[PATCH 4/8] arm64: dts: qcom: sm8450: Add missing PCM_OUT port

[sashiko-bot at kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Silent and likely accidental modification of the sample interval for the second SoundWire port from 0x1f to 0x3f.
--

commit c423fe48b88cf765efc50ccc2d69ba6fafa2266a
Author: Esteban Urrutia <esteuwu at proton.me>

arm64: dts: qcom: sm8450: Add missing PCM_OUT port

This commit updates the sm8450 device tree to add a missing PCM_OUT port
to the soundwire RX controller, incrementing the dout-ports count from 5
to 6. It also expands the corresponding configuration arrays, migrating the
ports-sinterval array to 16 bits to accommodate the new 0x18f value.

> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 5e331a25e22a2..8fc58a02e5c51 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -2914,20 +2914,20 @@ swr1: soundwire at 3210000 {

[ ... ]

> -			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
> -			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
> -			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
> -			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
> -			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
> -			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
> -			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
> -			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
> -			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
> +			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f>;

[Severity: Medium]
Was it intended to change the sample interval of the second port from 0x1f to
0x3f when migrating to the 16-bit array here in swr1: soundwire at 3210000?

Could this regression cause a configuration mismatch between the SoundWire
controller and the expected transport window of the codec?

An incorrect sample interval might break Class-H envelope tracking or cause
SoundWire bus errors on the RX macro when the controller is initialized and
negotiates port parameters.

> +			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00>;
> +			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00>;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260622-sm8450-qol-v1-0-37e2ee8df9da@proton.me?part=4