Aw: Re: [PATCH v1 09/14] arm64: dts: mediatek: mt7988: add switch node

[Frank Wunderlich]

> Gesendet: Sonntag, 11. Mai 2025 um 18:42
> Von: "Andrew Lunn" <andrew at lunn.ch>
> Betreff: Re: [PATCH v1 09/14] arm64: dts: mediatek: mt7988: add switch node
>
> On Sun, May 11, 2025 at 04:19:25PM +0200, Frank Wunderlich wrote:
> > From: Frank Wunderlich <frank-w at public-files.de>
> > 
> > Add mt7988 builtin mt753x switch nodes.
> > 
> > Signed-off-by: Daniel Golle <daniel at makrotopia.org>
> > Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 166 ++++++++++++++++++++++
> >  1 file changed, 166 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> > index aa0947a555aa..ab7612916a13 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> > @@ -5,6 +5,7 @@
> >  #include <dt-bindings/phy/phy.h>
> >  #include <dt-bindings/pinctrl/mt65xx.h>
> >  #include <dt-bindings/reset/mediatek,mt7988-resets.h>
> > +#include <dt-bindings/leds/common.h>
> >  
> >  / {
> >  	compatible = "mediatek,mt7988a";
> > @@ -742,6 +743,171 @@ ethsys: clock-controller at 15000000 {
> >  			#reset-cells = <1>;
> >  		};
> >  
> > +		switch: switch at 15020000 {
> > +			compatible = "mediatek,mt7988-switch";
> > +			reg = <0 0x15020000 0 0x8000>;
> > +			interrupt-controller;
> > +			#interrupt-cells = <1>;
> > +			interrupt-parent = <&gic>;
> > +			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> > +			resets = <&ethwarp MT7988_ETHWARP_RST_SWITCH>;
> > +
> > +			ports {
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +
> > +				gsw_port0: port at 0 {
> > +					reg = <0>;
> > +					label = "wan";
> 
> I would expect the label to be in the board .dts file, since it is a
> board property, not a SoC property.

i will move that into the board dtsi file in v2 because "normal" bpi-r4 and 2g5 variant are same here.

regards Frank