June 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Jun 1 07:47:03 PDT 2016
Ending: Thu Jun 30 20:10:31 PDT 2016
Messages: 202

• [PATCH v2 1/4] dt-bindings: rng: Northstar Plus SoC rng bindings   Rob Herring
  • [PATCH v2 1/4] dt-bindings: rng: Northstar Plus SoC rng bindings   Yendapally Reddy Dhananjaya Reddy
    • [PATCH v2 1/4] dt-bindings: rng: Northstar Plus SoC rng bindings   Herbert Xu
• [PATCH v3 0/4] clk: bcm2835: critical clocks and parent selection   Eric Anholt
  • [PATCH v3 1/4] clk: bcm2835: Mark the VPU clock as critical   Eric Anholt
  • [PATCH v3 2/4] clk: bcm2835: Mark GPIO clocks enabled at boot as critical   Eric Anholt
  • [PATCH v3 3/4] clk: bcm2835: Mark the CM SDRAM clock's parent as critical   Eric Anholt
  • [PATCH v3 4/4] clk: bcm2835: Skip PLLC clocks when deciding on a new clock parent   Eric Anholt
• [PATCH 00/32] raspberry pi 3 patch series   Gerd Hoffmann
  • [PATCH 01/32] arm64: Add platform selection for BCM2835.   Gerd Hoffmann
    • [PATCH 01/32] arm64: Add platform selection for BCM2835.   Florian Fainelli
    • [PATCH 01/32] arm64: Add platform selection for BCM2835.   Gerd Hoffmann
      • [PATCH 01/32] arm64: Add platform selection for BCM2835.   Ray Jui
      • [PATCH 01/32] arm64: Add platform selection for BCM2835.   Scott Branden
      • [PATCH 01/32] arm64: Add platform selection for BCM2835.   Gerd Hoffmann
      • [PATCH 01/32] arm64: Add platform selection for BCM2835.   Scott Branden
      • [PATCH 01/32] arm64: Add platform selection for BCM2835.   Florian Fainelli
      • [PATCH 01/32] arm64: Add platform selection for BCM2835.   Catalin Marinas
  • [PATCH 04/32] dt-bindings: Add root properties for Raspberry Pi 3   Gerd Hoffmann
  • [PATCH 05/32] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Gerd Hoffmann
  • [PATCH 06/32] arm64: Fix physical to DMA mappings.   Gerd Hoffmann
    • [PATCH 06/32] arm64: Fix physical to DMA mappings.   Catalin Marinas
  • [PATCH 07/32] ARM: bcm2835: dt: Add the ethernet to the device trees   Gerd Hoffmann
  • [PATCH 08/32] ARM: bcm2837: dt: Add the ethernet to the device trees   Gerd Hoffmann
  • [PATCH 09/32] bcm2837-rpi-3-b.dts for 32bit arm   Gerd Hoffmann
  • [PATCH 10/32] don't force serial pins to uart0   Gerd Hoffmann
  • [PATCH 11/32] ARM: bcm2835: Define standard pinctrl groups in the gpio node.   Gerd Hoffmann
  • [PATCH 12/32] ARM: bcm2835: Replace alt0/i2s_alt[02] with standard groups.   Gerd Hoffmann
  • [PATCH 13/32] bcm2837-rpi-3-b.dts: add gpio   Gerd Hoffmann
  • [PATCH 14/32] bcm2837-rpi-3-b.dts: vc4 hdmi fixup   Gerd Hoffmann
  • [PATCH 15/32] ARM: bcm2835: Move the emmc pin group to bcm283x.dtsi.   Gerd Hoffmann
  • [PATCH 16/32] bcm2837-rpi-3-b.dts: move the emmc pin group   Gerd Hoffmann
  • [PATCH 17/32] ARM: bcm2835: Add a group for mapping pins 48-53 to sdhost.   Gerd Hoffmann
  • [PATCH 18/32] ARM: bcm2835: Move most RPi default pin groups to their devices.   Gerd Hoffmann
  • [PATCH 19/32] bcm2837-rpi-3-b.dts: move most RPi default pin groups to their devices   Gerd Hoffmann
  • [PATCH 20/32] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Gerd Hoffmann
    • [PATCH 20/32] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Rob Herring
  • [PATCH 21/32] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Gerd Hoffmann
    • [PATCH 21/32] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Arnd Bergmann
      • [PATCH 21/32] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Eric Anholt
      • [PATCH 21/32] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Arnd Bergmann
  • [PATCH 22/32] ARM: bcm2835: Include SDHOST in the device tree.   Gerd Hoffmann
  • [PATCH 23/32] ARM: bcm2835: Enable SDHOST by default.   Gerd Hoffmann
  • [PATCH 24/32] i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock   Gerd Hoffmann
  • [PATCH 25/32] dt-gpio-fix   Gerd Hoffmann
  • [PATCH 26/32] enable uart1 on the BT pins   Gerd Hoffmann
  • [PATCH 27/32] gpio: Add support for the FXL6408 GPIO expander.   Gerd Hoffmann
    • [PATCH 27/32] gpio: Add support for the FXL6408 GPIO expander.   Eric Anholt
    • [PATCH 27/32] gpio: Add support for the FXL6408 GPIO expander.   Florian Fainelli
    • [PATCH 27/32] gpio: Add support for the FXL6408 GPIO expander.   Linus Walleij
      • [PATCH 27/32] gpio: Add support for the FXL6408 GPIO expander.   Eric Anholt
  • [PATCH 28/32] i2c: bcm2835: Set up the rising/falling edge delays.   Gerd Hoffmann
  • [PATCH 29/32] ARM: bcm2835: Use i2c-gpio for the expander, instead.   Gerd Hoffmann
  • [PATCH 30/32] ARM: bcm2835: Add a new EMMC pin group from the downstream tree.   Gerd Hoffmann
  • [PATCH 31/32] enable wireless   Gerd Hoffmann
  • [PATCH 32/32] mmc: bcm2835: Import bcm2835-mmc and switch to it   Gerd Hoffmann
    • [PATCH 32/32] mmc: bcm2835: Import bcm2835-mmc and switch to it   Stefan Wahren
      • [PATCH 32/32] mmc: bcm2835: Import bcm2835-mmc and switch to it   Eric Anholt
      • [PATCH 32/32] mmc: bcm2835: Import bcm2835-mmc and switch to it   Stefan Wahren
      • [PATCH 32/32] mmc: bcm2835: Import bcm2835-mmc and switch to it   Gerd Hoffmann
      • [PATCH 32/32] mmc: bcm2835: Import bcm2835-mmc and switch to it   Eric Anholt
  • [PATCH 09/32] bcm2837-rpi-3-b.dts for 32bit arm   Arnd Bergmann
    • [PATCH 09/32] bcm2837-rpi-3-b.dts for 32bit arm   Eric Anholt
      • [PATCH 09/32] bcm2837-rpi-3-b.dts for 32bit arm   Arnd Bergmann
      • [PATCH 09/32] bcm2837-rpi-3-b.dts for 32bit arm   Gerd Hoffmann
      • [PATCH 09/32] bcm2837-rpi-3-b.dts for 32bit arm   Arnd Bergmann
      • [PATCH 09/32] bcm2837-rpi-3-b.dts for 32bit arm   Gerd Hoffmann
      • [PATCH 09/32] bcm2837-rpi-3-b.dts for 32bit arm   Arnd Bergmann
      • [PATCH 09/32] bcm2837-rpi-3-b.dts for 32bit arm   Gerd Hoffmann
      • [PATCH 09/32] bcm2837-rpi-3-b.dts for 32bit arm   Arnd Bergmann
  • [PATCH 00/32] raspberry pi 3 patch series   Eric Anholt
    • [PATCH 00/32] raspberry pi 3 patch series   Gerd Hoffmann
      • [PATCH 00/32] raspberry pi 3 patch series   Gerd Hoffmann
  • [PATCH 10/32] don't force serial pins to uart0   Arnd Bergmann
    • [PATCH 10/32] don't force serial pins to uart0   Eric Anholt
  • [PATCH 00/32] raspberry pi 3 patch series   Stefan Wahren
    • [PATCH 00/32] raspberry pi 3 patch series   Gerd Hoffmann
• [PATCH 02/32] arm64: Add BCM2835 support to the defconfig.   Gerd Hoffmann
• [PATCH 03/32] irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ.   Gerd Hoffmann
  • [PATCH 03/32] irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ.   Jason Cooper
    • [PATCH 03/32] irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ.   Eric Anholt
• [PATCH] i2c: bcm2835: Set up the clock stretching timeout at boot.   Eric Anholt
  • [PATCH] i2c: bcm2835: Set up the clock stretching timeout at boot.   Stefan Wahren
  • [PATCH] i2c: bcm2835: Set up the clock stretching timeout at boot.   Eric Anholt
• [PATCH v2 0/9] raspberry pi 3 patch series, part 1: essentials   Gerd Hoffmann
  • [PATCH v2 2/9] irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ.   Gerd Hoffmann
  • [PATCH v2 3/9] arm64: Allow for different DMA and CPU bus offsets   Gerd Hoffmann
  • [PATCH v2 4/9] arm64: Add platform selection for BCM2835.   Gerd Hoffmann
    • [PATCH v2 4/9] arm64: Add platform selection for BCM2835.   Catalin Marinas
      • [PATCH v2 4/9] arm64: Add platform selection for BCM2835.   Eric Anholt
      • [PATCH v2 4/9] arm64: Add platform selection for BCM2835.   Catalin Marinas
      • [PATCH v2 4/9] arm64: Add platform selection for BCM2835.   Eric Anholt
      • [PATCH v2 4/9] arm64: Add platform selection for BCM2835.   Catalin Marinas
      • [PATCH v2 4/9] arm64: Add platform selection for BCM2835.   Eric Anholt
      • [PATCH v2 4/9] arm64: Add platform selection for BCM2835.   Catalin Marinas
      • [PATCH v2 4/9] arm64: Add platform selection for BCM2835.   Eric Anholt
  • [PATCH v2 5/9] arm64: Add BCM2835 support to the defconfig.   Gerd Hoffmann
    • [PATCH v2 5/9] arm64: Add BCM2835 support to the defconfig.   Arnd Bergmann
      • [PATCH v2 5/9] arm64: Add BCM2835 support to the defconfig.   Gerd Hoffmann
      • [PATCH v2 5/9] arm64: Add BCM2835 support to the defconfig.   Arnd Bergmann
      • [PATCH v2 5/9] arm64: Add BCM2835 support to the defconfig.   Gerd Hoffmann
      • [PATCH v2 5/9] arm64: Add BCM2835 support to the defconfig.   Eric Anholt
  • [PATCH v2 6/9] dt-bindings: Add root properties for Raspberry Pi 3   Gerd Hoffmann
  • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Gerd Hoffmann
  • [PATCH v2 8/9] ARM: bcm2835: dt: Add the ethernet to the device trees   Gerd Hoffmann
  • [PATCH v2 9/9] ARM: bcm2837: dt: Add the ethernet to the device trees   Gerd Hoffmann
  • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Arnd Bergmann
    • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Gerd Hoffmann
    • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Arnd Bergmann
      • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Gerd Hoffmann
      • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Arnd Bergmann
      • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Rob Herring
      • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Arnd Bergmann
      • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Gerd Hoffmann
      • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Arnd Bergmann
      • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Gerd Hoffmann
  • [PATCH v2 0/9] raspberry pi 3 patch series, part 1: essentials   Arnd Bergmann
  • [PATCH v2 7/9] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Stefan Wahren
• [PATCH v2 1/9] pinctrl: walk into bcm subdir unconditionally   Gerd Hoffmann
  • [PATCH v2 1/9] pinctrl: walk into bcm subdir unconditionally   Linus Walleij
    • [PATCH v2 1/9] pinctrl: walk into bcm subdir unconditionally   Eric Anholt
  • [PATCH v2 1/9] pinctrl: walk into bcm subdir unconditionally   Linus Walleij
    • [PATCH v2 1/9] pinctrl: walk into bcm subdir unconditionally   Eric Anholt
• [PATCH 0/2] mmc: remove sdhci-bcm2835   Stefan Wahren
  • [PATCH 1/2] DT: bindings: remove bcm2835-sdhci   Stefan Wahren
    • [PATCH 1/2] DT: bindings: remove bcm2835-sdhci   Stephen Warren
      • [PATCH 1/2] DT: bindings: remove bcm2835-sdhci   Stefan Wahren
      • [PATCH 1/2] DT: bindings: remove bcm2835-sdhci   Stephen Warren
  • [PATCH 2/2] mmc: sdhci-bcm2835: remove driver   Stefan Wahren
    • [PATCH 2/2] mmc: sdhci-bcm2835: remove driver   Eric Anholt
  • [PATCH 0/2] mmc: remove sdhci-bcm2835   Ulf Hansson
• [PATCH] dma: bcm2835: Fix compiler warning on arm64.   Eric Anholt
  • [PATCH] dma: bcm2835: Fix compiler warning on arm64.   Vinod Koul
    • [PATCH] dma: bcm2835: Fix compiler warning on arm64.   Eric Anholt
• [PATCH] dmaengine: bcm2835: Fix polling for completion of DMA with interrupts masked.   Eric Anholt
  • [PATCH] dmaengine: bcm2835: Fix polling for completion of DMA with interrupts masked.   Vinod Koul
    • [PATCH] dmaengine: bcm2835: Fix polling for completion of DMA with interrupts masked.   Eric Anholt
      • [PATCH] dmaengine: bcm2835: Fix polling for completion of DMA with interrupts masked.   Vinod Koul
      • [PATCH] dmaengine: bcm2835: Fix polling for completion of DMA with interrupts masked.   Eric Anholt
      • [PATCH] dmaengine: bcm2835: Fix polling for completion of DMA with interrupts masked.   Vinod Koul
      • [PATCH] dmaengine: bcm2835: Fix polling for completion of DMA with interrupts masked.   Eric Anholt
• [PATCH v2 RESEND] irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ   Jason Cooper
• Updating Raspberry Pi trees pulled for -next   Eric Anholt
  • Updating Raspberry Pi trees pulled for -next   Stephen Rothwell
    • Updating Raspberry Pi trees pulled for -next   Eric Anholt
      • Updating Raspberry Pi trees pulled for -next   Stephen Rothwell
• [PATCH v3 00/10] raspberry pi 3 patch series, part 1: essentials   Gerd Hoffmann
  • [PATCH v3 02/10] irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ.   Gerd Hoffmann
    • [PATCH v3 02/10] irqchip: bcm2835: Avoid arch/arm-specific handle_IRQ.   Jason Cooper
  • [PATCH v3 03/10] arm64: Allow for different DMA and CPU bus offsets   Gerd Hoffmann
  • [PATCH v3 04/10] arm64: Add platform selection for BCM2835.   Gerd Hoffmann
  • [PATCH v3 06/10] dt-bindings: Add root properties for Raspberry Pi 3   Gerd Hoffmann
  • [PATCH v3 07/10] ARM: bcm2835: Add devicetree for the Raspberry Pi 3.   Gerd Hoffmann
  • [PATCH v3 08/10] ARM: bcm2835: Add devicetree for the Raspberry Pi 3, for arm (32)   Gerd Hoffmann
  • [PATCH v3 09/10] ARM: bcm2835: dt: Add the ethernet to the device trees   Gerd Hoffmann
  • [PATCH v3 10/10] ARM: bcm2837: dt: Add the ethernet to the device trees   Gerd Hoffmann
  • [PATCH v3 00/10] raspberry pi 3 patch series, part 1: essentials   Eric Anholt
• [PATCH v3 01/10] pinctrl: walk into bcm subdir unconditionally   Gerd Hoffmann
• [PATCH v3 05/10] arm64: Add BCM2835 support to the defconfig.   Gerd Hoffmann
• [PATCH] dmaengine: bcm2835: fix unexported function   Vinod Koul
  • [PATCH] dmaengine: bcm2835: fix unexported function   Ben Dooks
    • [PATCH] dmaengine: bcm2835: fix unexported function   Eric Anholt
• [PATCH 0/2] dmaengine: bcm2835: Cyclic DMA fixes   Matthias Reichl
  • [PATCH 1/2] dmaengine: bcm2835: Fix cyclic DMA period splitting   Matthias Reichl
    • [PATCH 1/2] dmaengine: bcm2835: Fix cyclic DMA period splitting   Eric Anholt
  • [PATCH 2/2] dmaengine: bcm2835: Avoid splitting periods into very small chunks   Matthias Reichl
    • [PATCH 2/2] dmaengine: bcm2835: Avoid splitting periods into very small chunks   Eric Anholt
      • [PATCH 2/2] dmaengine: bcm2835: Avoid splitting periods into very small chunks   Matthias Reichl
• Raspberry Pi 3 status update   Eric Anholt
  • Raspberry Pi 3 status update   Gerd Hoffmann
  • Raspberry Pi 3 status update   Florian Fainelli
  • Raspberry Pi 3 status update   Gerd Hoffmann
• [PATCH] arm64: Add BCM2835 support to the defconfig.   Gerd Hoffmann
• [PATCH V2 13/63] clocksource/drivers/bcm2835_timer: Convert init function to return error   Daniel Lezcano
  • [PATCH V2 13/63] clocksource/drivers/bcm2835_timer: Convert init function to return error   Eric Anholt
• [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Daniel Lezcano
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Krzysztof Kozlowski
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Santosh Shilimkar
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Matthias Brugger
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Heiko Stübner
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Patrice Chotard
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Liviu Dudau
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Neil Armstrong
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Sylvain Lemieux
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Ray Jui
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Noam Camus
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Chen-Yu Tsai
  • [PATCH V2 63/63] clocksources: Switch back to the clksrc table   Carlo Caione
• [PATCH 1/1] ASoC: bcm2835-i2s: Support 384k sample rate   Clive Messer
• [PATCH 0/5] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Gerd Hoffmann
  • [PATCH 1/5] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Gerd Hoffmann
    • [PATCH 1/5] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Rob Herring
  • [PATCH 2/5] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Gerd Hoffmann
  • [PATCH 5/5] mmc: bcm2835-sdhost: add to devicetree   Gerd Hoffmann
  • [PATCH 0/5] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Ulf Hansson
    • [PATCH 0/5] mmc: bcm2835-sdhost: Add new driver for the internal SD controller.   Gerd Hoffmann
• [PATCH 3/5] mmc: bcm2835-sdhost: zap mmiowb() [fixup]   Gerd Hoffmann
• [PATCH 4/5] mmc: bcm2835-sdhost: reset tweaks. [fixup]   Gerd Hoffmann
• [PATCH 23/92] clocksource/drivers/bcm2835_timer: Convert init function to return error   Daniel Lezcano
• [PATCH 72/92] clocksources: Switch back to the clksrc table   Daniel Lezcano
• [PATCH] dmaengine: bcm2835: fix 64-bit warning   Vinod Koul
  • [PATCH] dmaengine: bcm2835: fix 64-bit warning   Arnd Bergmann

Last message date: Thu Jun 30 20:10:31 PDT 2016
Archived on: Fri Jul 1 00:37:52 PDT 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...