use iget_locked() rather than squashfs specific function   Sascha Hauer
• [PATCH 3/3] video: simple-panel: don't error out on unhandled ioctl command   Ahmad Fatoum
• [PATCH 3/5] sandbox: add sandbox.dtb to always-y   Masahiro Yamada
• [PATCH 3/7] clk: imx-cpu: Add missing CLK_IS_CRITICAL   Sascha Hauer
• [PATCH 4/5] kbuild: sync the top level Kbuild file with Linux   Masahiro Yamada
• [PATCH 4/7] clk: imx. clk-composite-8m: Update from Linux Kernel   Sascha Hauer
• [PATCH 5/5] kbuild: introduce hostprogs-always-y and userprogs-always-y   Masahiro Yamada
• [PATCH 5/7] clk: imx: Add imx_clk_gate4_flags   Sascha Hauer
• [PATCH 6/7] clk: imx: Add Linux function names   Sascha Hauer
• [PATCH 7/7] clk: imx8mp: update clk driver from Linux kernel   Sascha Hauer
• [PATCH] add untar command   yegorslists at googlemail.com
• [PATCH] add untar command   Sascha Hauer
• [PATCH] ARM: at91: pass along bootsource to netbooted barebox   Sascha Hauer
• [PATCH] arm: baltos: export DIP switch value   Sascha Hauer
• [PATCH] ARM: boards: phytec-som-imx6: Add mmc and emmc-boot bbu update handler   Sascha Hauer
• [PATCH] arm: imx: RELOCATABLE default yes on IMX_MULTI_BOARDS   Lars Pedersen
• [PATCH] arm: imx: RELOCATABLE default yes on IMX_MULTI_BOARDS   Sascha Hauer
• [PATCH] ARM: imx_v8_defconfig: Enabel realtek phy   Sascha Hauer
• [PATCH] ARM: Layerscape: TQMLS1046a: remove ddr calc code   Rouven Czerwinski
• [PATCH] ARM: Layerscape: TQMLS1046a: remove ddr calc code   Sascha Hauer
• [PATCH] ARM: socfpga: achilles: remove unused barebox,bootstate node   Ahmad Fatoum
• [PATCH] ARM: socfpga: achilles: remove unused barebox,bootstate node   Sascha Hauer
• [PATCH] ARM: stm32mp: add support for Seeed Odyssey board   Sascha Hauer
• [PATCH] bootm: add global.bootm.root_dev env var for booting via PARTUUID   Robert Karszniewicz
• [PATCH] clk: imx-imx8mp: Mark arm_a53_core clk as critical   Sascha Hauer
• [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux   Peter Mamonov
• [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux   Roland Hieber
• [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux   Sascha Hauer
• [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux   Peter Mamonov
• [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux   Peter Mamonov
• [PATCH] common: remove negative dependency on SANDBOX for IMD_TARGET   Roland Hieber
• [PATCH] common: remove negative dependency on SANDBOX for IMD_TARGET   Sascha Hauer
• [PATCH] console_countdown: Add CR as valid return key   Sascha Hauer
• [PATCH] console_countdown: Add CR as valid return key   Jules Maselbas
• [PATCH] console_countdown: Add CR as valid return key   Sascha Hauer
• [PATCH] ddr: imx: Cleanup debug messages   Sascha Hauer
• [PATCH] Documentation/sandbox: fix code block   Sascha Hauer
• [PATCH] Documentation: boards: stm32mp: document eMMC boot configuration   Bastian Krause
• [PATCH] Documentation: update for loongson1 board   Du Huanpeng
• [PATCH] Documentation: update for loongson1 board   Sascha Hauer
• [PATCH] Documentation: update for loongson1 board   Du Huanpeng
• [PATCH] dtc_cpp: allow to pass options per target   Sascha Hauer
• [PATCH] fixup! of: base: register DT root as device   Oleksij Rempel
• [PATCH] gpio: get function returns masked register value   Sascha Hauer
• [PATCH] image: Convert the IH_... values to enums   Antony Pavlov
• [PATCH] image: Convert the IH_... values to enums   Sascha Hauer
• [PATCH] kconfig: update to Linux 5.9-rc2   Masahiro Yamada
• [PATCH] kvx: exclude dtb from malloc zone   Clément Leger
• [PATCH] kvx: exclude dtb from malloc zone   Sascha Hauer
• [PATCH] libfile: copy_file: Fix ftruncate called on device files   Sascha Hauer
• [PATCH] mci: core: add device parameter for eMMC boot ack   Jan Lübbe
• [PATCH] of: base: move memory init from DT to initcall   Lucas Stach
• [PATCH] of: base: move memory init from DT to initcall   Sascha Hauer
• [PATCH] Revert "usb: host: ehci: Use to USBSTS to wait for transfer completion"   Christian Eggers
• [PATCH] Revert "usb: host: ehci: Use to USBSTS to wait for transfer completion"   Sascha Hauer
• [PATCH] riscv: Makefile: make it possible to use riscv64 compiler   Antony Pavlov
• [PATCH] sandbox: add a minimal defconfig to build only the host tools   Roland Hieber
• [PATCH] scripts/rsatoc: fix printing of error message, if environment variable doen't contain a path   Sascha Hauer
• [PATCH] spi: add coredevice_spi_driver macro as well   Ahmad Fatoum
• [PATCH] spi: add coredevice_spi_driver macro as well   Sascha Hauer
• [PATCH] startup: Add missing newline to notice message   Sascha Hauer
• [PATCH] treewide: remove stale instances of struct device   Sascha Hauer
• [PATCH] treewide: remove stale instances of struct device   Masahiro Yamada
• [PATCH] treewide: remove stale instances of struct device   Sascha Hauer
• [PATCH] USB: gadget: Add serialnumber device parameter   Sascha Hauer
• [PATCH] video: ssd1307fb: Honour reset GPIO polarity   Sascha Hauer
• [PATCH] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd   Ahmad Fatoum
• [PATCH] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd   Sascha Hauer
• [PATCH] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd   Ahmad Fatoum
• [PATCH] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd   Sascha Hauer
• [PATCH] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd   Sascha Hauer
• [PATCH fixup v1] of: base: register DT root as device   Oleksij Rempel
• [PATCH fixup v1] of: base: register DT root as device   Sascha Hauer
• [PATCH fixup v1] of: base: register DT root as device   Ahmad Fatoum
• [PATCH fixup v1] of: base: register DT root as device   Ahmad Fatoum
• [PATCH fixup v1] of: base: register DT root as device   Oleksij Rempel
• [PATCH fixup v1] of: base: register DT root as device   Ahmad Fatoum
• [PATCH fixup v1] of: base: register DT root as device   Oleksij Rempel
• [PATCH fixup v1] of: base: register DT root as device   Ahmad Fatoum
• [PATCH fixup v1] of: base: register DT root as device   Lucas Stach
• [PATCH fixup v1] of: base: register DT root as device   Oleksij Rempel
• [PATCH fixup v1] of: base: register DT root as device   Sascha Hauer
• [PATCH master] i2c: stm32: support new st,stm32mp15-i2c compatible   Sascha Hauer
• [PATCH v1 06/11] net: fec_imx: use of_get_mac_address() to get mac address out of DT   Sascha Hauer
• [PATCH v1 06/11] net: fec_imx: use of_get_mac_address() to get mac address out of DT   Oleksij Rempel
• [PATCH v1 08/11] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array   Sascha Hauer
• [PATCH v1 08/11] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array   Oleksij Rempel
• [PATCH v1 09/11] ARM: protonic-imx6: port protonic specific board code   Sascha Hauer
• [PATCH v1 09/11] ARM: protonic-imx6: port protonic specific board code   Oleksij Rempel
• [PATCH v1 11/11] ARM: dts: imx6q-prti6q: add barebox.serial node   Sascha Hauer
• [PATCH v1 11/11] ARM: dts: imx6q-prti6q: add barebox.serial node   Oleksij Rempel
• [PATCH v1 11/11] ARM: dts: imx6q-prti6q: add barebox.serial node   Sascha Hauer
• [PATCH v1] serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-time" is present   Oleksij Rempel
• [PATCH v1] serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-time" is present   Ahmad Fatoum
• [PATCH v1] string: add sanity check to the strcmp() and strncmp()   Oleksij Rempel
• [PATCH v1] string: add sanity check to the strcmp() and strncmp()   Sascha Hauer
• [PATCH v2 0/2] ARM: i.MX: Add support for IMX7 based board   Anees Rehman
• [PATCH v2 0/2] ARM: i.MX: Add support for IMX7 based board   Sascha Hauer
• [PATCH v2 00/13] prepare Protonic board code for mainline   Oleksij Rempel
• [PATCH v2 00/13] prepare Protonic board code for mainline   Sascha Hauer
• [PATCH v2 01/13] ARM: dts: imx6q-prti6q: fix PHY register   Oleksij Rempel
• [PATCH v2 02/13] ARM: dts: imx6: vicut1: fix network support   Oleksij Rempel
• [PATCH v2 03/13] of: base: register DT root as device   Oleksij Rempel
• [PATCH v2 04/13] ARM: embest-riotboard: port board file to the driver model   Oleksij Rempel
• [PATCH v2 05/13] net: port nvmem_get_mac_address() from linux kernel   Oleksij Rempel
• [PATCH v2 06/13] of: of_net: sync of_get_mac_address() with latest kernel version   Oleksij Rempel
• [PATCH v2 07/13] net: fec_imx: use of_get_mac_address() to get mac address out of DT   Oleksij Rempel
• [PATCH v2 08/13] of: of_device_get_match_compatible() helper   Oleksij Rempel
• [PATCH v2 09/13] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array   Oleksij Rempel
• [PATCH v2 1/2] mci: imx-esdhc-pbl: Add support for IMX7   Anees Rehman
• [PATCH v2 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK   Lucas Stach
• [PATCH v2 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK   Sascha Hauer
• [PATCH v2 10/13] common: console_common: add of_console_get_by_alias() helper   Oleksij Rempel
• [PATCH v2 11/13] ARM: protonic-imx6: port Protonic specific board code   Oleksij Rempel
• [PATCH v2 12/13] of: add barebox-serial driver   Oleksij Rempel
• [PATCH v2 12/13] of: add barebox-serial driver   Sascha Hauer
• [PATCH v2 12/13] of: add barebox-serial driver   Oleksij Rempel
• [PATCH v2 12/13] of: add barebox-serial driver   David Jander
• [PATCH v2 13/13] ARM: dts: imx6q-prti6q: add barebox, serial-number node   Oleksij Rempel
• [PATCH v2 2/2] ARM: i.MX: Add atlascopco sxb board   Anees Rehman
• [PATCH v2 2/2] ARM: i.MX: Add atlascopco sxb board   Marco Felsch
• [PATCH v2 2/2] ARM: i.MX: Add atlascopco sxb board   Anees Rehman
• [PATCH v2 2/2] ARM: i.MX: Add atlascopco sxb board   Marco Felsch
• [PATCH v2 2/4] ARM: imx8m: make debug UART selection available on i.MX8MM/MP   Lucas Stach
• [PATCH v2 3/4] ARM: nxp-imx8mm-evk: always set up UART   Lucas Stach
• [PATCH v2 4/4] nvmem: ocotp: add support for i.MX8MM   Lucas Stach
• [PATCH v2] arm: baltos: add environment node   Sascha Hauer
• [PATCH v2] arm: imx: Select RELOCATABLE on IMX_MULTI_BOARDS   Lars Pedersen
• [PATCH v2] arm: imx: Select RELOCATABLE on IMX_MULTI_BOARDS   Sascha Hauer
• [PATCH v2] bootm: add global.bootm.root_dev env var for booting via PARTUUID   Robert Karszniewicz
• [PATCH v2] Documentation: update for loongson1 board   Du Huanpeng
• [PATCH v2] sandbox: add a minimal defconfig to build only the host tools   Roland Hieber
• [PATCH v2] sandbox: add a minimal defconfig to build only the host tools   Sascha Hauer
• [PATCH v2] sandbox: add a minimal defconfig to build only the host tools   Antony Pavlov
• [PATCH v2] sandbox: add a minimal defconfig to build only the host tools   Roland Hieber
• [PATCH v2] serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-time" is present   Oleksij Rempel
• [PATCH v2] serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-time" is present   Sascha Hauer
• [PATCH v2] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd   Ahmad Fatoum
• [PATCH v2] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd   Sascha Hauer
• [PATCH v3 0/6] prepare Protonic board code for mainline   Oleksij Rempel
• [PATCH v3 00/14] usb: dwc2: Add host and gadget driver   Sascha Hauer
• [PATCH v3 02/14] usb: dwc2: Add host controller driver   Sascha Hauer
• [PATCH v3 1/6] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array   Oleksij Rempel
• [PATCH v3 14/14] usb: dwc2: Add ulpi phy function   Sascha Hauer
• [PATCH v3 14/14] usb: dwc2: Add ulpi phy function   Jules Maselbas
• [PATCH v3 2/6] common: console_common: add of_console_get_by_alias() helper   Oleksij Rempel
• [PATCH v3 3/6] of: of_device_get_match_compatible() helper   Oleksij Rempel
• [PATCH v3 4/6] ARM: protonic-imx6: port Protonic specific board code   Oleksij Rempel
• [PATCH v3 4/6] ARM: protonic-imx6: port Protonic specific board code   David Jander
• [PATCH v3 4/6] ARM: protonic-imx6: port Protonic specific board code   Oleksij Rempel
• [PATCH v3 5/6] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards   Oleksij Rempel
• [PATCH v3 6/6] ARM: dts: imx6q-prti6q: add pstore/ramoops node   Oleksij Rempel
• [PATCH v3] bootm: add global.bootm.root_dev env var for booting via PARTUUID   Robert Karszniewicz
• [PATCH v3] bootm: add global.bootm.root_dev env var for booting via PARTUUID   Robert Karszniewicz
• [PATCH v3] bootm: add global.bootm.root_dev env var for booting via PARTUUID   Sascha Hauer
• [PATCH v3] bootm: add global.bootm.root_dev env var for booting via PARTUUID   Robert Karszniewicz
• [PATCH v4 0/7] prepare Protonic board code for mainline   Oleksij Rempel
• [PATCH v4 00/13] usb: dwc2: Add host and gadget driver   Jules Maselbas
• [PATCH v4 00/13] usb: dwc2: Add host and gadget driver   Sascha Hauer
• [PATCH v4 01/13] Revert "usb: Add dwc2 host driver"   Jules Maselbas
• [PATCH v4 02/13] usb: dwc2: Add host controller driver   Jules Maselbas
• [PATCH v4 02/13] usb: dwc2: Add host controller driver   Sascha Hauer
• [PATCH v4 02/13] usb: dwc2: Add host controller driver   Jules Maselbas
• [PATCH v4 02/13] usb: dwc2: Add host controller driver   Sascha Hauer
• [PATCH v4 03/13] usb: dwc2: host: Read dr_mode from device tree   Jules Maselbas
• [PATCH v4 04/13] usb: dwc2: Rework roothub interface   Jules Maselbas
• [PATCH v4 05/13] usb: dwc2: Rework timeout   Jules Maselbas
• [PATCH v4 06/13] usb: dwc2: host: Handle dma mapping errors   Jules Maselbas
• [PATCH v4 07/13] usb: dwc2: host: Dynamic fifo size support from Linux   Jules Maselbas
• [PATCH v4 08/13] usb: dwc2: host: Fix toggle reset   Jules Maselbas
• [PATCH v4 09/13] usb: dwc2: host: Rewrite dwc2_hc_init   Jules Maselbas
• [PATCH v4 1/7] of: base: register DT root as device   Oleksij Rempel
• [PATCH v4 10/13] usb: dwc2: Add function to flush tx fifo   Jules Maselbas
• [PATCH v4 11/13] usb: dwc2: Add structure for gadget driver   Jules Maselbas
• [PATCH v4 12/13] usb: dwc2: Add gadget driver   Jules Maselbas
• [PATCH v4 13/13] usb: dwc2: Use register_otg_device   Jules Maselbas
• [PATCH v4 2/3] of: base: register DT root as device   Ahmad Fatoum
• [PATCH v4 2/7] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array   Oleksij Rempel
• [PATCH v4 3/7] common: console_common: add of_console_get_by_alias() helper   Oleksij Rempel
• [PATCH v4 4/7] of: of_device_get_match_compatible() helper   Oleksij Rempel
• [PATCH v4 5/7] ARM: protonic-imx6: port Protonic specific board code   Oleksij Rempel
• [PATCH v4 5/7] ARM: protonic-imx6: port Protonic specific board code   Sascha Hauer
• [PATCH v4 5/7] ARM: protonic-imx6: port Protonic specific board code   David Jander
• [PATCH v4 6/7] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards   Oleksij Rempel
• [PATCH v4 7/7] ARM: dts: imx6q-prti6q: add pstore/ramoops node   Oleksij Rempel
• [PATCH v5 00/12] prepare Protonic board code for mainline   Oleksij Rempel
• [PATCH v5 00/12] prepare Protonic board code for mainline   Sascha Hauer
• [PATCH v5 01/12] of: base: register DT root as device   Oleksij Rempel
• [PATCH v5 02/12] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array   Oleksij Rempel
• [PATCH v5 03/12] common: console_common: add of_console_get_by_alias() helper   Oleksij Rempel
• [PATCH v5 04/12] of: of_device_get_match_compatible() helper   Oleksij Rempel
• [PATCH v5 05/12] ARM: protonic-imx6: port Protonic specific board code   Oleksij Rempel
• [PATCH v5 06/12] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards   Oleksij Rempel
• [PATCH v5 07/12] ARM: dts: imx6q-prti6q: add pstore/ramoops node   Oleksij Rempel
• [PATCH v5 08/12] ARM: dts: protonic: lanmcu: add eMMC partition table   Oleksij Rempel
• [PATCH v5 09/12] ARM: dts: protonic: add fixed clock for the FEC node   Oleksij Rempel
• [PATCH v5 10/12] ARM: dts: protonic: lanmcu: use UART_CTS instead of GPIO based CTS   Oleksij Rempel
• [PATCH v5 11/12] ARM: dts: protonic: properly define PHY nodes on lanmcu and plym2m boards   Oleksij Rempel
• [PATCH v5 12/12] ARM: dts: protonic: lanmcu: add uart-has-rtscts to enable rs485 functionality   Oleksij Rempel
• [PATCH v5] FIT: Parse `load` and `entry` addresses.   Sascha Hauer
• [PATCH v5] FIT: Parse `load` and `entry` addresses.   Christian Mauderer
• [PATCH v5] FIT: Parse `load` and `entry` addresses.   Sascha Hauer
• [PATCH v5] FIT: Parse `load` and `entry` addresses.   Christian Mauderer
• [PATCH v5] FIT: Parse `load` and `entry` addresses.   Sascha Hauer
• [PATCH v6 00/20] Slices and fastboot over UDP   Sascha Hauer
• [PATCH v6] FIT: Parse `load` and `entry` addresses.   Christian Mauderer
• [PATCH v6] FIT: Parse `load` and `entry` addresses.   Sascha Hauer
• [RFC] ARM: run barebox on STM32F429 MCU   Antony Pavlov
• [RFC PATCH v2 0/3] Introduce global.bootm.root_dev env var for booting via PARTUUID   Robert Karszniewicz
• [RFC PATCH v2 1/3] bootm: add env var root_dev   Robert Karszniewicz
• [RFC PATCH v2 2/3] globalvar: add bootm.root_dev   Robert Karszniewicz
• [RFC PATCH v2 3/3] bootm: handle global.bootm.root_dev   Robert Karszniewicz
• [RFC PATCH v2 3/3] bootm: handle global.bootm.root_dev   Robert Karszniewicz
• [RFC PATCH v2 3/3] bootm: handle global.bootm.root_dev   Sascha Hauer
• barebox:ubi attach time   Barbier, Renaud
• barebox:ubi attach time   Sascha Hauer
• Enable Display/Splash on Phycore am335x with barebox 2020.01.0   Koelle, Holger
• Enable Display/Splash on Phycore am335x with barebox 2020.01.0   Sascha Hauer
• Enable Display/Splash on Phycore am335x with barebox 2020.01.0   Ahmad Fatoum
• Getting serial console output on new imx7d tqma7 board UART4   Lars Pedersen
• Getting serial console output on new imx7d tqma7 board UART4   Ahmad Fatoum
• Getting serial console output on new imx7d tqma7 board UART4   Sascha Hauer
• Getting serial console output on new imx7d tqma7 board UART4   Lars Pedersen
• Getting serial console output on new imx7d tqma7 board UART4   Lars Pedersen
• Getting serial console output on new imx7d tqma7 board UART4   Ahmad Fatoum
• Getting serial console output on new imx7d tqma7 board UART4   Lars Pedersen
• Getting serial console output on new imx7d tqma7 board UART4   Ahmad Fatoum
• Getting serial console output on new imx7d tqma7 board UART4   Lars Pedersen
• Getting serial console output on new imx7d tqma7 board UART4   Ahmad Fatoum
• Getting serial console output on new imx7d tqma7 board UART4   Lars Pedersen
• Getting serial console output on new imx7d tqma7 board UART4   Ahmad Fatoum
• Getting serial console output on new imx7d tqma7 board UART4   Lars Pedersen
• Getting serial console output on new imx7d tqma7 board UART4   Sascha Hauer
• NULL pointer deref crash on barebox 2020.08.0   Giorgio Dal Molin
• NULL pointer deref crash on barebox 2020.08.0   Ahmad Fatoum
• NULL pointer deref crash on barebox 2020.08.0   Giorgio Dal Molin
• NULL pointer deref crash on barebox 2020.08.0   Ahmad Fatoum
• NULL pointer deref crash on barebox 2020.08.0   Giorgio Dal Molin
• NULL pointer deref crash on barebox 2020.08.0   Sascha Hauer
• NULL pointer deref crash on barebox 2020.08.0   Giorgio Dal Molin
• NULL pointer deref crash on barebox 2020.08.0   Giorgio Dal Molin
• NULL pointer deref crash on barebox 2020.08.0   Sascha Hauer
• Some USB memory sticks not (fully) recognized   Christian Eggers
• Some USB memory sticks not (fully) recognized   Christian Eggers
• Some USB memory sticks not (fully) recognized   Sascha Hauer
• Some USB memory sticks not (fully) recognized   Christian Eggers
• Some USB memory sticks not (fully) recognized   Sascha Hauer
• v2020.08.0   Sascha Hauer
• v2020.08.1   Sascha Hauer

Last message date: Mon Aug 31 08:20:21 EDT 2020
Archived on: Mon Aug 31 09:24:52 EDT 2020

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...