[PATCH v1 09/14] arm64: dts: mediatek: mt7988: add switch node

[Andrew Lunn]

On Sun, May 11, 2025 at 04:19:25PM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w at public-files.de>
> 
> Add mt7988 builtin mt753x switch nodes.
> 
> Signed-off-by: Daniel Golle <daniel at makrotopia.org>
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> ---
>  arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 166 ++++++++++++++++++++++
>  1 file changed, 166 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> index aa0947a555aa..ab7612916a13 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> @@ -5,6 +5,7 @@
>  #include <dt-bindings/phy/phy.h>
>  #include <dt-bindings/pinctrl/mt65xx.h>
>  #include <dt-bindings/reset/mediatek,mt7988-resets.h>
> +#include <dt-bindings/leds/common.h>
>  
>  / {
>  	compatible = "mediatek,mt7988a";
> @@ -742,6 +743,171 @@ ethsys: clock-controller at 15000000 {
>  			#reset-cells = <1>;
>  		};
>  
> +		switch: switch at 15020000 {
> +			compatible = "mediatek,mt7988-switch";
> +			reg = <0 0x15020000 0 0x8000>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +			interrupt-parent = <&gic>;
> +			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> +			resets = <&ethwarp MT7988_ETHWARP_RST_SWITCH>;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				gsw_port0: port at 0 {
> +					reg = <0>;
> +					label = "wan";

I would expect the label to be in the board .dts file, since it is a
board property, not a SoC property.

	Andrew