Having problem with a sever which has 18 PCI slots to run 18 PCMC IA cards

[Khamar, Kalpit K (Kalpit)]

Hi Dominik,
Below is the resource file /etc/pcmcia/config.opts
Please let me know if you need more information.
Thanks
Kalpit

#
# Local PCMCIA Configuration File
#
#----------------------------------------------------------------------
#
# System resources available for PCMCIA cards
#
# NOTE: these settings have no effect on resources assigned to a
# CardBus bridge device itself; this file only affects resources
# assigned to cards.  Also, interrupt settings here will only affect
# ISA bus interrupts assigned to 16-bit cards.  PCI interrupts
# generally can't be reconfigured.
#
# With the kernel PCMCIA subsystem, these settings also have no effect
# at all on resources used for 32-bit CardBus cards.  Those are set by
# the PCI hotplug subsystem.
#

include port 0x100-0x4ff, port 0xc00-0xcff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff, memory 0xf8500000-0xf87fffff
# High port numbers do not always work...
# include port 0x1000-0x17ff

# Extra port range for IBM Token Ring
include port 0xa00-0xaff
include port 0x8000-0xdfff
# Resources we should not use, even if they appear to be available

# First built-in serial port
exclude irq 4
# Second built-in serial port
#exclude irq 3
# First built-in parallel port
exclude irq 7
# PS/2 Mouse controller port, comment this out if you don't have a PS/2
# based mouse
exclude irq 12
# Radeon ICP MCE's if you touch ports 380 to 3ff
exclude port 0x380-0x3ff

#----------------------------------------------------------------------

# Examples of options for loadable modules

# To fix sluggish network with IBM ethernet adapter...
#module "pcnet_cs" opts "mem_speed=600"

# Options for IBM Token Ring adapters
#module "ibmtr_cs" opts "mmiobase=0xd0000 srambase=0xd4000"

# Options for Raylink/WebGear driver: uncomment only one line...
# Generic ad-hoc network
module "ray_cs" opts "essid=ADHOC_ESSID hop_dwell=128 beacon_period=256 translate=1"
# Infrastructure network for older cards
#module "ray_cs" opts "net_type=1 essid=ESSID1"
# Infrastructure network for WebGear
#module "ray_cs" opts "net_type=1 essid=ESSID1 translate=1 hop_dwell=128 beacon_period=256"

# Options for WaveLAN/IEEE driver (AccessPoint mode)...
#module "wvlan_cs" opts "station_name=MY_PC"
# Options for WaveLAN/IEEE driver (ad-hoc mode)...
#module "wvlan_cs" opts "port_type=3 channel=1 station_name=MY_PC"

# Options for Xircom Netwave driver...
#module "netwave_cs" opts "domain=0x100 scramble_key=0x0"




-----Original Message-----
From: Dominik Brodowski [mailto:linux at dominikbrodowski.de]
Sent: Thursday, December 16, 2004 4:58 PM
To: Khamar, Kalpit K (Kalpit)
Cc: 'linux-pcmcia-request at lists.infradead.org';
'linux-pcmcia at lists.infradead.org'
Subject: Re: Having problem with a sever which has 18 PCI slots to run
18 PCMC IA cards


What resources do you make available in /etc/pcmcia/config.opts?

	Dominik