February 2024 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Thu Feb 1 02:30:20 PST 2024
Ending: Thu Feb 29 08:02:17 PST 2024
Messages: 164

• [PATCH 0/4] Add relocatable address support for jump and payload firmware   Inochi Amaoto
• [PATCH 0/4] Add relocatable address support for jump and payload firmware   Anup Patel
• [PATCH 0/5] starfive reboot cleanup & fix   Minda Chen
• [PATCH 1/1] lib: sbi_hsm: Restor hart state to stop when fails to start   Joshua Yeong
• [PATCH 1/1] lib: sbi_hsm: Restor hart state to stop when fails to start   Xiang W
• [PATCH 1/1] lib: sbi_hsm: Restor hart state to stop when fails to start   Joshua Yeong
• [PATCH 1/1] lib: sbi_hsm: Restor hart state to stop when fails to start   Xiang W
• [PATCH 1/1] lib: sbi_hsm: Restor hart state to stop when fails to start   Anup Patel
• [PATCH 1/2] check for --exclude-libs   Anup Patel
• [PATCH 1/4] docs: Add documentation about tests and SBIUnit   Ivan Orlov
• [PATCH 1/4] docs: Add documentation about tests and SBIUnit   Andrew Jones
• [PATCH 1/4] docs: Add documentation about tests and SBIUnit   Ivan Orlov
• [PATCH 1/4] docs: Add documentation about tests and SBIUnit   Andrew Jones
• [PATCH 1/4] docs: Add documentation about tests and SBIUnit   Ivan Orlov
• [PATCH 1/4] docs: Add documentation about tests and SBIUnit   Andrew Jones
• [PATCH 1/4] docs: Add documentation about tests and SBIUnit   Ivan Orlov
• [PATCH 1/4] firmware: Add relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR   Inochi Amaoto
• [PATCH 1/4] firmware: Add relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR   Anup Patel
• [PATCH 1/4] firmware: Add relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR   Inochi Amaoto
• [PATCH 1/4] firmware: Add relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR   Anup Patel
• [PATCH 1/4] firmware: Add relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR   Inochi Amaoto
• [PATCH 2/2] firmware: always create dynsym section   Anup Patel
• [PATCH 2/4] firmware: Add relocatable FW_PAYLOAD_FDT_ADDR   Inochi Amaoto
• [PATCH 2/4] firmware: Add relocatable FW_PAYLOAD_FDT_ADDR   Anup Patel
• [PATCH 2/4] firmware: Add relocatable FW_PAYLOAD_FDT_ADDR   Inochi Amaoto
• [PATCH 2/4] lib: Add SBIUnit testing macros and functions   Ivan Orlov
• [PATCH 2/4] lib: Add SBIUnit testing macros and functions   Andrew Jones
• [PATCH 2/4] lib: Add SBIUnit testing macros and functions   Ivan Orlov
• [PATCH 2/4] lib: Add SBIUnit testing macros and functions   Andrew Jones
• [PATCH 2/4] lib: Add SBIUnit testing macros and functions   Ivan Orlov
• [PATCH 3/4] lib: tests: Add a test for sbi_bitmap   Ivan Orlov
• [PATCH 3/4] lib: tests: Add a test for sbi_bitmap   Andrew Jones
• [PATCH 3/4] platform: Apply relocatable address   Inochi Amaoto
• [PATCH 3/4] platform: Apply relocatable address   Anup Patel
• [PATCH 3/4] platform: Apply relocatable address   Inochi Amaoto
• [PATCH 4/4] doc/firmware: add new configuration options for jump and payload firmware   Inochi Amaoto
• [PATCH 4/4] lib: tests: Add sbi_console test   Ivan Orlov
• [PATCH 4/4] lib: tests: Add sbi_console test   Andrew Jones
• [PATCH 4/4] lib: tests: Add sbi_console test   Ivan Orlov
• [PATCH 4/4] lib: tests: Add sbi_console test   Andrew Jones
• [PATCH 4/4] lib: tests: Add sbi_console test   Ivan Orlov
• [PATCH] fw_base.S: Fix comment errors   Anup Patel
• [PATCH] lib: sbi: Add sparse hartid support for mtimer/ipi   yang.zhang
• [PATCH] lib: sbi: Add sparse hartid support for mtimer/ipi   yang.zhang
• [PATCH] lib: sbi: Add sparse hartid support for mtimer/ipi   Anup Patel
• [PATCH] lib: sbi: Add sparse hartid support for mtimer/ipi   yang.zhang
• [PATCH] lib: sbi: Use mask to check the free bit during trigger allocation   Anup Patel
• [PATCH] lib: sbi_domain: Fix PMP condition for addresses   cmax at mailbox.org
• [PATCH] lib: sbi_domain: Fix PMP condition for addresses   Xiang W
• [PATCH] lib: sbi_misaligned_ldst: Add handling of C.LHU/C.LH and C.SH   Nylon Chen
• [PATCH] lib: sbi_pmu: Before using we should ensure PMU init done   Anup Patel
• [PATCH] lib: sbi_pmu: Before using we should ensure PMU init done   yang.zhang
• [PATCH] Makefile: Remove unused code and data   Anup Patel
• [PATCH] platform: andes: Drop andes_pmu_setup()   Yu Chien Peter Lin
• [PATCH v1 0/1] Add Indirect CSR and Counter delegation ISA extension support   Atish Patra
• [PATCH v1 1/1] lib: sbi: Add support for smcsrind and smcdeleg   Atish Patra
• [PATCH v2 0/3] Allow platform to handle load/store faults   Bo Gan
• [PATCH v2 0/4] Add relocatable address support for jump and payload firmware   Inochi Amaoto
• [PATCH v2 0/5] SBIUnit: cover OpenSBI with tests   Ivan Orlov
• [PATCH v2 1/3] lib: sbi: rename sbi_misaligned_ldst.c to sbi_trap_ldst.c   Bo Gan
• [PATCH v2 1/3] lib: sbi: rename sbi_misaligned_ldst.c to sbi_trap_ldst.c   Anup Patel
• [PATCH v2 1/4] firmware: Add relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR   Inochi Amaoto
• [PATCH v2 1/4] firmware: Add relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR   Anup Patel
• [PATCH v2 1/5] docs: Add documentation about tests and SBIUnit   Ivan Orlov
• [PATCH v2 1/5] docs: Add documentation about tests and SBIUnit   Andrew Jones
• [PATCH v2 1/5] docs: Add documentation about tests and SBIUnit   Ivan Orlov
• [PATCH v2 2/3] include: sbi: rename sbi_misaligned_ldst.h to sbi_trap_ldst.h   Bo Gan
• [PATCH v2 2/3] include: sbi: rename sbi_misaligned_ldst.h to sbi_trap_ldst.h   Anup Patel
• [PATCH v2 2/4] firmware: Add relocatable FW_PAYLOAD_FDT_ADDR   Inochi Amaoto
• [PATCH v2 2/4] firmware: Add relocatable FW_PAYLOAD_FDT_ADDR   Anup Patel
• [PATCH v2 2/5] lib: Add SBIUnit testing macros and functions   Ivan Orlov
• [PATCH v2 2/5] lib: Add SBIUnit testing macros and functions   Andrew Jones
• [PATCH v2 2/5] lib: Add SBIUnit testing macros and functions   Ivan Orlov
• [PATCH v2 2/5] lib: Add SBIUnit testing macros and functions   Andrew Jones
• [PATCH v2 2/5] lib: Add SBIUnit testing macros and functions   Ivan Orlov
• [PATCH v2 2/5] lib: Add SBIUnit testing macros and functions   Andrew Jones
• [PATCH v2 2/5] lib: Add SBIUnit testing macros and functions   Ivan Orlov
• [PATCH v2 3/3] lib: sbi: Allow platform to fixup load/store faults   Bo Gan
• [PATCH v2 3/3] lib: sbi: Allow platform to fixup load/store faults   Anup Patel
• [PATCH v2 3/4] platform: Apply relocatable address   Inochi Amaoto
• [PATCH v2 3/4] platform: Apply relocatable address   Anup Patel
• [PATCH v2 3/5] Makefile: clean '.c' files generated by carray   Ivan Orlov
• [PATCH v2 3/5] Makefile: clean '.c' files generated by carray   Andrew Jones
• [PATCH v2 3/5] Makefile: clean '.c' files generated by carray   Ivan Orlov
• [PATCH v2 3/5] Makefile: clean '.c' files generated by carray   Andrew Jones
• [PATCH v2 3/5] Makefile: clean '.c' files generated by carray   Ivan Orlov
• [PATCH v2 4/4] doc/firmware: add new configuration options for jump and payload firmware   Inochi Amaoto
• [PATCH v2 4/4] doc/firmware: add new configuration options for jump and payload firmware   Anup Patel
• [PATCH v2 4/5] lib: tests: Add a test for sbi_bitmap   Ivan Orlov
• [PATCH v2 4/5] lib: tests: Add a test for sbi_bitmap   Andrew Jones
• [PATCH v2 5/5] lib: tests: Add sbi_console test   Ivan Orlov
• [PATCH v2 5/5] lib: tests: Add sbi_console test   Xiang W
• [PATCH v2 5/5] lib: tests: Add sbi_console test   Ivan Orlov
• [PATCH v2 5/5] lib: tests: Add sbi_console test   Andrew Jones
• [PATCH v2] lib:platform: Add support for specify coldboot harts in DT for generic.   Anup Patel
• [PATCH V2] lib: sbi: Add sparse hartid support for mtimer and mswi   yang.zhang
• [PATCH V2] lib: sbi: Add sparse hartid support for mtimer and mswi   Anup Patel
• [PATCH V2] lib: sbi: Add sparse hartid support for mtimer and mswi   yang.zhang
• [PATCH V2] lib: sbi: Add sparse hartid support for mtimer and mswi   Anup Patel
• [PATCH V2] lib: sbi: Add sparse hartid support for mtimer and mswi   yang.zhang
• [PATCH v2] lib: sbi_domain: Fix PMP condition for addresses   cmax at mailbox.org
• [PATCH v2] Makefile: don't pass -mstrict-align if not supported   Anup Patel
• [PATCH v3 0/7] Starfive reboot fix & cleanup   Nam Cao
• [PATCH v3 01/10] firmware: fw_base.S: Improve loading u32   Anup Patel
• [PATCH v3 02/10] firmware: fw_base.S: remove _runtime_offset   Anup Patel
• [PATCH v3 03/10] firmware: fw_base.S: Simplify address get in _relocate   Anup Patel
• [PATCH v3 05/10] firmware: fw_base.S: Move _link_start to .rodata section   Anup Patel
• [PATCH v3 06/10] firmware: fw_base: Simplified setup trap handler   Anup Patel
• [PATCH v3 07/10] firmware: fw_dynamic.S: Remove _bad_dynamic_info   Anup Patel
• [PATCH v3 08/10] firmware: fw_base.S: Remove _relocate_lottery   Anup Patel
• [PATCH v3 09/10] firmware: Use C if possible   Anup Patel
• [PATCH v3 1/4] lib:platform: Add support for specify coldboot harts in DT for generic.   Cheng Yang
• [PATCH v3 1/4] lib:platform: Add support for specify coldboot harts in DT for generic.   Anup Patel
• [PATCH v3 1/7] platform: starfive: correct system clock device tree node   Nam Cao
• [PATCH v3 2/4] docs: Add OpenSBI DT configuration guide.   Cheng Yang
• [PATCH v3 2/4] docs: Add OpenSBI DT configuration guide.   Anup Patel
• [PATCH v3 2/7] platform: starfive: get I2C offset address from clocks property   Nam Cao
• [PATCH v3 2/7] platform: starfive: get I2C offset address from clocks property   Minda Chen
• [PATCH v3 3/4] platform: generic: Parse system suspend test from config node.   Cheng Yang
• [PATCH v3 3/4] platform: generic: Parse system suspend test from config node.   Anup Patel
• [PATCH v3 3/7] platform: starfive: remove redundant compatibility check in pmic_ops   Nam Cao
• [PATCH v3 4/4] docs: move documentation of system suspend test.   Cheng Yang
• [PATCH v3 4/4] docs: move documentation of system suspend test.   Anup Patel
• [PATCH v3 4/7] platform: starfive: rename "stf,axp15060-regulator" -> "x-powers,axp15060"   Nam Cao
• [PATCH v3 4/7] platform: starfive: rename "stf,axp15060-regulator" -> "x-powers,axp15060"   Minda Chen
• [PATCH v3 4/7] platform: starfive: rename "stf,axp15060-regulator" -> "x-powers,axp15060"   Nam Cao
• [PATCH v3 5/7] platform: starfive: drop "compatible" from struct pmic   Nam Cao
• [PATCH v3 6/7] platform: starfive: return error if needed devices are not present   Nam Cao
• [PATCH v3 7/7] platform: starfive: call starfive_jh7110_inst_init() in pm_reset_init()   Nam Cao
• [PATCH v3 7/7] platform: starfive: call starfive_jh7110_inst_init() in pm_reset_init()   Minda Chen
• [PATCH v3 7/7] platform: starfive: call starfive_jh7110_inst_init() in pm_reset_init()   Nam Cao
• [PATCH v3] lib: sbi: Add initial domain context management support   Anup Patel
• [PATCH v4 0/7] starfive reboot cleanup & fix   Nam Cao
• [PATCH v4 0/8] Improvements to fw_base.S   Xiang W
• [PATCH v4 1/7] platform: starfive: correct system clock device tree node   Nam Cao
• [PATCH v4 1/7] platform: starfive: correct system clock device tree node   Minda Chen
• [PATCH v4 1/8] firmware: remove copy-base relocation   Xiang W
• [PATCH v4 2/7] platform: starfive: get I2C offset address from clocks property   Nam Cao
• [PATCH v4 2/8] firmware: fw_base.S: Simplify address get   Xiang W
• [PATCH v4 3/7] platform: starfive: remove redundant compatibility check in pmic_ops   Nam Cao
• [PATCH v4 3/8] firmware: fw_base: Simplified setup trap handler   Xiang W
• [PATCH v4 4/7] platform: starfive: rename "stf,axp15060-regulator" -> "x-powers,axp15060"   Nam Cao
• [PATCH v4 4/7] platform: starfive: rename "stf,axp15060-regulator" -> "x-powers,axp15060"   Minda Chen
• [PATCH v4 4/8] firmware: fw_dynamic.S: Remove _bad_dynamic_info   Xiang W
• [PATCH v4 5/7] platform: starfive: drop "compatible" from struct pmic   Nam Cao
• [PATCH v4 5/8] firmware: fw_base.S: Remove _relocate_lottery   Xiang W
• [PATCH v4 6/7] platform: starfive: return error if needed devices are not present   Nam Cao
• [PATCH v4 6/8] firmware: fw_base.S: fix _reset_regs   Xiang W
• [PATCH v4 7/7] platform: starfive: call starfive_jh7110_inst_init() in pm_reset_init()   Nam Cao
• [PATCH v4 7/7] platform: starfive: call starfive_jh7110_inst_init() in pm_reset_init()   Minda Chen
• [PATCH v4 7/8] firmware: Improve fw_boot_hart   Xiang W
• [PATCH v4 8/8] firmware: Use C if possible   Xiang W
• [PATCH v5 0/6] starfive reboot cleanup & fix   Nam Cao
• [PATCH v5 0/6] starfive reboot cleanup & fix   Anup Patel
• [PATCH v5 1/6] platform: starfive: correct system clock device tree node   Nam Cao
• [PATCH v5 2/6] platform: starfive: get I2C offset address from clocks property   Nam Cao
• [PATCH v5 3/6] platform: starfive: remove redundant compatibility check in pmic_ops   Nam Cao
• [PATCH v5 4/6] platform: starfive: rename "stf,axp15060-regulator" -> "x-powers,axp15060"   Nam Cao
• [PATCH v5 5/6] platform: starfive: return error if needed devices are not present   Nam Cao
• [PATCH v5 6/6] platform: starfive: call starfive_jh7110_inst_init() in pm_reset_init()   Nam Cao
• 回复: [PATCH v3 2/7] platform: starfive: get I2C offset address from clocks property   Minda Chen
• 回复: [PATCH v3 2/7] platform: starfive: get I2C offset address from clocks property   Nam Cao
• 回复: [PATCH v3 5/7] platform: starfive: drop "compatible" from struct pmic   Minda Chen
• 回复: [PATCH v3 5/7] platform: starfive: drop "compatible" from struct pmic   Nam Cao

Last message date: Thu Feb 29 08:02:17 PST 2024
Archived on: Thu Feb 29 08:05:04 PST 2024

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...