[PATCH 4/8] arm64: dts: qcom: sm8450: Add missing PCM_OUT port

[Esteban Urrutia via B4 Relay]

From: Esteban Urrutia <esteuwu at proton.me>

An error in dmesg shows there is a mismatch between controller and DT
dout-ports.
Add PCM_OUT port to fix this.

Signed-off-by: Esteban Urrutia <esteuwu at proton.me>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 5e331a25e22a..8fc58a02e5c5 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2914,20 +2914,20 @@ swr1: soundwire at 3210000 {
 			clock-names = "iface";
 			label = "RX";
 			qcom,din-ports = <0>;
-			qcom,dout-ports = <5>;
+			qcom,dout-ports = <6>;
 
 			pinctrl-0 = <&rx_swr_active>;
 			pinctrl-names = "default";
 
-			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
-			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
-			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
-			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00>;
 
 			#address-cells = <2>;
 			#size-cells = <0>;

-- 
2.54.0