[PATCH 08/10] riscv/arm64: dts: cv18xx: Add sysctl and reset nodes
Inochi Amaoto
inochiama at gmail.com
Mon Feb 10 04:29:31 PST 2025
On Mon, Feb 10, 2025 at 12:47:59PM +0100, Alexander Sverdlin wrote:
> Thanks for quick feedback Inochi!
>
> On Mon, 2025-02-10 at 13:13 +0800, Inochi Amaoto wrote:
> > On Sun, Feb 09, 2025 at 11:06:33PM +0100, Alexander Sverdlin wrote:
> > > Add reset controller node and required sysctl nodes.
> > >
> > > Signed-off-by: Alexander Sverdlin <alexander.sverdlin at gmail.com>
> > > ---
> > > arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi | 16 ++++++++++++++++
> > > 1 file changed, 16 insertions(+)
> > >
> > > diff --git a/arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi
> > > index 53834b0658b2..d793b6db4ed1 100644
> > > --- a/arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi
> > > +++ b/arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi
> > > @@ -309,5 +309,21 @@ dmac: dma-controller at 4330000 {
> > > snps,data-width = <4>;
> > > status = "disabled";
> > > };
> > > +
> >
> > > + rtcsys_ctrl: syscon at 5025000 {
> > > + compatible = "sophgo,cv1800-rtcsys-ctrl", "syscon";
> > > + reg = <0x05025000 0x1000>;
> > > + };
> > > +
> > > + rtcsys_core: syscon at 5026000 {
> > > + compatible = "sophgo,cv1800-rtcsys-core", "syscon";
> > > + reg = <0x05026000 0x1000>;
> > > + };
> > > +
> > > + soc-reset {
> > > + compatible = "sophgo,cv1800-reset";
> > > + sophgo,rtcsys-ctrl = <&rtcsys_ctrl>;
> > > + sophgo,rtcsys-core = <&rtcsys_core>;
> > > + };
> >
> > I think these node is not suitable for riscv. It should use SBI SRST
> > extension to restart.
>
> Independent from the particular form, or its correctness, this is still HW
> description, right? It would be a "policy" for the kernel configuration, if
> the particular build would rely on the FW or a kernel driver to reboot.
>
> In other words, the HW block remains in place, no matter if it's controlled
> by a kernel module or a FW. What the point in hiding it from the RiscV part
> of DT, keeping on ARM64 side only?
>
Yeah, I have make a mistake, the device is needed. SBI need these
device definition to handle some power event.
Regards,
Inochi
More information about the linux-riscv
mailing list