[PATCH 2/2] riscv: dts: spacemit: Add MusePi Pro board device tree

[Yixun Lan]

Hi Troy,

On 16:05 Sun 28 Sep     , Troy Mitchell wrote:
> On Sun, Sep 28, 2025 at 04:00:03PM +0800, Yixun Lan wrote:
> > Hi Troy,
> > 
> > On 12:16 Sun 28 Sep     , Troy Mitchell wrote:
> > > From: Troy Mitchell <troy.mitchell at linux.spacemit.com>
> > > 
> > > Add initial device tree support for the MusePi Pro board [1].
> > > The board is using the SpacemiT K1/M1 SoC.
> > > 
> > > The device tree is adapted from the SpacemiT vendor tree [2].
> > > 
> > > This minimal device tree enables booting into a serial console with UART
> > > output and a blinking LED.
> > > 
> > > Link:
> > > https://developer.spacemit.com/documentation?token=YJtdwnvvViPVcmkoPDpcvwfVnrh&type=pdf [1]
> > > https://gitee.com/bianbu-linux/linux-6.6/blob/k1-bl-v2.2.y/arch/riscv/boot/dts/spacemit/k1-x_MUSE-Pi-Pro.dts [2]
> > > 
> > same as patch 1
> > > Signed-off-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
> > > ---
..[snip]
> > 
> > while you are here, I'd suggest to push as many features as possible
> > instead of this minimal DT, which say - PMU, emmc, ethernet should be ready..
> > (ethernet is in next, should show up at v6.18-rc1)
> Good idea.
> I think I should split these into multiple commits, right?
> Like, PDMA and EMAC should definitely be two separate commits.
> 
IMO, not really necessary, but I wouldn't mind either..

-- 
Yixun Lan (dlan)