[PATCH v1 v1 2/7] dt-bindings: display: Add yamls for JH7110 display system

[Conor Dooley]

On Tue, Aug 01, 2023 at 06:10:25PM +0800, Keith Zhao wrote:
> StarFive SoCs JH7110 display system:
> lcd-controller bases verisilicon dc8200 IP,
> and hdmi bases Innosilicon IP.
> Add bindings for them.

Please, you can use more than 46 characters in a line!

Also, "v1 v1" does not a v2 make.

> 
> Signed-off-by: Keith Zhao <keith.zhao at starfivetech.com>
> ---
>  .../starfive/starfive,display-subsystem.yaml  |  41 +++++++
>  .../starfive/starfive,jh7110-dc8200.yaml      | 107 ++++++++++++++++++
>  .../starfive/starfive,jh7110-inno-hdmi.yaml   |  92 +++++++++++++++
>  3 files changed, 240 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
> new file mode 100644
> index 000000000..86018a8e6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/starfive/starfive,display-subsystem.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Starfive DRM master device
> +
> +maintainers:
> +  - Keith Zhao <keith.zhao at starfivetech.com>
> +  - ShengYang Chen <shengyang.chen at starfivetech.com>
> +
> +description:
> +  The Starfive DRM master device is a virtual device needed to list all
> +  display controller or other display interface nodes that comprise the
> +  graphics subsystem.
> +
> +properties:
> +  compatible:
> +    const: starfive,display-subsystem
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    description: |

A | is not needed when you do not have formatting to preserve.

> +      Should contain a list of phandles pointing to display interface ports
> +      of display controller devices. Display controller definitions as defined
> +      in Documentation/devicetree/bindings/display/starfive/
> +      starfive,jh7110-dc8200.yaml
> +
> +required:
> +  - compatible
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    display-subsystem {
> +        compatible = "starfive,display-subsystem";
> +        ports = <&dc_out>;
> +    };

Given Rob's bot complains, it looks like you never tested this.

> diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
> new file mode 100644
> index 000000000..bebe2050c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
> @@ -0,0 +1,107 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-dc8200.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive display controller
> +
> +description:
> +  The StarFive SoC uses the display controller based on Verisilicon IP
> +  to transfer the image data from a video memory
> +  buffer to an external LCD interface.
> +
> +maintainers:
> +  - Keith Zhao <keith.zhao at starfivetech.com>
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-dc8200
> +
> +  reg:
> +    maxItems: 3

What do each of these represent?

> +
> +  interrupts:
> +    items:
> +      - description: The interrupt will be generated when DC finish one frame
> +
> +  clocks:
> +    items:
> +      - description: Clock for display system noc bus.
> +      - description: Pixel clock for display channel 0.
> +      - description: Pixel clock for display channel 1.
> +      - description: Clock for axi interface of display controller.
> +      - description: Core clock for display controller.
> +      - description: Clock for ahb interface of display controller.
> +      - description: External HDMI pixel clock.
> +      - description: Parent clock for pixel clock
> +
> +  clock-names:
> +    items:
> +      - const: vout_noc_disp
> +      - const: vout_pix0
> +      - const: vout_pix1
> +      - const: vout_axi
> +      - const: vout_core
> +      - const: vout_vout_ahb
> +      - const: hdmitx0_pixel
> +      - const: vout_dc8200
> +
> +  resets:
> +    items:
> +      - description: Reset for axi interface of display controller.
> +      - description: Reset for ahb interface of display controller.
> +      - description: Core reset of display controller.
> +
> +  reset-names:
> +    items:
> +      - const: vout_axi
> +      - const: vout_ahb
> +      - const: vout_core

Please trim all the vouts from here & the clocks - especially the one
named "vout_vout_ahb".

> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description:
> +      A port node with endpoint definitions as defined in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt.

This file is empty, it has been converted to yaml.

> diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
> new file mode 100644
> index 000000000..f6927acf6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-inno-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Starfive JH7110 HDMI controller
> +
> +description:
> +  The StarFive JH7110 SoC uses the HDMI signal transmiter based on innosilicon IP
> +  to generate HDMI signal from its input and transmit the signal to the screen.
> +
> +maintainers:
> +  - Keith Zhao <keith.zhao at starfivetech.com>
> +
> +properties:
> +  compatible:
> +    const: "starfive,jh7110-inno-hdmi"
> +
> +  reg:
> +    minItems: 1
> +
> +  interrupts:
> +    items:
> +      - description: The HDMI hot plug detection interrupt.
> +
> +  clocks:
> +    items:
> +      - description: System clock of HDMI module.
> +      - description: Mclk clock of HDMI audio.
> +      - description: Bclk clock of HDMI audio.
> +      - description: Pixel clock generated by HDMI module.
> +
> +  clock-names:
> +    items:
> +      - const: sysclk
> +      - const: mclk
> +      - const: bclk
> +      - const: pclk
> +
> +  resets:
> +    items:
> +      - description: Reset for HDMI module.

For this & resets, you don't have a list & don't need items:

Cheers,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230801/5aac1e5d/attachment.sig>