[PATCH v2 3/4] platform: Apply relocatable address

[Inochi Amaoto]

Since jump and payload firmware support relocatable address, make
general platform use runtime relocatable address.

Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
---
 platform/generic/objects.mk  |  8 ++++----
 platform/template/objects.mk | 17 +++++++++++++++++
 2 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/platform/generic/objects.mk b/platform/generic/objects.mk
index 136853e..85aa723 100644
--- a/platform/generic/objects.mk
+++ b/platform/generic/objects.mk
@@ -27,12 +27,12 @@ FW_DYNAMIC=y
 FW_JUMP=y
 ifeq ($(PLATFORM_RISCV_XLEN), 32)
   # This needs to be 4MB aligned for 32-bit system
-  FW_JUMP_ADDR=$(shell printf "0x%X" $$(($(FW_TEXT_START) + 0x400000)))
+  FW_JUMP_OFFSET=0x400000
 else
   # This needs to be 2MB aligned for 64-bit system
-  FW_JUMP_ADDR=$(shell printf "0x%X" $$(($(FW_TEXT_START) + 0x200000)))
+  FW_JUMP_OFFSET=0x200000
 endif
-FW_JUMP_FDT_ADDR=$(shell printf "0x%X" $$(($(FW_TEXT_START) + 0x2200000)))
+FW_JUMP_FDT_OFFSET=0x2200000
 FW_PAYLOAD=y
 ifeq ($(PLATFORM_RISCV_XLEN), 32)
   # This needs to be 4MB aligned for 32-bit system
@@ -41,4 +41,4 @@ else
   # This needs to be 2MB aligned for 64-bit system
   FW_PAYLOAD_OFFSET=0x200000
 endif
-FW_PAYLOAD_FDT_ADDR=$(FW_JUMP_FDT_ADDR)
+FW_PAYLOAD_FDT_OFFSET=$(FW_JUMP_FDT_OFFSET)
diff --git a/platform/template/objects.mk b/platform/template/objects.mk
index 0025928..b143cbc 100644
--- a/platform/template/objects.mk
+++ b/platform/template/objects.mk
@@ -63,6 +63,17 @@ FW_JUMP=<y|n>
 # This needs to be 4MB aligned for 32-bit support
 # This needs to be 2MB aligned for 64-bit support
 # ifeq ($(PLATFORM_RISCV_XLEN), 32)
+# FW_JUMP_OFFSET=0x400000
+# else
+# FW_JUMP_OFFSET=0x200000
+# endif
+# FW_JUMP_FDT_OFFSET=0x2200000
+#
+# You can use fixed address for jump firmware as an alternative option,
+# but this may fail when setting wrong FW_TEXT_START. Use with caution.
+# SBI will prefer "<X>_ADDR" if both "<X>_ADDR" and "<X>_OFFSET" are
+# defined
+# ifeq ($(PLATFORM_RISCV_XLEN), 32)
 # FW_JUMP_ADDR=0x80400000
 # else
 # FW_JUMP_ADDR=0x80200000
@@ -84,4 +95,10 @@ FW_PAYLOAD_OFFSET=0x200000
 endif
 # FW_PAYLOAD_ALIGN=0x1000
 # FW_PAYLOAD_PATH="path to next boot stage binary image file"
+# FW_PAYLOAD_FDT_OFFSET=0x2200000
+#
+# You can use fixed address for payload firmware as an alternative option,
+# but this may fail when setting wrong FW_TEXT_START. Use with caution.
+# SBI will prefer "FW_PAYLOAD_FDT_ADDR" if both "FW_PAYLOAD_FDT_OFFSET"
+# and "FW_PAYLOAD_FDT_ADDR" are defined.
 # FW_PAYLOAD_FDT_ADDR=0x82200000
-- 
2.43.2