[PATCH v3 3/3] phy: tegra: Add support for Tegra238 XUSB pad controller

[Manivannan Sadhasivam]

On Wed, Oct 07, 2026 at 03:44:43PM +0100, Jon Hunter wrote:
> Add support for the Tegra238 XUSB pad controller by populating the
> Tegra238 specific SoC data for the controller. The Tegra238 has three
> USB2 and USB3 ports, uses the same port ops as Tegra186 and has the
> same supplies as Tegra194. Due to the dependencies the Tegra238 device
> has on the Tegra186 port ops and Tegra194 supplies, drop the compile
> time guards around these structures.
> 
> Signed-off-by: Jon Hunter <jonathanh at nvidia.com>
> ---
>  drivers/phy/tegra/Makefile        |  1 +
>  drivers/phy/tegra/xusb-tegra186.c | 29 +++++++++++++++++++++++------
>  drivers/phy/tegra/xusb.c          |  6 ++++++
>  drivers/phy/tegra/xusb.h          |  3 +++
>  4 files changed, 33 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
> index f5ed9582d80b..018a4cab2b40 100644
> --- a/drivers/phy/tegra/Makefile
> +++ b/drivers/phy/tegra/Makefile
> @@ -8,6 +8,7 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_194_SOC) += xusb-tegra186.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_234_SOC) += xusb-tegra186.o
> +phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_238_SOC) += xusb-tegra186.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_264_SOC) += xusb-tegra186.o

This is just a mess. As a followup patch, could you please please switch to
generic ARCH_TEGRA Kconfig option as done in this commit, 6b5e2f70a95c
("PCI: dwc: tegra194: Broaden architecture dependency")?

- Mani

-- 
மணிவண்ணன் சதாசிவம்