Jffs2 reports "Warning: DQ5 raised while program ...", Contiuously!

[David Woodhouse]

On Thu, 2006-05-18 at 08:27 +0000, Sreecharan Sivadevuni wrote:
>          I am running JFFS2.1 on uClinux2.4.24. My flash chip is
> SST39VF6401B. For all Write/erase/ (and may be also read) operations,
> the MTD drivers print the following warning message.  
>  "Warning: DQ5 raised while program operation was in progress, however
> operation completed OK"

Try updating to version 1.65 from CVS. I'm very wary of actually
updating the 2.4 tree with that, though.

-- 
dwmw2