[PATCH 2/2] riscv: dts: spacemit: Add MusePi Pro board device tree

[Troy Mitchell]

On Sun, Sep 28, 2025 at 04:00:03PM +0800, Yixun Lan wrote:
> Hi Troy,
> 
> On 12:16 Sun 28 Sep     , Troy Mitchell wrote:
> > From: Troy Mitchell <troy.mitchell at linux.spacemit.com>
> > 
> > Add initial device tree support for the MusePi Pro board [1].
> > The board is using the SpacemiT K1/M1 SoC.
> > 
> > The device tree is adapted from the SpacemiT vendor tree [2].
> > 
> > This minimal device tree enables booting into a serial console with UART
> > output and a blinking LED.
> > 
> > Link:
> > https://developer.spacemit.com/documentation?token=YJtdwnvvViPVcmkoPDpcvwfVnrh&type=pdf [1]
> > https://gitee.com/bianbu-linux/linux-6.6/blob/k1-bl-v2.2.y/arch/riscv/boot/dts/spacemit/k1-x_MUSE-Pi-Pro.dts [2]
> > 
> same as patch 1
> > Signed-off-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
> > ---
> >  arch/riscv/boot/dts/spacemit/Makefile          |  1 +
> >  arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts | 40 ++++++++++++++++++++++++++
> >  2 files changed, 41 insertions(+)
> > 
> > diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
> > index 152832644870624d8fd77684ef33addb42b0baf3..76b98096e2a46c3192651d6d66af7742f740c635 100644
> > --- a/arch/riscv/boot/dts/spacemit/Makefile
> > +++ b/arch/riscv/boot/dts/spacemit/Makefile
> > @@ -2,3 +2,4 @@
> >  dtb-$(CONFIG_ARCH_SPACEMIT) += k1-bananapi-f3.dtb
> >  dtb-$(CONFIG_ARCH_SPACEMIT) += k1-milkv-jupiter.dtb
> >  dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
> > +dtb-$(CONFIG_ARCH_SPACEMIT) += k1-musepi-pro.dtb
> please sort
Oh my gosh..
That's my mistake. I will fix it in the next version.

> 
> > diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
> > new file mode 100644
> > index 0000000000000000000000000000000000000000..3791186ce47b88887eab4321dcd7035668e7f02d
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
> > @@ -0,0 +1,40 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * Copyright (C) 2024 Yangyu Chen <cyy at cyyself.name>
> > + * Copyright (C) 2025 Troy Mitchell <troy.mitchell at linux.spacemit.com>
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "k1.dtsi"
> > +#include "k1-pinctrl.dtsi"
> > +
> > +/ {
> > +	model = "MusePi Pro";
> this is a little bit short, how about make it "SpacemiT MusePi Pro"?
Sounds good to me.

> 
> > +	compatible = "spacemit,musepi-pro", "spacemit,k1";
> > +
> > +	aliases {
> > +		serial0 = &uart0;
> > +	};
> > +
> > +	chosen {
> > +		stdout-path = "serial0";
> > +	};
> > +
> > +	leds {
> > +		compatible = "gpio-leds";
> > +
> > +		led1 {
> > +			label = "sys-led";
> > +			gpios = <&gpio K1_GPIO(96) GPIO_ACTIVE_HIGH>;
> > +			linux,default-trigger = "heartbeat";
> > +			default-state = "on";
> > +		};
> > +	};
> > +};
> > +
> > +&uart0 {
> ..
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&uart0_2_cfg>;
> swap these two lines, for similar reason, see my comment here
> https://lore.kernel.org/all/20250918133209-GYB1273705@gentoo.org/
Thanks for this link.
> 
> > +	status = "okay";
> > +};
> > 
> > -- 
> > 2.51.0
> > 
> 
> while you are here, I'd suggest to push as many features as possible
> instead of this minimal DT, which say - PMU, emmc, ethernet should be ready..
> (ethernet is in next, should show up at v6.18-rc1)
Good idea.
I think I should split these into multiple commits, right?
Like, PDMA and EMAC should definitely be two separate commits.

                                  - Troy
> 
> -- 
> Yixun Lan (dlan)
>