[PATCH 3/8] arm64: dts: qcom: sm8450: Modify GPU operating points

[Konrad Dybcio]

On 6/23/26 2:54 AM, Esteban Urrutia via B4 Relay wrote:
> From: Esteban Urrutia <esteuwu at proton.me>
> 
> These frecuencies don't exist in downstream device trees.
> Both 220MHz and 285MHz belong to SM8475, and I'm not sure where 317MHz
> came from.
> 
> Signed-off-by: Esteban Urrutia <esteuwu at proton.me>
> ---
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 15 ---------------
>  1 file changed, 15 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index e34e3c05bf74..5e331a25e22a 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -2495,21 +2495,6 @@ opp-350000000 {
>  					opp-hz = /bits/ 64 <350000000>;
>  					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>  				};
> -
> -				opp-317000000 {
> -					opp-hz = /bits/ 64 <317000000>;
> -					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> -				};
> -
> -				opp-285000000 {
> -					opp-hz = /bits/ 64 <285000000>;
> -					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
> -				};
> -
> -				opp-220000000 {
> -					opp-hz = /bits/ 64 <220000000>;
> -					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
> -				};

These are valid frequency points, although downstream didn't advertize
them.

Funnily enough, the frequency plan lists them as:

LOWSVS_D2 -> 317 MHz // in downstream, at LOW_SVS
LOWSVS_D1 -> 285 MHz // in downstream as-is
LOWSVS_D0 -> 220 MHz // in downstream, LOW_SVS_D1
(the above are what it says in the doc, yes, lower voltage for
higher frequencies.. certainly seems like a bug..)

LOW_SVS   -> 350 Mhz // this and the following are in downstream too
LOW_SVS_L1-> 421 MHz
SVS	  -> 492 MHz
SVS_L0 	  -> 545 MHz
SVS_L1    -> 599 MHz
SVS_L2    -> 640 MHz
NOM       -> 734 MHz
NOM_L1    -> 791 MHz
TURBO     -> 818 MHz

so in short, the existing map seems to be OK

Konrad