ath10k-firmware: QCA9980 hw2.0: add ASRock G10 specific BDFs

[Kalle Valo]

Christian Lamparter <chunkeey at gmail.com> writes:

> this is a set of board.bin files for the ASRock G10,
> which I wish to be added to the ath10k-firmware repository.
>
> As per the current "Submitting board files" guidelines [1]:
>
> * description for what hardware this is:
>   - it is a IPQ8064 based board with
>     - one QCA9980 radio is used as 2.4 GHz radio
>     - one QCA9980 radio is used as 5 GHz radio
>
> * origin of the board file (did you create it yourself or where you downloaded
>   all files were extracted from official vendor firmware which was on the device.
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>   - qca9980 hw2.0
>     + bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10
>     + bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10
> * md5sum of each new board file to add
>
> ae069744baeebfd6861e8080a92439ca  bus=pci,bmi-chip-id=1,bmi-board-id=1,variant=ASRock-G10 
> 9e196846841a186e61ea208cc873384c  bus=pci,bmi-chip-id=1,bmi-board-id=2,variant=ASRock-G10

There is no QCA9880 directory in ath10k-firmware, do you mean this
should be added to QCA988X/hw2.0/board-2.bin?

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches