Unable to apply power.

Russell King rmk+pcmcia at arm.linux.org.uk
Fri Jun 18 12:17:28 EDT 2004


On Fri, Jun 18, 2004 at 11:59:04AM -0400, Adam K Kirchhoff wrote:
>     Were you able to use this to identify the problem?

Not really - the only difference between the two shows that a card was
inserted.  No sign of any other changes.

Could you try applying this patch and reporting the extra kernel messages
please?  It may also be a good idea to add:

EXTRA_CFLAGS := -DDEBUG

into drivers/pcmcia/Makefile and pass "pcmcia_core.pc_debug=5" to the
kernel at boot (if you've built pcmcia into the kernel) or pc_debug=5
when pcmcia_core is inserted (if as a module.)

Thanks.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core



More information about the linux-pcmcia mailing list