July 2015 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Jul 1 12:39:31 PDT 2015
Ending: Fri Jul 31 19:55:59 PDT 2015
Messages: 135

• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Noralf Trønnes
• [PATCH V2] dt: brcm,bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux   Stefan Wahren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Noralf Trønnes
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• spi: bcm2835: driver for "auxiliar" spi1/spi2   Mark Brown
• [PATCH v3 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider   Eric Anholt
• Raspberry Pi 2 support, part 1: Interrupt controller   Eric Anholt
• [PATCH 1/4] irqchip: bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ.   Eric Anholt
• [PATCH 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.   Eric Anholt
• [PATCH 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Eric Anholt
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• [PATCH] mailbox: Drop owner assignment from platform_driver   Krzysztof Kozlowski
• [PATCH] irqchip: bcm2835: Add FIQ support   Stephen Warren
• [PATCH] pinctrl: bcm2835: Clear the event latch register when disabling interrupts   Stephen Warren
• [U-Boot] scripts: RPi 2: only 1 out of 4 CPUs brought up   Stephen Warren
• [PATCH V2] dt: brcm,bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux   Stephen Warren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stephen Warren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stephen Warren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stephen Warren
• [PATCH 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Stephen Warren
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Stephen Warren
• [PATCH 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Eric Anholt
• [U-Boot] scripts: RPi 2: only 1 out of 4 CPUs brought up   Eric Anholt
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Thomas Gleixner
• [PATCH] irqchip: bcm2835: Add FIQ support   Noralf Trønnes
• [PATCH v3 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   kernel at martin.sperl.org
• [PATCH v3 2/2] dt: brcm, bcm2835-aux-spi: add binding documentation for new spi-bcm2835aux   kernel at martin.sperl.org
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 10/13] pinctrl: kill off set_irq_flags usage   Rob Herring
• [PATCH v2 10/13] pinctrl: kill off set_irq_flags usage   Tomasz Figa
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Thomas Gleixner
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Rob Herring
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• Raspberry Pi 2 interrupt controller support (v2) Second round   Eric Anholt
• [PATCH v2 1/4] irqchip: bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ.   Eric Anholt
• [PATCH v2 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.   Eric Anholt
• [PATCH v2 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Eric Anholt
• [PATCH v2 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• [U-Boot] scripts: RPi 2: only 1 out of 4 CPUs brought up   Stephen Warren
• [PATCH] irqchip: bcm2835: Add FIQ support   Stephen Warren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stephen Warren
• [PATCH 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Stephen Warren
• [PATCH 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Stephen Warren
• [PATCH] irqchip: bcm2835: Add FIQ support   Noralf Trønnes
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Thomas Gleixner
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Russell King - ARM Linux
• [PATCH] pinctrl: bcm2835: Clear the event latch register when disabling interrupts   Linus Walleij
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Robert Jarzmik
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Russell King - ARM Linux
• Raspberry Pi Compute Module   Stefan Wahren
• [PATCH v7 1/3] dt/bindings: Add binding for the Raspberry Pi firmware driver   Eric Anholt
• [PATCH v7 2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver   Eric Anholt
• [PATCH v7 3/3] ARM: bcm2835: Add the firmware driver information to the RPi DT   Eric Anholt
• [PATCH v4 0/8] Raspberry Pi clock support   Eric Anholt
• [PATCH v4 1/8] clk: bcm2835: Add binding docs for the Raspberry Pi clock provider   Eric Anholt
• [PATCH v4 2/8] clk: Add a Raspberry Pi-specific clock driver.   Eric Anholt
• [PATCH v4 3/8] ARM: bcm2835: Add DT for the firmware clocks driver.   Eric Anholt
• [PATCH v4 4/8] ARM: bcm2835: Drop never-used clock-frequency property of uart0.   Eric Anholt
• [PATCH v4 5/8] clk: bcm2835: Drop the fixed sys_pclk.   Eric Anholt
• [PATCH v4 6/8] ARM: bcm2835: Use the RPi firmware clocks for uart.   Eric Anholt
• [PATCH v4 7/8] ARM: bcm2835: Tie SPI clock to the core clock rate.   Eric Anholt
• [PATCH v4 8/8] ARM: bcm2835: Use the firmware on rpi to get the EMMC clock.   Eric Anholt
• Raspberry Pi Compute Module   Eric Anholt
• Raspberry Pi Compute Module   Stefan Wahren
• [PATCH] irqchip: bcm2835: Add FIQ support   Stephen Warren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stephen Warren
• [PATCH v2 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.   Stephen Warren
• [PATCH v2 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Stephen Warren
• Raspberry Pi Compute Module   Stephen Warren
• [PATCH] irqchip: bcm2835: Add FIQ support   Noralf Trønnes
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• Raspberry Pi Compute Module   Stefan Wahren
• [PATCH v2 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• [PATCH v2 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.   Eric Anholt
• [PATCH 1/2] MAINTAINERS: Add myself as a bcm2835 co-maintainer.   Eric Anholt
• [PATCH 2/2] MAINTAINERS: Explicitly add linux-arm-kernel for bcm2835   Eric Anholt
• [PATCH 1/2] MAINTAINERS: Add myself as a bcm2835 co-maintainer.   Stephen Warren
• [PATCH] irqchip: bcm2835: Add FIQ support   Eric Anholt
• Raspberry Pi 2 interrupt controller support (v3)   Eric Anholt
• [PATCH v3 1/4] irqchip: bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ.   Eric Anholt
• [PATCH v3 2/4] irqchip: bcm2835: Add support for being used as a second level controller.   Eric Anholt
• [PATCH v3 3/4] irqchip: Add documentation for the bcm2836 interrupt controller.   Eric Anholt
• [PATCH v3 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Eric Anholt
• Raspberry Pi Compute Module   Stephen Warren
• [PATCH] irqchip: bcm2835: Add FIQ support   Stephen Warren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stephen Warren
• [PATCH v2 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.   Stephen Warren
• [U-Boot] [PATCH U-Boot] ARM: rpi_b: detect board revision   Stephen Warren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• Raspberry Pi2 performance   Alexander Stein
• [PATCH v4 6/8] ARM: bcm2835: Use the RPi firmware clocks for uart.   Lee Jones
• [PATCH v4 8/8] ARM: bcm2835: Use the firmware on rpi to get the EMMC clock.   Lee Jones
• [PATCH v4 4/8] ARM: bcm2835: Drop never-used clock-frequency property of uart0.   Lee Jones
• [PATCH v4 3/8] ARM: bcm2835: Add DT for the firmware clocks driver.   Lee Jones
• [PATCH v4 7/8] ARM: bcm2835: Tie SPI clock to the core clock rate.   Lee Jones
• [PATCH v7 1/3] dt/bindings: Add binding for the Raspberry Pi firmware driver   Lee Jones
• [PATCH v7 3/3] ARM: bcm2835: Add the firmware driver information to the RPi DT   Lee Jones
• [PATCH] mailbox: Drop owner assignment from platform_driver   Lee Jones
• [PATCH v3 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider   Lee Jones
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Gregory CLEMENT
• [PATCH v2 4/4] irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2.   Thomas Gleixner
• [PATCH] mailbox: Drop owner assignment from platform_driver   Eric Anholt
• [PATCH v2 06/13] irqchip: kill off set_irq_flags usage   Rob Herring
• [PATCH] irq-bcm2836: Move SMP boot to the irqchip code.   Eric Anholt
• [PATCH] irq-bcm2836: Move SMP boot to the irqchip code.   Florian Fainelli
• [PATCH] irqchip: bcm2836: Use a CPU notifier enable IPIs.   Eric Anholt
• [PATCH v3] irqchip: kill off set_irq_flags usage   Rob Herring
• [PATCH v3] pinctrl: kill off set_irq_flags usage   Rob Herring
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stephen Warren
• [PATCH v3 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider   Stephen Warren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH v3] irqchip: kill off set_irq_flags usage   Gregory CLEMENT
• [PATCH v3] pinctrl: kill off set_irq_flags usage   Linus Walleij
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH] spi: bcm2835: set up spi-mode before asserting cs-gpio   kernel at martin.sperl.org
• [PATCH] spi: bcm2835: fix overflow in calculation of transfer time   kernel at martin.sperl.org
• [PATCH] spi: bcm2835: fix overflow in calculation of transfer time   Mark Brown
• [PATCH] spi: bcm2835: fix overflow in calculation of transfer time   Martin Sperl
• [PATCH] spi: bcm2835: fix overflow in calculation of transfer time   Martin Sperl
• [PATCH] spi: bcm2835: fix overflow in calculation of transfer time   Mark Brown
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stefan Wahren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Noralf Trønnes
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stefan Wahren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Martin Sperl
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stefan Wahren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stephen Warren
• [PATCH 1/2] spi: bcm2835: add spi-bcm2835aux driver for the auxiliar spi1 and spi2   Stephen Warren

Last message date: Fri Jul 31 19:55:59 PDT 2015
Archived on: Fri Jul 31 19:56:23 PDT 2015

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...