[PATCH v3 3/3] phy: tegra: Add support for Tegra238 XUSB pad controller

[Jon Hunter]

On 07/10/2026 16:20, Manivannan Sadhasivam wrote:
> On Wed, Oct 07, 2026 at 03:44:43PM +0100, Jon Hunter wrote:
>> Add support for the Tegra238 XUSB pad controller by populating the
>> Tegra238 specific SoC data for the controller. The Tegra238 has three
>> USB2 and USB3 ports, uses the same port ops as Tegra186 and has the
>> same supplies as Tegra194. Due to the dependencies the Tegra238 device
>> has on the Tegra186 port ops and Tegra194 supplies, drop the compile
>> time guards around these structures.
>>
>> Signed-off-by: Jon Hunter <jonathanh at nvidia.com>
>> ---
>>   drivers/phy/tegra/Makefile        |  1 +
>>   drivers/phy/tegra/xusb-tegra186.c | 29 +++++++++++++++++++++++------
>>   drivers/phy/tegra/xusb.c          |  6 ++++++
>>   drivers/phy/tegra/xusb.h          |  3 +++
>>   4 files changed, 33 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
>> index f5ed9582d80b..018a4cab2b40 100644
>> --- a/drivers/phy/tegra/Makefile
>> +++ b/drivers/phy/tegra/Makefile
>> @@ -8,6 +8,7 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
>>   phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
>>   phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_194_SOC) += xusb-tegra186.o
>>   phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_234_SOC) += xusb-tegra186.o
>> +phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_238_SOC) += xusb-tegra186.o
>>   phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_264_SOC) += xusb-tegra186.o
> 
> This is just a mess. As a followup patch, could you please please switch to
> generic ARCH_TEGRA Kconfig option as done in this commit, 6b5e2f70a95c
> ("PCI: dwc: tegra194: Broaden architecture dependency")?

Yes that would be a good idea and yes I can do that as a follow-up.

Jon

-- 
nvpublic