[PATCH v2 1/2] arm64: dts: s32g: Add S32G2/S32G3 uSDHC pinmux

[Ciprian Marian Costea]

On 9/17/2024 8:44 PM, Krzysztof Kozlowski wrote:
> On 30/08/2024 13:33, Ciprian Costea wrote:
>> From: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
>>
>> Adding 100mhz & 200mhz pinmux support for uSDHC helps to enable
>> higher speed modes for SD (SDR50, DDR50, SDR104) and
>> eMMC (such as HS200, HS400/HS400ES).
>>
>> Signed-off-by: Radu Pirea <radu-nicolae.pirea at nxp.com>
>> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
>> ---
>>   arch/arm64/boot/dts/freescale/s32g2.dtsi      | 153 ++++++++++++++++++
>>   .../arm64/boot/dts/freescale/s32g274a-evb.dts |   4 +
>>   .../boot/dts/freescale/s32g274a-rdb2.dts      |   4 +
>>   arch/arm64/boot/dts/freescale/s32g3.dtsi      | 153 ++++++++++++++++++
>>   .../boot/dts/freescale/s32g399a-rdb3.dts      |   4 +
>>   5 files changed, 318 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> index fa054bfe7d5c..7be430b78c83 100644
>> --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
>> @@ -162,6 +162,159 @@ jtag-grp4 {
>>   					slew-rate = <166>;
>>   				};
>>   			};
>> +
>> +			pinctrl_usdhc0: usdhc0grp-pins {
>> +				usdhc0-grp0 {
> 
> Are you sure that this passes dtbs_check W=1?
> 
> Best regards,
> Krzysztof
> 

Hello Krzysztof,

I've checked as follows:

$ make ARCH=arm64 CHECK_DTBS=y W=1 freescale/s32g274a-evb.dtb 
freescale/s32g274a-rdb2.dtb freescale/s32g399a-rdb3.dtb
   DTC [C] arch/arm64/boot/dts/freescale/s32g274a-evb.dtb
   DTC [C] arch/arm64/boot/dts/freescale/s32g274a-rdb2.dtb
   DTC [C] arch/arm64/boot/dts/freescale/s32g399a-rdb3.dtb


Best Regards,
Ciprian