[PATCH v1 v1 2/7] dt-bindings: display: Add yamls for JH7110 display system

[Maxime Ripard]

Hi,

On Tue, Aug 01, 2023 at 06:10:25PM +0800, Keith Zhao wrote:
> diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
> new file mode 100644
> index 000000000..bebe2050c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
> @@ -0,0 +1,107 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-dc8200.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive display controller
> +
> +description:
> +  The StarFive SoC uses the display controller based on Verisilicon IP
> +  to transfer the image data from a video memory
> +  buffer to an external LCD interface.
> +
> +maintainers:
> +  - Keith Zhao <keith.zhao at starfivetech.com>
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-dc8200
> +
> +  reg:
> +    maxItems: 3

What these registers are used for must be documented.

> +
> +  interrupts:
> +    items:
> +      - description: The interrupt will be generated when DC finish one frame
> +
> +  clocks:
> +    items:
> +      - description: Clock for display system noc bus.
> +      - description: Pixel clock for display channel 0.
> +      - description: Pixel clock for display channel 1.
> +      - description: Clock for axi interface of display controller.
> +      - description: Core clock for display controller.
> +      - description: Clock for ahb interface of display controller.
> +      - description: External HDMI pixel clock.
> +      - description: Parent clock for pixel clock
> +
> +  clock-names:
> +    items:
> +      - const: vout_noc_disp
> +      - const: vout_pix0
> +      - const: vout_pix1
> +      - const: vout_axi
> +      - const: vout_core
> +      - const: vout_vout_ahb
> +      - const: hdmitx0_pixel
> +      - const: vout_dc8200

The clock-names should reflect what they are used for on the device, not
what their name is in the system. So it should rather be something like
"noc-bus", "channel0", "channel1", etc.

vout, or the soc model, shouldn't appear there.

> +  resets:
> +    items:
> +      - description: Reset for axi interface of display controller.
> +      - description: Reset for ahb interface of display controller.
> +      - description: Core reset of display controller.
> +
> +  reset-names:
> +    items:
> +      - const: vout_axi
> +      - const: vout_ahb
> +      - const: vout_core

Ditto.

Also, I'm a bit confused, how can a device be attached to both an AXI
and AHB bus? That, plus the multiple registers spaces, make me think
that this is multiple devices glued together in a single node, which
isn't ok.

> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description:
> +      A port node with endpoint definitions as defined in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    dc8200: lcd-controller at 29400000 {
> +        compatible = "starfive,jh7110-dc8200";
> +        reg = <0x29400000 0x100>, <0x29400800 0x2000>, <0x295b0000 0x90>;
> +        interrupts = <95>;
> +        clocks = <&syscrg 60>,
> +               <&voutcrg 7>,
> +               <&voutcrg 8>,
> +               <&voutcrg 4>,
> +               <&voutcrg 5>,
> +               <&voutcrg 6>,
> +               <&hdmitx0_pixelclk>,
> +               <&voutcrg 1>;
> +        clock-names = "vout_noc_disp", "vout_pix0", "vout_pix1",
> +                      "vout_axi", "vout_core", "vout_vout_ahb",
> +                      "hdmitx0_pixel","vout_dc8200";
> +        resets = <&voutcrg 0>, <&voutcrg 1>, <&voutcrg 2>;
> +        reset-names = "vout_axi", "vout_ahb", "vout_core";
> +        dc_out: port {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            dc_out_hdmi: endpoint at 0 {
> +                reg = <0>;
> +                remote-endpoint = <&hdmi_in_dc>;
> +            };
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
> new file mode 100644
> index 000000000..f6927acf6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-inno-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Starfive JH7110 HDMI controller
> +
> +description:
> +  The StarFive JH7110 SoC uses the HDMI signal transmiter based on innosilicon IP
> +  to generate HDMI signal from its input and transmit the signal to the screen.
> +
> +maintainers:
> +  - Keith Zhao <keith.zhao at starfivetech.com>
> +
> +properties:
> +  compatible:
> +    const: "starfive,jh7110-inno-hdmi"
> +
> +  reg:
> +    minItems: 1
> +
> +  interrupts:
> +    items:
> +      - description: The HDMI hot plug detection interrupt.
> +
> +  clocks:
> +    items:
> +      - description: System clock of HDMI module.
> +      - description: Mclk clock of HDMI audio.
> +      - description: Bclk clock of HDMI audio.
> +      - description: Pixel clock generated by HDMI module.
> +
> +  clock-names:
> +    items:
> +      - const: sysclk
> +      - const: mclk
> +      - const: bclk
> +      - const: pclk
> +
> +  resets:
> +    items:
> +      - description: Reset for HDMI module.
> +
> +  reset-names:
> +    items:
> +      - const: hdmi_tx

If there's only one you don't need reset-names

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230801/8c900e06/attachment.sig>