[GIT PULL] mtd: nand: Changes for 5.19
Miquel Raynal
miquel.raynal at bootlin.com
Fri May 20 05:12:50 PDT 2022
miquel.raynal at bootlin.com wrote on Wed, 18 May 2022 11:40:17 +0200:
> Hello,
>
> This is the NAND PR for v5.19-rc1.
Pulled into mtd/next.
>
> Thanks,
> Miquèl
>
>
> The following changes since commit 3123109284176b1532874591f7c81f3837bbdc17:
>
> Linux 5.18-rc1 (2022-04-03 14:08:21 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/nand/for-5.19
>
> for you to fetch changes up to 6a2277a0ebe71b45e1d5508a2d7aecd28c98e3d3:
>
> mtd: rawnand: renesas: Use runtime PM instead of the raw clock API (2022-05-16 18:36:21 +0200)
>
> ----------------------------------------------------------------
> NAND core:
> * Print offset instead of page number for bad blocks
>
> Raw NAND controller drivers:
> * Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
> * CS553X: simplify the return expression of cs553x_write_ctrl_byte()
> * Davinci: Remove redundant unsigned comparison to zero
> * Denali: Use managed device resources
> * GPMI:
> - Add large oob bch setting support
> - Rename the variable ecc_chunk_size
> - Uninline the gpmi_check_ecc function
> - Add strict ecc strength check
> - Refactor BCH geometry settings function
> * Intel: Fix possible null-ptr-deref in ebu_nand_probe()
> * MPC5121: Check before clk_disable_unprepare() not needed
> * Mtk:
> - MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
> - Also parse the default nand-ecc-engine property if available
> - Make mtk_ecc.c a separated module
> * OMAP ELM:
> - Convert the bindings to yaml
> - Describe the bindings for AM64 ELM
> - Add support for its compatible
> * Renesas: Use runtime PM instead of the raw clock API and update the
> bindings accordingly
> * Rockchip: Check before clk_disable_unprepare() not needed
> * TMIO: Check return value after calling platform_get_resource()
>
> Raw NAND chip driver:
> * Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
>
> SPI-NAND chip drivers:
> * Gigadevice:
> - Add support for:
> - GD5FxGM7xExxG
> - GD5F{2,4}GQ5xExxG
> - GD5F1GQ5RExxG
> - GD5FxGQ4xExxG
> - Fix Quad IO for GD5F1GQ5UExxG
> * XTX: Add support for XT26G0xA
>
> ----------------------------------------------------------------
> Andreas Böhler (1):
> mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash
>
> Chuanhong Guo (7):
> mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG
> mtd: spinand: gigadevice: add support for GD5FxGQ4xExxG
> mtd: spinand: gigadevice: add support for GD5F1GQ5RExxG
> mtd: spinand: gigadevice: add support for GD5F{2, 4}GQ5xExxG
> mtd: spinand: gigadevice: add support for GD5FxGM7xExxG
> mtd: nand: make mtk_ecc.c a separated module
> mtd: nand: mtk-ecc: also parse nand-ecc-engine if available
>
> Felix Matouschek (1):
> mtd: spinand: Add support for XTX XT26G0xA
>
> Geert Uytterhoeven (1):
> mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
>
> Han Xu (5):
> mtd: rawnand: gpmi: Refactor bch geometry settings function
> mtd: rawnand: gpmi: Add strict ecc strength check
> mtd: rawnand: gpmi: Uninline the gpmi_check_ecc function
> mtd: rawnand: gpmi: Rename the variable ecc_chunk_size
> mtd: rawnand: gpmi: Add large oob bch setting support
>
> Minghao Chi (1):
> mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte()
>
> Miquel Raynal (3):
> Merge tag 'mtd/mtk-spi-nand-for-5.19' into nand/next
> dt-bindings: mtd: renesas: Fix the NAND controller description
> mtd: rawnand: renesas: Use runtime PM instead of the raw clock API
>
> Phil Edworthy (2):
> mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed
> mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed
>
> Rafał Miłecki (1):
> mtd: rawnand: print offset instead of page number for bad blocks
>
> Rickard x Andersson (1):
> mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4
>
> Roger Quadros (3):
> dt-bindings: mtd: ti,elm: Convert to yaml
> dt-bindings: mtd: ti,elm: Add support for AM64 ELM
> mtd: rawnand: omap_elm: Add compatible for AM64 ELM
>
> Wang Weiyang (1):
> mtd: rawnand: davinci: Remove redundant unsigned comparison to zero
>
> Yang Yingliang (3):
> mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()
> mtd: rawnand: intel: fix possible null-ptr-deref in ebu_nand_probe()
> mtd: rawnand: tmio: check return value after calling platform_get_resource()
>
> Zheyu Ma (1):
> mtd: rawnand: denali: Use managed device resources
>
> Documentation/devicetree/bindings/mtd/elm.txt | 16 ------
> Documentation/devicetree/bindings/mtd/renesas-nandc.yaml | 5 ++
> Documentation/devicetree/bindings/mtd/ti,elm.yaml | 72 +++++++++++++++++++++++++
> drivers/mtd/nand/Kconfig | 8 +++
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/{raw/mtk_ecc.c => ecc-mtk.c} | 8 +--
> drivers/mtd/nand/raw/Kconfig | 1 +
> drivers/mtd/nand/raw/Makefile | 2 +-
> drivers/mtd/nand/raw/cadence-nand-controller.c | 5 +-
> drivers/mtd/nand/raw/cs553x_nand.c | 7 +--
> drivers/mtd/nand/raw/davinci_nand.c | 2 +-
> drivers/mtd/nand/raw/denali_pci.c | 15 ++----
> drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 296 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------
> drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h | 12 +++--
> drivers/mtd/nand/raw/intel-nand-controller.c | 2 +-
> drivers/mtd/nand/raw/mpc5121_nfc.c | 3 +-
> drivers/mtd/nand/raw/mtk_nand.c | 2 +-
> drivers/mtd/nand/raw/nand_base.c | 9 ++--
> drivers/mtd/nand/raw/nand_ids.c | 6 +++
> drivers/mtd/nand/raw/nand_toshiba.c | 6 ++-
> drivers/mtd/nand/raw/omap_elm.c | 1 +
> drivers/mtd/nand/raw/renesas-nand-controller.c | 51 ++++++++----------
> drivers/mtd/nand/raw/rockchip-nand-controller.c | 20 ++++---
> drivers/mtd/nand/raw/tmio_nand.c | 3 ++
> drivers/mtd/nand/spi/Makefile | 2 +-
> drivers/mtd/nand/spi/core.c | 1 +
> drivers/mtd/nand/spi/gigadevice.c | 158 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
> drivers/mtd/nand/spi/xtx.c | 129 ++++++++++++++++++++++++++++++++++++++++++++
> drivers/mtd/nand/raw/mtk_ecc.h => include/linux/mtd/nand-ecc-mtk.h | 0
> include/linux/mtd/spinand.h | 1 +
> 30 files changed, 708 insertions(+), 136 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mtd/elm.txt
> create mode 100644 Documentation/devicetree/bindings/mtd/ti,elm.yaml
> rename drivers/mtd/nand/{raw/mtk_ecc.c => ecc-mtk.c} (98%)
> create mode 100644 drivers/mtd/nand/spi/xtx.c
> rename drivers/mtd/nand/raw/mtk_ecc.h => include/linux/mtd/nand-ecc-mtk.h (100%)
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
Thanks,
Miquèl
More information about the linux-mtd
mailing list