[PATCH v2 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK

[Sascha Hauer]

On Tue, Aug 11, 2020 at 11:43:27AM +0200, Lucas Stach wrote:
> Without this select the necessary DDR PHY firmware files will be missing
> when only building for the i.MX8MM-EVK board.
> 
> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> ---
>  arch/arm/mach-imx/Kconfig | 1 +
>  1 file changed, 1 insertion(+)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 7e4265900479..007845c6d13d 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -525,6 +525,7 @@ config MACH_NXP_IMX6ULL_EVK
>  config MACH_NXP_IMX8MM_EVK
>  	bool "NXP i.MX8MM EVK Board"
>  	select ARCH_IMX8MM
> +	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
>  	select FIRMWARE_IMX8MM_ATF
>  	select ARM_SMCCC
>  	select MCI_IMX_ESDHC_PBL
> -- 
> 2.20.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |