PCMCIA Problem Kernel 2.6.11-rc3-bk7

[Andreas Millinger]

Hello,

I have compiled a Kernel 2.6.11-rc3-bk7 under Suse Linux 9.2. I also 
have a Kernel 2.6.10 running. When I shutdown the Laptop with no card 
inserted, an Error occurse:

FATAL: Module yenta_socket is in use

With a 3com Bluetooth PCMCIA Card there is a freez at shutdown wih the 
following error:

Shuting down PCMCIA cardmgr [3595]: check cmd exited with status 1
cardmgr[3595]: exiting: `./serial stop ttyS16 2>&1`
cardmgr[3595]: +/dev/ttyS16:

With 2.6.10 there isn't any problem. The output of lspci is:

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8605 [ProSavage PM133]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8605 [PM133 AGP]
0000:00:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
0000:00:06.0 Communication controller: Ambient Technologies Inc HaM 
controllerless modem (rev02)
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super 
South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 1a)
0000:00:07.4 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super 
ACPI] (rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. 
VT82C686 AC97 Audio Controller (rev 50)
0000:00:0c.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller 
(rev 01)
0000:00:0c.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller 
(rev 01)
0000:00:0d.0 FireWire (IEEE 1394): Agere Systems (former Lucent 
Microelectronics) FW323 (rev 04)
0000:01:00.0 VGA compatible controller: S3 Inc. 86C380 [ProSavageDDR 
K4M266] (rev 02)

Have there been changes in the Kernel modules of 2.6.11-rc3-bk7, that 
causes that problem? Or do I have to change the initscript?

Best regards

Andreas