[GIT PULL] mtd: nand: Changes for 5.19
Miquel Raynal
miquel.raynal at bootlin.com
Wed May 18 02:40:17 PDT 2022
Hello,
This is the NAND PR for v5.19-rc1.
Thanks,
Miquèl
The following changes since commit 3123109284176b1532874591f7c81f3837bbdc17:
Linux 5.18-rc1 (2022-04-03 14:08:21 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/nand/for-5.19
for you to fetch changes up to 6a2277a0ebe71b45e1d5508a2d7aecd28c98e3d3:
mtd: rawnand: renesas: Use runtime PM instead of the raw clock API (2022-05-16 18:36:21 +0200)
----------------------------------------------------------------
NAND core:
* Print offset instead of page number for bad blocks
Raw NAND controller drivers:
* Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
* CS553X: simplify the return expression of cs553x_write_ctrl_byte()
* Davinci: Remove redundant unsigned comparison to zero
* Denali: Use managed device resources
* GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
* Intel: Fix possible null-ptr-deref in ebu_nand_probe()
* MPC5121: Check before clk_disable_unprepare() not needed
* Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
* OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
* Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
* Rockchip: Check before clk_disable_unprepare() not needed
* TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
* Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
* Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
* XTX: Add support for XT26G0xA
----------------------------------------------------------------
Andreas Böhler (1):
mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash
Chuanhong Guo (7):
mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG
mtd: spinand: gigadevice: add support for GD5FxGQ4xExxG
mtd: spinand: gigadevice: add support for GD5F1GQ5RExxG
mtd: spinand: gigadevice: add support for GD5F{2, 4}GQ5xExxG
mtd: spinand: gigadevice: add support for GD5FxGM7xExxG
mtd: nand: make mtk_ecc.c a separated module
mtd: nand: mtk-ecc: also parse nand-ecc-engine if available
Felix Matouschek (1):
mtd: spinand: Add support for XTX XT26G0xA
Geert Uytterhoeven (1):
mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
Han Xu (5):
mtd: rawnand: gpmi: Refactor bch geometry settings function
mtd: rawnand: gpmi: Add strict ecc strength check
mtd: rawnand: gpmi: Uninline the gpmi_check_ecc function
mtd: rawnand: gpmi: Rename the variable ecc_chunk_size
mtd: rawnand: gpmi: Add large oob bch setting support
Minghao Chi (1):
mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte()
Miquel Raynal (3):
Merge tag 'mtd/mtk-spi-nand-for-5.19' into nand/next
dt-bindings: mtd: renesas: Fix the NAND controller description
mtd: rawnand: renesas: Use runtime PM instead of the raw clock API
Phil Edworthy (2):
mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed
mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed
Rafał Miłecki (1):
mtd: rawnand: print offset instead of page number for bad blocks
Rickard x Andersson (1):
mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4
Roger Quadros (3):
dt-bindings: mtd: ti,elm: Convert to yaml
dt-bindings: mtd: ti,elm: Add support for AM64 ELM
mtd: rawnand: omap_elm: Add compatible for AM64 ELM
Wang Weiyang (1):
mtd: rawnand: davinci: Remove redundant unsigned comparison to zero
Yang Yingliang (3):
mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()
mtd: rawnand: intel: fix possible null-ptr-deref in ebu_nand_probe()
mtd: rawnand: tmio: check return value after calling platform_get_resource()
Zheyu Ma (1):
mtd: rawnand: denali: Use managed device resources
Documentation/devicetree/bindings/mtd/elm.txt | 16 ------
Documentation/devicetree/bindings/mtd/renesas-nandc.yaml | 5 ++
Documentation/devicetree/bindings/mtd/ti,elm.yaml | 72 +++++++++++++++++++++++++
drivers/mtd/nand/Kconfig | 8 +++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/{raw/mtk_ecc.c => ecc-mtk.c} | 8 +--
drivers/mtd/nand/raw/Kconfig | 1 +
drivers/mtd/nand/raw/Makefile | 2 +-
drivers/mtd/nand/raw/cadence-nand-controller.c | 5 +-
drivers/mtd/nand/raw/cs553x_nand.c | 7 +--
drivers/mtd/nand/raw/davinci_nand.c | 2 +-
drivers/mtd/nand/raw/denali_pci.c | 15 ++----
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 296 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h | 12 +++--
drivers/mtd/nand/raw/intel-nand-controller.c | 2 +-
drivers/mtd/nand/raw/mpc5121_nfc.c | 3 +-
drivers/mtd/nand/raw/mtk_nand.c | 2 +-
drivers/mtd/nand/raw/nand_base.c | 9 ++--
drivers/mtd/nand/raw/nand_ids.c | 6 +++
drivers/mtd/nand/raw/nand_toshiba.c | 6 ++-
drivers/mtd/nand/raw/omap_elm.c | 1 +
drivers/mtd/nand/raw/renesas-nand-controller.c | 51 ++++++++----------
drivers/mtd/nand/raw/rockchip-nand-controller.c | 20 ++++---
drivers/mtd/nand/raw/tmio_nand.c | 3 ++
drivers/mtd/nand/spi/Makefile | 2 +-
drivers/mtd/nand/spi/core.c | 1 +
drivers/mtd/nand/spi/gigadevice.c | 158 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
drivers/mtd/nand/spi/xtx.c | 129 ++++++++++++++++++++++++++++++++++++++++++++
drivers/mtd/nand/raw/mtk_ecc.h => include/linux/mtd/nand-ecc-mtk.h | 0
include/linux/mtd/spinand.h | 1 +
30 files changed, 708 insertions(+), 136 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mtd/elm.txt
create mode 100644 Documentation/devicetree/bindings/mtd/ti,elm.yaml
rename drivers/mtd/nand/{raw/mtk_ecc.c => ecc-mtk.c} (98%)
create mode 100644 drivers/mtd/nand/spi/xtx.c
rename drivers/mtd/nand/raw/mtk_ecc.h => include/linux/mtd/nand-ecc-mtk.h (100%)
More information about the linux-mtd
mailing list