[PATCH 08/10] riscv/arm64: dts: cv18xx: Add sysctl and reset nodes

[Alexander Sverdlin]

Thanks for quick feedback Inochi!

On Mon, 2025-02-10 at 13:13 +0800, Inochi Amaoto wrote:
> On Sun, Feb 09, 2025 at 11:06:33PM +0100, Alexander Sverdlin wrote:
> > Add reset controller node and required sysctl nodes.
> > 
> > Signed-off-by: Alexander Sverdlin <alexander.sverdlin at gmail.com>
> > ---
> >   arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi | 16 ++++++++++++++++
> >   1 file changed, 16 insertions(+)
> > 
> > diff --git a/arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi
> > index 53834b0658b2..d793b6db4ed1 100644
> > --- a/arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi
> > +++ b/arch/riscv/boot/dts/sophgo/cv18xx-periph.dtsi
> > @@ -309,5 +309,21 @@ dmac: dma-controller at 4330000 {
> >   			snps,data-width = <4>;
> >   			status = "disabled";
> >   		};
> > +
> 
> > +		rtcsys_ctrl: syscon at 5025000 {
> > +			compatible = "sophgo,cv1800-rtcsys-ctrl", "syscon";
> > +			reg = <0x05025000 0x1000>;
> > +		};
> > +
> > +		rtcsys_core: syscon at 5026000 {
> > +			compatible = "sophgo,cv1800-rtcsys-core", "syscon";
> > +			reg = <0x05026000 0x1000>;
> > +		};
> > +
> > +		soc-reset {
> > +			compatible = "sophgo,cv1800-reset";
> > +			sophgo,rtcsys-ctrl = <&rtcsys_ctrl>;
> > +			sophgo,rtcsys-core = <&rtcsys_core>;
> > +		};
> 
> I think these node is not suitable for riscv. It should use SBI SRST
> extension to restart.

Independent from the particular form, or its correctness, this is still HW
description, right? It would be a "policy" for the kernel configuration, if
the particular build would rely on the FW or a kernel driver to reboot.

In other words, the HW block remains in place, no matter if it's controlled
by a kernel module or a FW. What the point in hiding it from the RiscV part
of DT, keeping on ARM64 side only?

-- 
Alexander Sverdlin.