[PATCH v1 v1 3/7] riscv: dts: starfive: jh7110: add dc controller and hdmi node
Keith Zhao
keith.zhao at starfivetech.com
Tue Aug 1 03:10:26 PDT 2023
Add the dc controller and hdmi node for the Starfive JH7110 SoC.
Signed-off-by: Keith Zhao <keith.zhao at starfivetech.com>
---
.../jh7110-starfive-visionfive-2.dtsi | 87 +++++++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 43 +++++++++
2 files changed, 130 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index de0f40a8b..32e5cc96c 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -31,6 +31,21 @@ memory at 40000000 {
reg = <0x0 0x40000000 0x1 0x0>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x20000000>;
+ alignment = <0x0 0x1000>;
+ alloc-ranges = <0x0 0x80000000 0x0 0x20000000>;
+ linux,cma-default;
+ };
+ };
+
gpio-restart {
compatible = "gpio-restart";
gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
@@ -231,6 +246,41 @@ GPOEN_DISABLE,
slew-rate = <0>;
};
};
+
+ hdmi_pins: hdmi-0 {
+ hdmi-scl-pins {
+ pinmux = <GPIOMUX(0, GPOUT_SYS_HDMI_DDC_SCL,
+ GPOEN_SYS_HDMI_DDC_SCL,
+ GPI_SYS_HDMI_DDC_SCL)>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ hdmi-sda-pins {
+ pinmux = <GPIOMUX(1, GPOUT_SYS_HDMI_DDC_SDA,
+ GPOEN_SYS_HDMI_DDC_SDA,
+ GPI_SYS_HDMI_DDC_SDA)>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ hdmi-cec-pins {
+ pinmux = <GPIOMUX(14, GPOUT_SYS_HDMI_CEC_SDA,
+ GPOEN_SYS_HDMI_CEC_SDA,
+ GPI_SYS_HDMI_CEC_SDA)>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ hdmi-hpd-pins {
+ pinmux = <GPIOMUX(15, GPOUT_HIGH,
+ GPOEN_ENABLE,
+ GPI_SYS_HDMI_HPD)>;
+ input-enable;
+ bias-disable; /* external pull-up */
+ };
+ };
+
};
&uart0 {
@@ -254,3 +304,40 @@ &U74_3 {
&U74_4 {
cpu-supply = <&vdd_cpu>;
};
+
+&voutcrg {
+ status = "okay";
+};
+
+&display {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_dc: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&dc_out_hdmi>;
+ };
+ };
+};
+
+&dc8200 {
+ status = "okay";
+
+ dc_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dc_out_hdmi: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_dc>;
+ };
+
+ };
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 0005fa163..b8c527d9f 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -282,6 +282,11 @@ tdm_ext: tdm-ext-clock {
#clock-cells = <0>;
};
+ display: display-subsystem {
+ compatible = "starfive,display-subsystem";
+ ports = <&dc_out>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&plic>;
@@ -613,5 +618,43 @@ voutcrg: clock-controller at 295c0000 {
#reset-cells = <1>;
power-domains = <&pwrc JH7110_PD_VOUT>;
};
+
+ dc8200: lcd-controller at 29400000 {
+ compatible = "starfive,jh7110-dc8200";
+ reg = <0x0 0x29400000 0x0 0x100>,
+ <0x0 0x29400800 0x0 0x2000>,
+ <0x0 0x295b0000 0x0 0x90>;
+ interrupts = <95>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_DISP_AXI>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_PIX0>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_PIX1>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_AXI>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_CORE>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_AHB>,
+ <&hdmitx0_pixelclk>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_PIX>;
+ clock-names = "vout_noc_disp", "vout_pix0", "vout_pix1",
+ "vout_axi", "vout_core", "vout_vout_ahb",
+ "hdmitx0_pixel", "vout_dc8200";
+ resets = <&voutcrg JH7110_VOUTRST_DC8200_AXI>,
+ <&voutcrg JH7110_VOUTRST_DC8200_AHB>,
+ <&voutcrg JH7110_VOUTRST_DC8200_CORE>;
+ reset-names = "vout_axi","vout_ahb", "vout_core";
+ };
+
+ hdmi: hdmi at 29590000 {
+ compatible = "starfive,jh7110-inno-hdmi";
+ reg = <0x0 0x29590000 0x0 0x4000>;
+ interrupts = <99>;
+
+ clocks = <&voutcrg JH7110_VOUTCLK_HDMI_TX_SYS>,
+ <&voutcrg JH7110_VOUTCLK_HDMI_TX_MCLK>,
+ <&voutcrg JH7110_VOUTCLK_HDMI_TX_BCLK>,
+ <&hdmitx0_pixelclk>;
+ clock-names = "sysclk", "mclk", "bclk", "pclk";
+ resets = <&voutcrg JH7110_VOUTRST_HDMI_TX_HDMI>;
+ reset-names = "hdmi_tx";
+ #sound-dai-cells = <0>;
+ };
};
};
--
2.34.1
More information about the linux-riscv
mailing list