[PATCH v3 05/10] arm64: Add BCM2835 support to the defconfig.
Gerd Hoffmann
kraxel at redhat.com
Tue Jun 7 04:05:43 PDT 2016
Signed-off-by: Gerd Hoffmann <kraxel at redhat.com>
---
arch/arm64/configs/defconfig | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index fd2d74d..50e5afc 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -31,6 +31,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_BCM2835=y
CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_EXYNOS=y
@@ -171,6 +172,7 @@ CONFIG_VIRTIO_CONSOLE=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_BCM2835=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_IMX=y
CONFIG_I2C_MV64XXX=y
@@ -179,6 +181,8 @@ CONFIG_I2C_TEGRA=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_RCAR=y
CONFIG_SPI=y
+CONFIG_SPI_BCM2835=y
+CONFIG_SPI_BCM2835AUX=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
CONFIG_SPI_QUP=y
@@ -202,6 +206,7 @@ CONFIG_THERMAL_EMULATION=y
CONFIG_EXYNOS_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_RENESAS_WDT=y
+CONFIG_BCM2835_WDT=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_HI655X_PMIC=y
@@ -220,6 +225,7 @@ CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
+CONFIG_SND_BCM2835_SOC_I2S=y
CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_AK4613=y
CONFIG_USB=y
@@ -248,12 +254,14 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_SDHCI_BCM2835=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_SPI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_K3=y
CONFIG_MMC_SUNXI=y
+CONFIG_MMC_BCM2835_SDHOST=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
@@ -269,6 +277,7 @@ CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_XGENE=y
CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2835=y
CONFIG_PL330_DMA=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_QCOM_BAM_DMA=y
@@ -288,8 +297,10 @@ CONFIG_MSM_GCC_8916=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_MAILBOX=y
CONFIG_ARM_MHU=y
+CONFIG_BCM2835_MBOX=y
CONFIG_HI6220_MBOX=y
CONFIG_ARM_SMMU=y
+CONFIG_RASPBERRYPI_POWER=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
@@ -301,6 +312,7 @@ CONFIG_PHY_RCAR_GEN3_USB2=y
CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_XGENE=y
CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_ACPI=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
--
1.8.3.1
More information about the linux-rpi-kernel
mailing list