ath10k-firmware: QCA9888 hw2.0: Add Plasma Cloud PA2200 specific BDFs

[Kalle Valo]

Sven Eckelmann <sven at narfation.org> writes:

> The support for this device is currently prepared for OpenWrt. This AP requires 
> three special BDFs to get the Wi-Fi PHYs working (correctly).
>
> Now to the questions from the wiki page [1]:
>
> * description for what hardware this is:
>
>   - it is a IPQ4019 based board
>   - one QCA40xx radio is used as 2.4GHz radio
>   - one QCA9888 radio is used as 5GHz radio (channel 36-64)
>   - one QCA40xx radio is used as 5GHz radio (channel 100-165)
>
> * origin of the board file (did you create it yourself or where you
>   downloaded)
>
>   - was provided by vendor in patch send to me for the OpenWrt support
>     (Sun, 27 Jan 2019 22:23:37 +0800)
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
>
>   - BoardNames[0]: 'bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200'
>     BoardLength[0]: 12064
>     BoardCRC32[0]: b5855151
>     BoardMD5[0]: 271e88642c141a58e115819de756994d
>
> * attach the actual board file (board.bin)
>
>   - The name of the files are equal to the id string in the board-2.bin
>     (minus the ".bin")

Thanks, added to QCA9888/hw2.0/board-2.bin:

New:
bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200

Changed:


Deleted:

1 board image(s) added, 0 changed, 0 deleted, 10 in total

https://github.com/kvalo/ath10k-firmware/commit/085c231d48a7247e531e757479f6746b60a97c86


-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches