[PATCH v1 09/14] arm64: dts: mediatek: mt7988: add switch node

[Frank Wunderlich]

Add mt7988 builtin mt753x switch nodes.

Signed-off-by: Daniel Golle <daniel at makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
---
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 166 ++++++++++++++++++++++
 1 file changed, 166 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index aa0947a555aa..ab7612916a13 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pinctrl/mt65xx.h>
 #include <dt-bindings/reset/mediatek,mt7988-resets.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	compatible = "mediatek,mt7988a";
@@ -742,6 +743,171 @@ ethsys: clock-controller at 15000000 {
 			#reset-cells = <1>;
 		};
 
+		switch: switch at 15020000 {
+			compatible = "mediatek,mt7988-switch";
+			reg = <0 0x15020000 0 0x8000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ethwarp MT7988_ETHWARP_RST_SWITCH>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gsw_port0: port at 0 {
+					reg = <0>;
+					label = "wan";
+					phy-mode = "internal";
+					phy-handle = <&gsw_phy0>;
+				};
+
+				gsw_port1: port at 1 {
+					reg = <1>;
+					label = "lan1";
+					phy-mode = "internal";
+					phy-handle = <&gsw_phy1>;
+				};
+
+				gsw_port2: port at 2 {
+					reg = <2>;
+					label = "lan2";
+					phy-mode = "internal";
+					phy-handle = <&gsw_phy2>;
+				};
+
+				gsw_port3: port at 3 {
+					reg = <3>;
+					label = "lan3";
+					phy-mode = "internal";
+					phy-handle = <&gsw_phy3>;
+				};
+
+				port at 6 {
+					reg = <6>;
+					ethernet = <&gmac0>;
+					phy-mode = "internal";
+
+					fixed-link {
+						speed = <10000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mediatek,pio = <&pio>;
+
+				gsw_phy0: ethernet-phy at 0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0>;
+					interrupts = <0>;
+					phy-mode = "internal";
+					nvmem-cells = <&phy_calibration_p0>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy0_led0: led at 0 {
+							reg = <0>;
+							function = LED_FUNCTION_LAN;
+							status = "disabled";
+						};
+
+						gsw_phy0_led1: led at 1 {
+							reg = <1>;
+							function = LED_FUNCTION_LAN;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy1: ethernet-phy at 1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+					interrupts = <1>;
+					phy-mode = "internal";
+					nvmem-cells = <&phy_calibration_p1>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy1_led0: led at 0 {
+							reg = <0>;
+							function = LED_FUNCTION_LAN;
+							status = "disabled";
+						};
+
+						gsw_phy1_led1: led at 1 {
+							reg = <1>;
+							function = LED_FUNCTION_LAN;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy2: ethernet-phy at 2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+					interrupts = <2>;
+					phy-mode = "internal";
+					nvmem-cells = <&phy_calibration_p2>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy2_led0: led at 0 {
+							reg = <0>;
+							function = LED_FUNCTION_LAN;
+							status = "disabled";
+						};
+
+						gsw_phy2_led1: led at 1 {
+							reg = <1>;
+							function = LED_FUNCTION_LAN;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy3: ethernet-phy at 3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+					interrupts = <3>;
+					phy-mode = "internal";
+					nvmem-cells = <&phy_calibration_p3>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy3_led0: led at 0 {
+							reg = <0>;
+							function = LED_FUNCTION_LAN;
+							status = "disabled";
+						};
+
+						gsw_phy3_led1: led at 1 {
+							reg = <1>;
+							function = LED_FUNCTION_LAN;
+							status = "disabled";
+						};
+					};
+				};
+			};
+		};
+
 		ethwarp: clock-controller at 15031000 {
 			compatible = "mediatek,mt7988-ethwarp";
 			reg = <0 0x15031000 0 0x1000>;
-- 
2.43.0